Life Technologies iBlot 2 Gel Transfer Device

Hoefer PS200HC High Current Electrophoresis Power Supply Voltage 5 to 200 V in 1 V step Current 10 t (more)o 2000 mA in 1 mA steps Maximum Wattage 200 W Features - Constant voltage or constant current mode with automatic crossover - 5 to 200 V, 10 to 2000 mA, 200 W - Four sets of 4 mm output jacks - Ideal choice for blotting applications - Continuous runs or 999 minute timer - Automatic recovery after power failure - Open circuit detection - Short circuit protection The Hoefer PS200HC High Current Electrophoresis Power Supply is an essential tool for large electrophoretic blotting applications and low voltage electrophoresis runs. Its compact design, large handle, and user-friendly interface make setup and operation simple, ensuring seamless integration into any lab. Featuring a large, easy-to-read LED display, the PS200HC allows users to set constant voltage or current parameters, adjust the timer up to 999 minutes, and start runs with ease. With a power range of 5 to 200 V and 10 to 2000 mA, this power supply delivers up to 200 W of reliable performance. The PS200HC operates in three distinct modes: Constant Voltage Mode, where the power supply maintains the user-selected voltage by automatically adjusting the current flow; Constant Current Mode, where it maintains the selected current flow by adjusting the voltage supplied; and Automatic Crossover, which ensures that when the constant parameter (voltage or current) cannot be maintained due to operating limits, the system switches to maintaining the other parameter. Key features such as automatic recovery after power failure, short circuit and open circuit protection, and four 4 mm output jacks enhance its flexibility and safety. Designed for both continuous operation and timed runs, the PS200HC is the ideal choice for dependable, high-current electrophoresis applications. INCLUDED: The Hoefer PS200HC High Current Electrophoresis Power Supply includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hoefer SE300 miniVE Integrated Vertical Protein Electrophoresis Basic Unit Compatible Glass Plate Si (more)zes (W x H) 10 x 10.5 cm or 10 x 8 cm Maximum Power Settings 1000 V, 500 mA, 50 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Quick, excellent results using minimal buffer - Passive cooling produces gels with straight lanes and sharp bands - Cast your own or use precast gels from a variety of manufacturers - Transfer up to 4 gels in 45 minutes with only 300 ml buffer using optional SE302 Blot Modules - Designed for use with a wide variety of precast gels The Hoefer SE300 miniVE Integrated Vertical Protein Electrophoresis Basic Unit is a reliable and compact solution for vertical protein electrophoresis and blotting applications. This sturdy system is designed for optimal performance, delivering quick, high-quality results with minimal buffer use. The SE300 miniVE features passive cooling that produces straight lanes and sharp bands, ensuring consistency and precision in protein analysis. It is compatible with a wide range of precast gels from various manufacturers, providing flexibility for different lab needs. The SE300 miniVE Basic Unit includes essential components such as the lower buffer chamber and gel modules with gaskets, making it ready for immediate use. The unit supports glass plates up to 10 x 10.5 cm or 10 x 8 cm and operates at maximum power settings of 1000 V, 500 mA, and 50 W. With user-friendly assembly and robust construction, the SE300 miniVE Basic Unit is an excellent addition to any lab focused on efficient protein separation and blotting. Please note: Glass plates, T-Spacers, and SE211A combs are not included and can be purchased separately. INCLUDED: The Hoefer SE300 miniVE Integrated Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber (tank) - Gel Modules with Gaskets, 2 assemblies - Safety Lid with High Voltage Leads - Well-Locating Decals, 2 pcs - Wonder Wedge Plate Separation Tool - Gel Seal - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hoefer SUB6 Mini Submarine Gel Electrophoresis Unit Gel Dimensions (W x L) 6 x 7.5 cm Maximum Power  (more)Settings 300 V, 200 mA, 60 W Maximum Buffer Volume 325 ml Features - Color-coded and height adjustable combs—easily identify comb thickness at a glance and control well depth - Colored loading strips—for easy well detection when loading - Compact tank—reduces the buffer volume required to cover the gel, providing greater control over the voltage gradient and run-time - UV-transparent running tray—allows the user to image the gel without risk of damage due to handling - Side handles—for safe and easy transportation around the laboratory The Hoefer SUB6 Mini Submarine Gel Electrophoresis Unit is a compact and efficient system tailored for routine nucleic acid preparatory and analytical electrophoresis. Designed for ease of use and consistent results, this unit can handle up to 32 samples per run, making it ideal for labs focused on high-throughput nucleic acid analysis. The SUB6 features a removable gel-casting tray with integrated silicone gaskets, allowing gels to be cast directly within the tank for a leak-proof setup. Equipped with color-coded, height-adjustable combs, the SUB6 enables easy comb thickness identification and precise control over well depth. The UV-transparent running tray allows users to image the gel without risking damage, while colored loading strips make well detection straightforward during sample loading. Its compact tank design reduces the buffer volume required, providing greater control over the voltage gradient and run time. Side handles ensure safe and easy transport around the lab, adding to the unit’s practical, user-friendly design. INCLUDED: The Hoefer SUB6 Mini Submarine Gel Electrophoresis Unit includes: - Buffer Chamber Assembly - Safety Lid - High Voltage Leads - Running Tray with Silicone Gasket* - 1 mm thick, 8-well combs, 2 pcs - Colored Loading Strips - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The redesigned Sub-Cell GT Electrophoresis Cell offers updated features that make electrophoresis ev (more)en easier. The Sub-Cell GT Ccell is the most versatile submerged horizontal electrophoresis cell in the Sub-Cell family. Because the Sub-Cell GT cell offers the greatest choice of gel lengths, sample combs, and separation modes, it is ideal for Southern and northern blotting protocols. Up to 30 samples can be resolved over a distance of 25 cm. Using four rows of combs, the cell will run up to 120 analytical samples. Cell size (WxLxH): 180 x 405 x 94 mm Gel tray sizes (OD) (WxL): 100 x 150 mm, 150 x 150 mm ReadyAgarose gels accommodated: No Sample throughput: 1 – 120 Base buffer volume: ~1 L Buffer recirculation: No Bromophenol blue migration: ~30 mm/hr (at 75 V) This electrophoresis power supply is recommended for basic applications such as submerged horizontal and mini vertical gel electrophoresis. It offers timer control and constant-voltage or constant-current output. Output range (programmable): 10 – 300 V, fully adjustable in 1 V steps 4 – 400 mA, fully adjustable in 1 mA steps 75 W (maximum) Type of output: Constant voltage or constant current with automatic crossover Output terminals: 4 pair recessed banana jacks in parallel Timer: 1 min – 99 hr 59 min, fully adjustable Pause/resume function: Yes Safety features: No-load detection, sudden load change detection, overload/short-circuit detection, overvoltage protection Input protection: Fuse on both hot and neutral Dimensions (WxLxH): 210 x 245 x 65 mm Weight: 1.1 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The XCell4 SureLock Midi-Cell is a midi-gel electrophoresis system that allows you to quickly and ea (more)sily perform simultaneous vertical electrophoresis of 1–4 midi gels. The Midi-Cell is built with tough polycarbonate to boost durability and features a specially designed lid to enhance user safety. The Midi-Cell is designed to dissipate heat effectively and evenly and ensure high-resolution results when using Invitrogen midi gels (8.7 cm x 13.3 cm). Easy to use—simple assembly and operation for ultimate in ease of use. A single SureLock actuator seals all gels while allowing for zero force insertion and easy positioning for sample loading. Flexible—run up to four midi-gels at once Efficient—requires 25% less running buffer per gel than the Criterion Cell (340 mL vs 460 mL) Gel Compatibility: Novex Midi Gels Gel Size: Midi (8 x 13 cm) Dimensions (DxWxH): 190 x 212 x 160 mm Weight: 700 g

Temperature range: -10°C to 200°C Temperature Stability: 0.01°C Pump type: Force Pump, Suction Pump  (more)Flow rate: 20L/min Max pressure: 475 mbar Cooling Capacity: 240w Capacity: 6 L Dimensions (LxWxH): 414 x 220 x 632 mm Interior dimensions (LxWxH): 124 x 137 x 150 mm Weight: 27.5 kg

The screen of the 5Y and CY10 terminal is made of glass – a material prone to scratches and cr (more)acks. It can easily be dropped or damaged by transport, so it is worth ensuring that it is properly protected. Safety in Every Inch Hybrid glass protects the touch panel of the ELLIPSIS and CY10 series devices terminal from scratches and cracks. It combines the advantages of glass and film: resistance and flexibility. It is perfectly matched to the balances’s display, so it provides the highest level of security to every inch of the screen. Antistatic Properties The Hybrid Protective Glass is not only scratch and impact resistant, but also antistatic. Thanks to its antistatic properties, the Hybrid Protective Glass prevents dust particles drawn by static electricity from sticking to the surface of the screen. Instant Responsiveness The hybrid protective glass allows instant response to touch. It does not affect the user experience of the terminal – it does not limit the sensitivity of the screen, does not reduce viewing angles and does not distort colors. Hybrid Protective Glass at a Glance: very thin – ~0.3 mm perfectly smooth durable – strengthens the screen by up to 250% scratch-resistant – glass hardness of 7H The Set Includes: hybrid protective glass leave that removes pollen from under the already applied glass positioning sticker to help fit the glass to the screen cardboard to eliminate air bubbles cleaning kit (moistened cloth and non-dusting cloth) You can buy and install the hybrid protective glass at any time. Installation is very easy and takes a while.

The HX7.4 C scale is a solution based on a stainless steel PUE HX7 terminal (AISI 304) and a powder  (more)coated 4-load-cell platform. The terminal The terminal is characteristic for a 7” colour graphic display. Its novelty is a red-green 9-diode bar graph presenting the current net mass in reference to the scale range or preset min and max thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing.

MA X2.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Termoreactor for analysis of COD Bioblock Scientific 1074. Capacity for 8 tubes of 16 mm diameter an (more)d 1 tube of 22 mm diameter. Operation to 100 or 145 ºC. Continuous operation or timer up to 120 min. Specifications: 230 V; 50 Hz; 270 W