Waters Acquity H-Class UPLC

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This CTC Analytics Leap HTC PAL Autosampler HPLC was removed from a university lab where it was surp (more)lus to requirements. All units are in good cosmetic condition and powered up. We are unable to test the system further at our facility. Autosampler consists of:Autosampler main unit MXY 01-01BSerial No. 113399 Power supply unit MN01-00 Injector unit MZ01-00DSerial No. 980 Control key pad/screen MB 01-00A 2 x pumps MV 02-01ASerial Nos. 2961, 2963 Sample tray 3 drawer storage MP 02-00B Needle wash unitBottle shelf

Perkin Elmer 200 Series HPLC System with PC & Software This was removed from a university lab wh (more)ere it was surplus. All the units power up and are in good cosmetic condition with minor marks. Perkin Elmer Series 200 UV/VIS DetectorModel - Series 200 UV/VIS DetectorS/N - 292N2073015Part No. - N2920010 Perkin Elmer Series 200 Vacuum Degasser 3 ChannelModel - P-E Series 200 Vacuum Degasser 3 channelS/N - 6417               (3 channel) Perkin Elmer Series 200 AutosamplerModel - Series 200 AutosamplerS/N - 293N2100705Part No. - N2930100 Perkin Elmer 600 Series Link Chromatography InterfaceModel - 600S/N - 600M02100805 Perkin Elmer Series 200 Peltier Oven Column SelectorModel - Oven S 200 Peltier W/SelectorS/N - OVC021015129 Perkin Elmer Series 200 PumpModel - Series 200 LC PumpS/N - 291N5092701Part No. - N2910101 Software Perkin Elmer Precisely - TotalChrom Workstation - Version 6.2.1Agilent OpenLAB Control Panel

This system was removed from a university lab where it was surplus to requirements. All units power  (more)up but this has not been tested further as a system. It is in reasonably good cosmetic condition with marks from use. Included are; 1x Waters Pump Control Module IIModel: PC2S/N: K05PC2 650E 1x Waters Temperature Control Module IIModel: TC2S/N: H05TC2 641E 1x Waters 515 HPLC PumpModel: 515S/N: L05515 088A 1x Waters Column Fluidics OrganizerModel: APCS/N: K05APC 452M 1x Waters 2767 Sample ManagerModel: 2767 SAMPLE MGR.Part no: 725000299S/N: H05XY6 738MSample tubes fit 16ml vials. 1x Samsung MonitorModel: 171S SS/N: GH17HJCTB07621N 1x AOC LCD MonitorModel: LM520 AS/N: T5GJ32AR05528 1x Fujitsu Siemens Mouse1x Acer Mouse1x Acer KB-0759 Keyboard1x BTC 5197 Keyboard 1x Applied Biosciences Programmable Absorbance DetectorModel: 785AS/N: 29511519 1x IBM ThinkCentre PCMT-M 8143-QGHS/N: LMPM2TKThe hard drive has been removed from the PC.We are certain it was paired up with Control Modules. 1x HP vw8400 WorkStationS/N: CZC7113H1HMassLynxMassLynx DiversitySirius Analytical Instruments 1x Waters Column Heater ModuleModel: CHMS/N: M05CHM174M 1x Waters Leak Sensor Module 1x Gilson 506C System Interface ModuleS/N: 369J8PA500 1x Waters Fraction Collector III Ver.W2.01Model: WFCS/N: D06WFC178J 1x Perkin Elmer Series 200 LC PumpS/N: 291N 5110302 1x S-Video Mini-DIN 4-pin1x RS-232C Serial Cable1x Control Cable Assembly1x SCSI I to SCSI II Cable1x Drive Cable 25 Pin male/male 1x Waters 2525 Binary Gradient Module Installation & Maintenance Guide1x Waters 2767 Sample Manager Injector Installation & Maintenance Guide1x Waters 515 HPLC Pump Operator's Guide1x Performance Maintenance Protocol 2007-20091x Waters Purification of Compounds - Using FractionLynx

Dionex Ion Chromatography System This was removed from a university lab where it was surplus to req (more)uirements. The system has been professionally serviced and is in good working order. A full report is available on request. It is in good cosmetic condition with minor marks. Included are; Dionex AS40 Automated SamplerModel: AS40-1Serial#: 98040160 Dionex IC20 Ion ChromotographModel: IC20Serial#: 99120293 Dionex LC25 Chromatography OvenModel: LC25Serial#: 0205041

CLIMATE CHAMBERS KKS SMART POL-EKO KKS - RELIABLE AND HIGHLY CUSTOMIZABLE Built and designed without (more) compromise, they are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 100°C and thanks to an steam humidifier, they regulate humidity from 10% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KKS Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm KKS SMART PRO SERIES POL-EKO offers 4 climatic chamber models with capacities from 109 to 749 litres. Unleash your possibilities. In the image below, the graph shows the excellent working range (humidity/temperature) that the POL-EKO climatic chambers are able to offer you, with the KK series (ultrasonic humidifier) ​​and with the KKS series (steam humidifier ). STEAM HUMIDIFIER The KKS climatic chambers with steam humidifier do not emit ultrasound and therefore allow the reproduction of insects (e.g. Drosophila melanogaster). Compared to KK chambers they have a wider temperature and humidity range and can be used for testing electronic components, plastics or building materials. NOTE: common water (conductivity 125-1250 μS/cm) can be used as a source. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Power cable 3 - Connectors 4 - Connection to tap water 5 - Connection to the reverse osmosis system 6 - Control valve 7 - Connection to demineralised water 8 - Connection to the drain 9 - Connection for assistance 10 - LAN port 11 - Fuse Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with panoramic window - Stainless steel wire shelf INOX - Perforated shelf - Reinforced shelf - Stainless steel basins - Internal socket - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access hole - Additional 30 mm access hole - Access control system (card, key tag or device equipped with NFC, for example smartphone) ◉ POL-EKO CUSTOMERS The SPEKTROCHEM research and development center for paints, adhesives and polymers has been a loyal POL-EKO customer for several decades. Use climatic chambers for tests on water-based raw materials prepared in the laboratory. FUN FACT? Thanks to the climatic chambers it is possible to create excellent food products, such as black garlic, which needs to ferment at stable temperatures and humidity. Download the informative pdf: Black Garlic with POL-EKO.

Scilogex DM1424 Hematocrit CentrifugeThe DM1424 Hematocrit Centrifuge with AC24P rotor is used for d (more)etermination of volume fractions of erythrocytes in blood and also for separation of micro blood and solutions. The DM1424 conforms to international safety standards and regulations.The SCILOGEX DM1424 centrifuge is certified with CE, cTUVus and FCC. MCA test according to IEC/EN61010-2-20 including explosion-proof and bio-safe tests. Passed EN61010-2-101:2002 requirements for invitro diagnostic (IVD) medical equipment. Features: High accuracy of speed, excellent performance CPU controls all operating parameters including speed and time RPM or G-force can be set and displayed Operation can be timed from 30 seconds to 99 minutes or continuous running Timer commences once the set speed is reached, so the separation time is more accurate Gentle braking at low speeds with efficient separation Parameters can be modified after the set speed is reached Quick spins are possible by pressing and holding PULSE key Automatic release the lid when operation has stopped to save processing time Easy-to-read backlit LCD processing display and sound alert Can be pulse accelerated and held at speed High strength aluminum hematocrit rotor included (optional fixed angle rotor for 1.5/2.0ml tubes) Brushless motor drive quickly and effortlessly accelerates the rotor to set speed 2 YEAR WARRANTY Click Here to View Product Video INCLUDED: The Scilogex DM1424 Hematocrit Centrifuge includes: - AC24P Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Motic PA53MET Trinocular Upright Industrial Microscope, 100W Reflected Illumination Objectives S-AP (more)O 5X, 10X, 20X, 50X Objectives Optical System Colour Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Expertly designed, carefully crafted, high-performance Motic objective lenses provide excellent clarity in any observation environment. - Intelligent, Sleek Design - Advanced ergonomic design, compact size, carefully sourced high-quality materials ensure durability. - Versatile digital capabilities minimize fatigue during extended periods of operation. - Innovative Module Design - The compact size of the PA53-MET minimizes required installation space. - Interchangeable individual modules meet the needs of any application. - You can select the appropriate optional accessories for your task: reflected light illuminators, transmitted light illuminators, XY stage, Z-axis, etc. The Motic PA53MET is a trinocular metallurgical microscope featuring a reflected intermediate illumination system suitable for bright field observation. It comes equipped with a 100W halogen lamp house and widefield eyepieces offering 10X magnification and a 25mm field of view. The device includes a coded quintuple revolving nosepiece for BF with a DIC slot, and Plan S-APO objectives at 5X, 10X, 20X, and 50X magnification. Additionally, the PA53 MET's design is highly modular, allowing for future upgrades with motorized components. Motic's PA53 MET series microscopes are tailored for industrial quality control and the analysis of opaque materials. They feature semi-apochromatic objectives that deliver sharp, clear images. The microscope's incident illumination supports various contrast methods, including Brightfield, Darkfield, Polarization, and DIC, revealing defects not visible under standard lighting conditions. INCLUDED: The Motic PA53MET Trinocular Upright Industrial Microscope, 100W Reflected Illumination includes: - S-APO S-APO 5X, 10X, 20X, 50X Objectives - Widefield (FN25) eyepiece 10X/25mm - 4x4 inch right hand stage with metal stage plate - PA-25ND6 neutral density filter and PA-25LB LBD filter - Widefield (FN25) eyepiece 10X/25mm - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z496-1L-A500S 500ml Flat Bottle, 69.5mm Dia Insert for Z496-1000-1L, 2/pk The Hermle Z496-1L- (more)A500S 500ml Flat Bottle, 69.5mm Dia Insert for Z496-1000-1L, 2/pk is for use with the Z496-1000-AC Swing Out Rotor and includes two 500ml adapters. INCLUDED: The Hermle Z496-1L-A500S 500ml Flat Bottle, 69.5mm Dia Insert for Z496-1000-1L, 2/pk includes: - 1 x 500ml Flat Bottle Adapters, 2 per pack - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark IPD9600-50T Adapter for 4 x 15/50ml tubes, pack of 2 The Benchmark Scientific Adapter for  (more)4 x 50 ml Tubes, Set of 2, is an essential accessory for laboratory procedures that involve 50 ml tubes. These adapters are specifically designed to work with the IPD9600 ball mill homogenizer, providing an efficient and reliable way to homogenize samples. The adapters are made of durable materials that can withstand the rigors of laboratory use and ensure a secure fit for the tubes during the homogenization process. With their easy-to-use locking mechanism, these adapters offer a quick and convenient way to set up and remove samples, allowing for faster processing times. Whether you are working with biological samples, tissues, or other research materials, the Benchmark Scientific Adapter for 4 x 50 ml Tubes is an excellent addition to your laboratory equipment.INCLUDED: The Benchmark IPD9600-50T Adapter for 4 x 15/50ml tubes, pack of 2 includes: - Operator's Manual - Manufacturer's Warranty