SI Analytics Xylem 7500 KF Trace Titroline Karl Fischer Titrator + TM235+

Metrohm 901 Titrando, 800 Dosino, and 803 TI Stand with Accessories This system was removed from a u (more)niversity where it was surplus to requirements. The system powers on and is in good working order. The 901 Titrando, 800 Dosino, and 803 TI Stand were tested with an in-house PC w/ software, and all components appeared to function as expected, including pH measurement, dosing, and stirring. The PC used for testing is not included in the system.The required software can be downloaded for free from the Metrohm website, but it will require a purchased licence after 30 days of use. Included: - Metrohm 901 Titrando - Metrohm 800 Dosino - Metrohm 803 TI Stand - Control cable for PC interface Specifications:Model: 901 TitrandoAccessories: 800 Dosino and 803 TI StandEverything is in good cosmetic condition with some light signs of use.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

10ml dosing set for Metrohm titrator. Available in clear and tinted glass.

Metrohm Exchange Unit 10 mL for the Titrando titration system 6.3026.210 Exchange unit with integrat (more)ed data chip with 10 mL glass cylinder and light protection. PCTFE/PTFE flat stopcock, FEP tubing connection, antidiffusion buret tip and standard amber glass or plastic reagent bottle. incl. 6.1609.000 Adsorbing tube, large and bent

This Mettler Toledo Titrator  Model - DL21 was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but we were unable to test it further at our facility. It is in reasonable cosmetic condition but the button panel is loose and needs to be glued back on. It's supplied with a serial cable.

This Sirius Analytical Instruments PCA 200 Titration System was removed from a university lab where  (more)it was surplus to requirements. The unit is in reasonably good cosmetic condition with some marks from use. The item powered on without issue and has been inspected by an engineer. The system is working fine and can be programmed to do some measurements but without the manual, we were unable to test it further.

Wild Heerbrugg M40 - 81431 Inverted Microscope with Sixtuple Turret and PSU This was removed from a  (more)university lab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with marks from use. The microscope features: 1 x binocular head V=1.5 head with 2 x 15X K Wild oculars 1 x six-fold turret 4 x objectives all Wild Heerburgg: Fluotar 10/0.40 Ph, 10/0.40, 21194 20/0.60, 40/0.75 d=0.17 Power supply included.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

PUE HX5.EX terminal is a constructional component of industrial multifunctional load cell scales. It (more) is the most modern RADWAG solution to be used in areas endangered with explosive atmosphere. The HX5.EX is compliant with ATEX directive regulations. The terminal is intended for operation in environment filled with explosive gases and dust, and can be placed in zones: 1/21 and 2/22. Standard version of the terminal is equipped with 2 serial intrinsically safe RS232 communication interfaces, and with one intrinsically safe RS485 interface. They facilitate communication with equipment predetermined for use in hazardous areas. Possibility to add digital inputs/outputs expands the range of instruments compatible with the terminal by robotic elements compliant with ATEX directive. For more demanding customers, RADWAG has developed IM01.EX module, installed in the safe area, which extends the available connector range by Ethernet, USB, 4-20mA/0-10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables communication between the terminal and external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Models There are 4 different models: PUE HX5.EX-1: 2 × RS232, RS485 - standard design, PUE HX5.EX-2: standard design + 4IN/4OUT, PUE HX5.EX-3: standard design + 4IN, PUE HX5.EX-4: standard design + 4OUT. Mechanical Design The housing, made of AISI 304 stainless steel, ensures high ingress protection, IP66 / IP68 (up to 1.5 m immersion). The terminal features 5" colour LCD, covered with polycarbonate protecting it against shocks, and a membrane keypad. Ease of operation, clear menu and intuitive information arrangement on the display guarantee comfort of operation. Hermetic intrinsically safe interface connectors are located on the back side of the housing. Stable bracket enables mounting the terminal either on a flat horizontal surface or on the wall. The device tilt can be easily adjusted. Power Supply The PUE HX5.EX terminal can be connected to the mains only with a certified intrinsically safe power supply, manufactured by RADWAG: PM01.EX-1 power supply intended for operation in hazardous area: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2 power supply intended for operation in safe area, equipped with intrinsically safe circuits which may be placed in: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. IM01.EX Communication Module The terminal’s interface range can be expanded using IM01.EX communication module, connected to the terminal via an intrinsically safe RS485 interface, placed outside the hazardous area. Models: IM01.EX-1 Standard: 2x RS232, USB,4 I/4 O, Ethernet IM01.EX-2 analog output 4-20mA/0-10V IM01.EX-3 12 I/12 O, digital IM01.EX-4 Profibus DP IM01.EX-5 PROFINET IM01.EX-6 CANopen (available soon) IM01.EX-7 DeviceNet (available soon) IM01.EX-8 RS485 IM01.EX: ETHERNET IP (available soon) Multifunctional Software Terminal software facilitates processes such as weighing, parts counting, dosing, and percent weighing. Terminal’s information system is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. The interfaces enable communication between the terminal and the accessories intended for operation in the hazardous and non-hazardous areas. Accessories: barcode scanners, printers, external displays, control buttons, light signalling towers and other controlling/signalling devices. The terminal can communicate with systems for automatic process control and superior IT systems.