Radwag PUE 7.1.1100.HRP.M2.1 High Resolution Scale

Stainless Steel HRP.H Platform Wherever high readability and precision are important. Wherever good  (more)repeatability in harsh industrial conditions matters. Stainless Steel HRP.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Unbreakable Stainless Steel HRP.H Platforms feature a modern electromagnetic mechanism design in a sealed steel housing and overload protection. The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. Stainless Steel HRP.H Platforms are distinguished by a high degree of protection IP 67. For an additional charge we will make HRP platforms in Ex version, but in order for the device to work in explosive areas, you need to supply the PUE HX5.EX terminal. Use the potential Stainless Steel HRP.H Platforms work with one of two weighing terminals: PUE HY10 or PUE 7.1. The terminals’ software enables you to archive your work results, ensures data safety, and allows the platforms to work with powerbanks from our offer. In turn, you will select appropriate antivibration tables for the platforms, and thus increase the readability of your measurements.

The ramps are used to easily place the trolleys containing loads onto the 4-load-cell platform scale (more)s. They enable placing the scale into the production line as a measuring or control workstation. Uncomplicated loading and unloading of the weighing platform allows smooth control over the loads and is time saving.

If you buy a High Resolution Scale PUE 7.1 by July 31, 2024, you will receive each of these products (more) along with a FREE lifetime license for the Workflow Module. High Resolution Scale The HRP high resolution scales feature a cutting-edge measuring system based on RADWAG MonoBLOCK® technology. It allows working with a readability of 1 g at a maximum capacity of 300 kg and 20 g at a maximum capacity of 2000 kg, with a repeatability of 3 g guaranteed. 9 advantages, 1 monobloc The ability to weigh loads up to 150 kg on a large pan with high readability and good repeatability, minimal eccentricity error over the entire range, fast and stable measurement (achievable within 1 second), stability of parameters over time and after transport, and a pan dimension adapted to the scale’s readability – all this is the result of using a measurement system based on improved technology. Repeatability not repeatable by others Automatic adjustment with an internal weight not only guarantees the best quality of work and repeatability of results, but also saves time and provides comfort. The HRP high resolution scales feature a cutting-edge measuring system based on RADWAG MonoBLOCK® technology. It allows working with a readability of 1 g at a maximum capacity of 300 kg and 20 g at a maximum capacity of 2 000 kg, with a repeatability of 3 g guaranteed. For such industries as pharmaceutical, chemical, food and… HRP scales are ideal for industrial conditions where high readability and repeatability of measurement are required, such as in the pharmaceutical, chemical and food industries. Choose a terminal HRP high-resolution scales can work with one of two industrial terminals: PUE 7.1 and PUE HY10. The PUE 7.1 terminal has: 5.7-inch color resistive display a touch-sensitive keyboard ABS plastic housing IP 43 protection rating communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, Wi-Fi®, optional additional modules: additional A/D converter module DP6. The PUE HY10 terminal features: 10.1-inch color graphic display touchscreen keyboard stainless steel housing IP 68/69 degree of protection communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, optional additional modules: Wi-Fi®, RS485, Profibus, Profinet, analog output module, 12 IN/ 12 OUT. The power of steel The use of stainless steel for weighing pan construction guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the HRP high-resolution scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Use the potential Barcode scanners, receipt printers, label printers or additional displays – thanks to multipurpose software, PUE 7.1 scale can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations, differential weighing, labelling, peak hold and statistics. The power of PUE 7.1’s working mods.

Stainless steel 4-load-cell ramp platforms, equipped with LD4N platform lifting system useful for ma (more)intenance purposes. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Four load cell stainless steel platforms The frame for recessing (foundation) is part of the set &nd (more)ash; you will receive it with the ordered platform.

Waterproof stainless steel platform We provide you with waterproof stainless steel platforms with re (more)adability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms are rectangular in 150 x 200 mm, 250 x 300 mm or 400 x 600 mm or square in 410 x 410 mm, 800 x 800 mm, 500 x 500 mm, 600 x 600 mm or 800 x 800 mm. Use the potential Our platforms can work with one of six weighing terminals to choose from: PUE H315, PUE C315, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. Fearless of its contact with moist objects or accidental splashes. The entire stainless steel construction translates into a high degree of protection for these platforms: IP 68.

This Panasonic Pharmaceutical Refrigerator  Model - MPR-1014R-PE was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and the lights are working. it was tested with a digital thermometer (not included). The temperature was set to 4˚c, when the display read 4˚c, the thermometer read 6.5˚c.The temperature could be set to a minimum of 2˚c which it dropped to quickly. It is in reasonably good cosmetic condition with some marks from sue. Inside dimensions - D47 W171 H125cm5 x Shelves - 86 x 46cm10 x Shelves - 39.5 x 36.5cm

TMC Micro-G 63-530 Antivibration Table Lab This item was removed from a university where it was surp (more)lus to requirement. It is in good cosmetic condition, we are unable to test it further at our facility.

PM Balances by RADWAG – Laboratory Precision Under Industrial Conditions Mono BLOCK® techn (more)ology The ability to weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability, minimum eccentricity error over the entire range, quick and stable measurement (achievable within 1 second), parameter stability over time and during transport, weighing pan dimensions adapted to the accuracy of the balance are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced MonoBLOCK® technology. The change in the design of the monoblock has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions. PM balances also include: robust design based on a larger and taller Monoblock, built-in 4-point overload protection system, IP 43 ingress protection, internal adjustment, 5" colour display, easy start-up, intuitive operation, and ergonomics. Application PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required. Under-Pan Weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

IKA VACSTAR Digital Vacuum Pump Maximum Flow Rate 22 L/min (1.32 m^3/h) Final Pressure 2 mbar Sucti (more)on Levels 4 Features - High suction capacity of the four-chamber membrane vacuum pump - Requires low space due to compact design - High serviceability features for ease of maintenance - Parameters are adjustable via a rotary-push button - Digital display indicates current rpm (rotations per minute) - Automated processes managed by the optional vacuum controller VC 10 - Includes analogue cable for pump-controller connection - VSE 1 vacuum safety emission recommended for additional security: Prevents solvent release into the environment - Ideal for dry and oil-free applications in laboratory settings - Membranes feature high chemical resistance The four-chamber membrane vacuum pump convinces with its high suction capacity, low space requirement and high serviceability. The setting of the parameters is carried out through a rotary-push button over a digital display showing current rpm. Automated processes are controlled with the vacuum controller VC 10, which is available as an accessory. An analogue cable which is required for connecting pump and controller is included in the delivery of the pump. Additionally it is recommended to use the VSE 1 vacuum safety emmission. It prevents that solvents are released into ambient air. The Vacstar digital is used for dry and oil-free applications in the laboratory. The membranes of the pump are particularly chemical resistant. INCLUDED: The IKA VACSTAR Digital Vacuum Pump includes: - Vacuum hose (1 m) - Silencer - USB A-B Cable - Connecting Cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA VACSTAR Digital Vacuum Pump Specifications Pump rate max. (50/60Hz)1.32 m³/hPump rate max. (50/60Hz)22 l/minFinal pressure without gas ballast2 mbarSuction levels4Cylinder4Connection diameter suction side8 mmConnection diameter pressure side8 mmInput pressure2 - 1030 mbarTwo-point controlyesAnalog speed vacuum controlyesSpeed controlTurning knob Speed range285 - 1200 rpm DisplayLED Noise at low. pressure54 dB(A)Material in contact with mediumAl2O3; PTFE; FFPM; PPS; NBRHousing materialalu-cast coating / thermoplastic polymerMode automaticyesMode manualyesMode pump %yesMode programyesDimensions (W x H x D)150 x 375 x 370 mmWeight11.5 kgPermissible ambient temperature5 - 40 °CPermissible ambient conditions80% (up to 31°C), decreasing linearly to max. 50 (@40°C)Protection class according to DIN EN 60529IP 20RS 232 interfaceyesUSB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input130 WPower input standby3 W

Edwards nXR40i NW25 Multi Stage Roots Dry Pump Ultimate Vacuum 0.03 mbar (0.022 Torr) Inlet Connecti (more)on NW25 Peak Pumping Speed 40 m 3h-1 Features - Lower input power consumption enhances performance and reduces operating costs - Dry pump technology ensures an oil-free, low-maintenance experience - Designed for seamless integration into various vacuum systems - Suitable for mass spectrometry, electron microscopy, and leak detection - Designed to fit under a benchtop, the nXRi saves valuable laboratory space with its small footprint - Offers up to six times more pumping speed than similar-sized dry pumps - Provides high reliability with consistent vacuum output, ensuring long-term stability for various applications - Easy to set up and operate ensuring accessibility for large number of users Edwards has revolutionised the vacuum pump market with the new nXRi high performance, compact dry pump. It delivers unrivalled pumping speeds in the most compact package, with pumping speeds of 30 to 120 m3h-1. The nXRi's lower input power and zero maintenance create real performance improvements and cost benefits across a range of applications.Analytical Instrument OEMs benefit from the ease of integration into most vacuum systems for a ready to go vacuum solution, perfect for mass spectrometry, electron microscopy and leak detection. R&D and Industrial customers will enjoy the design flexibility, oil-free and low maintenance features.Click Here to View Product Video INCLUDED: The Edwards nXR40i NW25 Multi Stage Roots Dry Pump includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty