Radwag H315.4.1500/3000.H9/Z Stainless Steel Platform Scale, Pit Version

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

This listing is for a Hanna HI93703C Logging Turbidity Meter. The unit is in full working condition (more) and is ready for immidate realese. The Hanna HI93703 Series Logging Turbidity Meters are advanced, microprocessor-based instruments designed to provide laboratory-level precision for turbidity measurements in field conditions. Perfect for environmental monitoring, water quality testing, and various industrial applications, these meters offer an easy and accurate solution for on-site turbidity testing. With its dual operating ranges, the HI93703 ensures versatility for measuring varying levels of turbidity, making it an essential tool for researchers, engineers, and quality control personnel. Key Features: Dual Operating Ranges: The HI93703 series features two measurement ranges: 0.00 to 50.00 FTUs for low turbidity and 50 to 1000 FTUs for high turbidity, accommodating a wide array of sampling conditions. Easy Calibration: The meter allows for straightforward 3-point calibration using AMCO-EPA standards, ensuring accuracy and compliance with ISO 7027 protocols. Enhanced Data Logging: The HI93703-11 model includes a real-time clock and the capability to log up to 199 measurements, facilitating efficient data collection and monitoring. Data Management: Collected data can be easily downloaded to management systems using the Windows® compatible HI92000 software, allowing for comprehensive data analysis and reporting. Good Laboratory Practice (GLP) Compliance: Both versions meet GLP requirements, ensuring last calibration data storage for regulatory adherence. Specifications: Measurement Range: 0.00 to 50.00 FTU 50 to 1000 FTU Resolution: 0.01 FTU (for 0.00 to 50.00 FTU range) 1 FTU (for 50 to 1000 FTU range) Accuracy: ±0.5 FTU or ±5% of reading (whichever is greater) Calibration Points: 3 points (0 FTU, 10 FTU, and 500 FTU) Light Source: Infrared LED Light Detection: Silicon Photocell Battery Type / Life: 4 x 1.5V AA batteries Approx. 60 hours of continuous use or 900 measurements Automatic shut-off after 5 minutes of non-use Operating Environment: Temperature: 0 to 50°C (32 to 122°F) Humidity: RH max 95% non-condensing Dimensions: 220 x 82 x 66 mm (8.7 x 3.2 x 2.6 inches) Weight: 510 g (1.1 lb.)

IKA HS 501 digital reciprocating shaker. Adjustable speed from 0 to 300 min-1. Orbit: 30mm. Maximum  (more)load: 15 Kg. Timer from 0 to 56 min. Includes two holding brackets. The HS 501 digital shaker accepts a maximum of 50 25mL flasks, 48 50mL flasks, 25 100mL flasks, 16 250mL flasks or 12 500mL flasks. Dimensions: 505x585x120mm. User manual. The IKA HS 501 digital reciprocating shakers have a large support surface and digital display. Continuous operation even with extreme loads. Ideal for all types of containers such as settling funnels and for applications such as extractions. Wide variety of optional supports to hold different containers.

Ohaus SHWV02AL Waving ShakerThe OhausSHWV02AL Analog Waving Shakers are an easy and economical optio (more)n for all ofyour waving needs. Ideal for cell culture and blotting applications, and isdesigned to be used in a variety of environmental conditions.The SHWV02ALis designed for use in a range of lab applications in a variety ofenvironmental conditions. Waving Shakers offer a smooth, low-foaming, 3D wavemotion for precise speed control. All models include a non-slip mat, and mostmodels are available with a stacking tray option.Microprocessorcontrol allows independent control knobs for tilt, speed and time.Timerdisplays elapsed time or when programmed to a set time, will turn off when timereaches zero.Speed rampingfeature slowly increases speed to desired setpoint to avoid splashing.Audible/visual signals activate when the system detects an obstruction or trayoverload. INCLUDED: The Ohaus SHWV02AL Waving Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

These roller mixers provide a gentle, but highly efficient, rocking and rolling action. Control is t (more)hrough a simple on/off switch and the unit will run continuously at the fixed speed of 33 rpm. Recommended for mixing blood samples, viscous substances and liquid-solid suspensions where minimum aeration is required. Units can be used in incubators up to 60°C and humidity up to 80%, or in cold rooms down to 4°C. Most sizes of tubes, Bijoux, Universals and bottles can be accommodated, up to 100mm diameter. Number of rollers: 10 Speed: 33 rpm Amplitude: 16 mm Maximum load: 3.0 kg Controls: Analogue Timer: No Roller size (l x diameter): 300 x 30 mm Attention 120V!