Radwag DWT/RC 10/HYF Checkweigher

Mettler Toledo IND690/PUA579 Checkweigher Lab Platform Scales PUA579-CS300 These were removed from a (more) working lab where they were surplus to requirements. The system powers up and is in good working order. it is in good cosmetic condition with marks from use. It comes supplied with 19 rolls of thermal receipt paper. ControlType - IND690 DeskSN - 3107324/2009 Type - PUA579-CS300SN - 3107323Dimensions - 120 x 105cm Printer type - GA46SN - 3107325

DWM HPE is a combination of a checkweigher system and a labelling system, designed for weighing and  (more)marking of products of variable weight. These parameters speak for themselves: Maximum capacity: 7,5 kg Readability [d]: 1 g Throughput: up to 60 pcs./min You See Everything Even From a Distance The device has been equipped with 12-inch, colour screen and a touch pannel. It can be programmed either using a terminal or remotely, with the Label Editor and E2R Checkweigher software run. Go for the solution which you find more convenient. And you design the labels from the Label Editor. Apply the Labels the Way You Like You can adjust the label application system to particular requirements of the production process of yours (application from the top, application from the side). To meet the most demanding requirements, we can apply tamp or blow label applicators mounted on the actuator or the rotary arm. Should you need to use metal detection and rejection systems, we can equip the device with them – its modular design allows that. You Want to Know What For You Need It? Well, the answer is this: mainly for industry. The DWM labelling checkweighers are intended for industry since it requires pre-packaged products of variable weight to be marked with labels including price. Our devices’ functions are as follows: Constant-weight product labelling, Variable-weight product labelling, Single/ bulk/ pallet label printing, Product sorting, Contamination check-ups, Weighed product record, Freely configurable report module. Plus, They Conform to Worldwide Standards The DWM labelling checkweighers have type approval accordant with MID directive and are tested in accordance with OIML R51 reccomendations. The software enables creation and printout of any labels, also those that include product price. Software Tools Label Editor R02 E2R Checkweigher

Sorting checkweigher for single loads, intended to be used on a sorting line. The DWM HPS checkweigh (more)er has been designed to comply with strict requirements for hygiene and for resistance to ambient conditions that are present on manufacturing lines in plants processing fish and poultry. Universal mechanic design guarantees that the DWM HPS can be adopted to needs of other branches of industry. Sorting checkweigher of RADWAG production is a hi-tech weighing device equipped with specialized automatics system providing precise and fast product separation. With electromagnetic weighing module, the DWM checkweigher guarantees high speed and precision of the weighing process. The automatic sorting checkweigher has been designed to provide self-acting product sorting process, wherein the products are separated into several groups varying by weight. Owing to the system functionality, the weighed products can be separated into 12 different weight groups. The system enables rejection of defective or faulty products. Depending on the used algorithm, the products can be grouped within specified weight or quantity range (the containers can be filled up to determined weigh value or product quantity). The DWM HPS is a solution carrying out simple operation of sorting and grouping of wide range of products in small and medium-sized companies. It may comprise additional buffering, storing and signaling systems. The device has been equipped with colour 12’’ touch screen easy to read for any working environment. An in-built self-diagnostic system monitors the DWM HPS operation and reports any detected problems in real time. Not only standard DWM HPS series is offered, this sorting checkweigher can be manufactured in a customized version suiting any customer needs. Owing to customization unlimited possibilities are provided when it comes to device dimensions and performance. Used modern industrial dual-core computer guarantees fast data analysis, high weighing throughput, and simultaneously performed connection of scale to a master computer system. The DWM HPS checkweigher features dedicated E2R computer system which facilitates real-time preview of scale state, remote databases update, preview of weighings carried out on the scale and remote reports downloading. The system allows analysis of recorded data, and generating statistics in accordance with self-adopted criteria. To learn more about DWM HPS sorting checkweigher call: +48 48 38 66 234 or write an e-mail: [email protected]

Automatic checkweigher DWT/RC/HYF series is dedicated to work on technological lines of food industr (more)y, where high humidity and frequent high pressure cleaning are the major issues. The construction has been designed to enable fast and easy cleaning. Special emphasis has been put on elimination of gaps, spaces and flat surfaces susceptible to condensates and waterstains. The structure of the conveyor belt allows washing it inside and outside without dissembling. The electronics has been placed high above the weighing platform for minimizing the possibility of inundation of the control panel. The checkweigher DWT/RC/HYF series is created in accordance with vertical space division. “Clean zone” ranges from the floor to the level of the conveyor belt (the area where food and production waste accumulates). “Technological zone” is placed above the production line. The control mechanism is based on a terminal HY series, facilitating easy communication between the operator and the machine and providing additional features. Standard functions: - Database of operators and products - RS 232/485 and Ethernet interfaces - I/O control - Current weighing statistics - Automatic printouts - Reports - Cooperation with computer software Additional functions: - Faulty goods discriminator - Barcode scanner - The checkweigher can be equipped with standard ink printers and labelling printers allowing to print the tags of the weighed products - Sounder and/or Warning tower lights - Cooperation with feeders, mounted to the front side, in a feedback system.

Automatic checkweigher DWT/RC/HYF series is dedicated to work on technological lines of food industr (more)y, where high humidity and frequent high pressure cleaning are the major issues. The construction has been designed to enable fast and easy cleaning. Special emphasis has been put on elimination of gaps, spaces and flat surfaces susceptible to condensates and waterstains. The structure of the conveyor belt allows washing it inside and outside without dissembling. The electronics has been placed high above the weighing platform for minimizing the possibility of inundation of the control panel. The checkweigher DWT/RC/HYF series is created in accordance with vertical space division. “Clean zone” ranges from the floor to the level of the conveyor belt (the area where food and production waste accumulates). “Technological zone” is placed above the production line. The control mechanism is based on a terminal HY series, facilitating easy communication between the operator and the machine and providing additional features. Standard functions: - Database of operators and products - RS 232/485 and Ethernet interfaces - I/O control - Current weighing statistics - Automatic printouts - Reports - Cooperation with computer software Additional functions: - Faulty goods discriminator - Barcode scanner - The checkweigher can be equipped with standard ink printers and labelling printers allowing to print the tags of the weighed products - Sounder and/or Warning tower lights - Cooperation with feeders, mounted to the front side, in a feedback system.

Overhead track scale H315 series is designed for weighing half carcass and porkhalf which are transp (more)orted on scale’s track. The weighing process starts when a roller with measured load enters a measuring section of the track. The load cells are installed lengthwise to the weighing track which is fixed with spherical mandrels. Such design eliminates tensions in the construction. Scales can cooperate with carcass grading equipment. The H315 series is manufactured either in galvanized or in stainless steel version, as dual range weighing instruments. They are equipped with a stainless steel backlit LCD indicator PUE H315 installed on a cable.

MARSHALL Select MS-CE12000 Hematocrit Centrifuge, 12,000 RPM Maximum Speed 12,000 RPM Maximum RCF 1 (more)4,170 × g Maximum Capacity Hematocrit Rotor: 24 x capillaries Features - Reaches up to 12,000 RPM for efficient hematocrit determinations - Streamlined and practical with an all-steel structure for durability and safety - Space-saving design suitable for various laboratory settings - Features an integral food-grade silicone ring to prevent aerosol overflow - Includes detection functions for door lock and motor status - Push-button programming with digital display for easy parameter settings The MARSHALL Select MS-CE12000 Hematocrit Centrifuge, a high-performance centrifuge engineered to meet the demanding requirements of immunohematology and research laboratories. Operating at a maximum speed of 12,000 RPM, this centrifuge specializes in the accurate determination of hematocrit (HCT) values by centrifuging anticoagulant-treated whole blood in disposable capillary glass tubes. After a brief 5-minute spin, the proportion of red cells is measured against the total volume of blood, allowing precise analysis of the blood's hematocrit level. The machine's ergonomic, streamlined design not only ensures practicality and safety with its all-steel structure but also enhances the aesthetic appeal of any laboratory setting. The MS-CE12000 is not just robust but also intelligently designed for ease of use and safety. It features a compact, space-saving footprint and is equipped with an integral food-grade silicone sealing ring to prevent aerosol overflow, safeguarding the operator. The centrifuge boasts electromechanical integration for its door lock, ensuring reliability and safety during operation. Additionally, its user-friendly interface includes push-button programming and a digital tube display for setting and monitoring centrifugal speed and time. With real-time detection systems for door lock and motor status, complemented by an alarm function for enhanced diagnostic safety, this centrifuge is an essential tool for modern laboratories focused on hematology and cytology. INCLUDED: The MARSHALL Select MS-CE12000 Hematocrit Centrifuge, 12,000 RPM includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The MWMH Manager is designed to enable operation of HRP platforms and weighing modules of MWSH, MW (more)LH and MWMH series by means of a PC. The program facilitates mass readout, taring, zeroing, filters setting, internal adjustment, determination of operator’s start mass and user adjustment. Caution: .NET framework 2.0 plugin or later version has to be installed so that the program can operate in MS Windows. The latest software version: 1.0.7.4 Functions: Adjustment of HRP platforms and MWSH, MWLH and MWMH modules, Mass readout from HRP platforms and modules via a computer, Taring and zeroing of HRP platforms and modules via a computer, Weighing filters setting for HRP platforms and modules. ALIBI memory operation, Operation of 3-range verified weighing instruments.

BIOBASE BKM-P18III tabletop autoclave. Capacity 18L. Chamber size: Φ260x270mm. Self-adjustment of te (more)mperature and sterilization time, audible alarm at the end of the cycle. Possibility of manual adjustment of these parameters. Working temperature of 126℃. Working pressure 1.42 bar. Timer from 1 to 99 min. Double slot manometer, double temperature and pressure scale. Automatic protection against overtemperature and overpressure. Water level indicator with anti-drying protection. Power supply: AC 220V / 50Hz. Power consumption 2Kw. Weight 12 kg. User manual. The Biobase BKM-P18III portable autoclave is a reliable and efficient sterilization equipment. With a capacity of 18 liters, this autoclave is perfect for small to medium-sized laboratories, clinics and hospitals. It features a compact and portable design, making it easy to transport and use in different locations. In addition, it offers a wide range of sterilization functions, With its intuitive control panel and LCD display, it is easy to operate and monitor. The Biobase BKM-P18III portable autoclave is an ideal choice to ensure effective and safe sterilization of medical instruments and materials.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW