Brookfield LVDV-III Ultra Cone Plate Rheometer

This Bohlin Rheometer was removed from a university lab where it was surplus to requirements. The la (more)b reported it was a complete Bohlin CS set with measurement head, control unit and thermo unit with cables and hoses. It was reported as been barely used by the university. Included in the system are;1 x Electronic Unit 1 x Controlled Stress Rheom1 x Temperature Control Unit (Type - 200 023 No. 3064) Cables and hoses. The units have been powered on but not tested further. Everything is in reasonable cosmetic condition but with marks from use.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The HR-1 is a rugged, accurate, field-proven rheometer. The HR-1 shares the cutting-edge technology  (more)of the Discovery Hybrid Rheometer family in a platform that is ideal for production control, asphalt manufacture, and a wide range of general measurements of viscosity and viscoelasticity. Bearing Type, Thrust: Magnetic Bearing Type, Radial: Porous Carbon Motor Design: Drag Cup Minimum Torque Oscillation: 10 nN.m Minimum Torque Steady Shear: 20 nN.m Maximum Torque: 150 nN.m Torque Resolution: 0.1 nN.m Minimum Frequency: 1.00E-07 Hz Maximum Frequency: 100 Hz Minimum Angular Velocity: 0 rad/s Maximum Angular Velocity: 300 rad/s Displacement Transducer: Optical encoder Displacement Resolution: 10 nrad Step Time, Strain 21: 15 ms Step Time, Rate RI: 5 ms Normal/Axial Force Transducer: FRT Maximum Normal Force: 50 N Normal Force Sensitivity: 0.01 N Normal Force Resolution: 1 mN

Speed range: 0.01 RPM increments from 0.01 to 0.99 RPM, 0.1 RPM increments from 1.0 to 250 RPM. Temp (more)erature accuracy: ± 1.0°C from -100°C to 150°C ± 2.0°C from +150°C to 300°C. Sample Volume: 5 mL Shear Rate: 7.5N (sec-1) Viscosity Range: 1 – 3K cP Viscosity Accuracy: ± 1.0% of full scale range. Viscosity repeatability: ±0.2% of full scale range. Dimensions(H x W x D): 588 (max) x 300 x 400 mm.

Chloride Portable Photometer HANNA HI96753 New equipment in its original packaging Chloride Range :  (more)0.0 a 20.0 mg/L (ppm) Chloride Resolution : 0.1 mg/L (ppm) Chloride Accuracy : ±0.5 mg/L ±6% de la lectura Chloride Method : Adaptación del método de tiocianato de mercurio (II) Total Chlorine Range : 0.000 to 0.500 mg/L Total Chlorine Resolution : 0.001 mg/L (ppm) Total Chlorine Accuracy : ±0.020 mg/L ±3% of reading Chlorine Method : adaptation of the USEPA method 330.5 Photometer/Colorimeter Light Source : tungsten lamp Photometer/Colorimeter Light Detector : silicon photocell with narrow band interference filter @ 525 nm Battery Type/Life : 9V battery Automatic Shut-Off : after ten minutes of non-use in measurement mode; after one hour of non-use in calibration mode; with last reading reminder Environment : 0 to 50°C (32 to 122°F); RH max 95% non-condensing Weight : 360g (12.7oz.) Dimensions : 193 x 104 x 69 mm (7.6 x 4.1 x 2.7”)

Operated by software designed to comply with 21 CFR Part 11 guidelines, the 400-DS offers convenien (more)ce, increased throughput, and efficiency to your QC and R&D operations. A variety of standard and custom holders are available like drug-eluting stents, pacemaker leads, medicated contact lenses, catheters, and more. Performs automated small-volume dissolution testing using as little as 3 mL media volume in either 5 or 10 mL sample cells Saves time by simultaneously testing up to 13 samples, or 12 samples and a control or standard, while providing users direct visibility of each dissolution cell Maintains temperature control through internal temperature probes and external heating jackets—no water bath is required Minimizes evaporation through the fully closed system Integrated syringe pump and autosampler save valuable bench space Offers automated media addition/removal of up to five different types of media through a port on the bottom of the cell Enables sample holder reciprocation through an externally controlled magnetic plate and supports between 1 and 35 dips per minute (DPM) to best match your requirements Accommodates 12 individual sample rows with either 2 or 4 mL HPLC vials for unattended sample collection Allows you to program up to 36 timepoints and five different media types into a method, with software prompts for the removal and replacement of the racks during the run Automates full or partial media replacement at each timepoint via a built-in fluidics module for each sample cell 21 CFR Part 11 compliant software and a single PC can independently control up to four 400-DS systems

Temperature range: -10°C to 200°C Temperature Stability: 0.01°C Pump type: Force Pump, Suction Pump  (more)Flow rate: 20L/min Max pressure: 475 mbar Cooling Capacity: 240w Capacity: 6 L Dimensions (LxWxH): 414 x 220 x 632 mm Interior dimensions (LxWxH): 124 x 137 x 150 mm Weight: 27.5 kg

IKA C-MAG HS 7 hotplate stirrer. 180*180 mm glass-ceramic hotplate. Stirring capacity 10 L. Speed ra (more)nge from 100 to 1500 rpm on a scale from 0 to 6. Temperature range from 50 to 500 °C. Heating rate 5 °C/min. LCD indicator. Fixed 550 °C safety circuit. Hot surface warning. to protect against burns. Digital indicator of error codes. It has small defects in the paint due to splashes. Dimensions (W x H x D) 215*105*330 mm. Weight 5 kg. User manual. IKA C-MAG HS 7 hotplate stirrer. New magnetic stirrer with heating and glass ceramic hotplate, characterized by very high chemical resistance.

Ohaus i-D33XW30C1R6 AM Defender 3000 Washdown Bench Scale, 60 lb., 0.01 lb. Maximum Capacity 60 lb ( (more)30 kg) Readability 0.01 lb (5 g) Platform Size 14 in x 12 in (355 mm x 305 mm) Features - Weighing, Checkweighing, Counting, Totalization - 7 Segment LCD with multicolor backlight - Internal power supply with power cord or rechargeable battery - Standard RS232 and optional USB device or ethernet - 304-grade stainless steel platform and frame, stainless steel IP66 indicator, IP67 load cell, non-slip adjustable rubber feet - 150% overload protection - 2 Year Manufacturer's Warranty