Foster + Freeman Foram 685-2 Forensic Raman Spectrometer w/ PC & Software

This Thermo Spectronic Genesys 10 VIS UV/VIS Spectrometer was removed from a university lab where it (more) was surplus to requirements. This item powers on and is in good cosmetic condition, it has not been tested further. Lamp hours: 438.88

This Thermo Finnigan LCQ Deca XP Plus Mass Spectrometer was removed from a university lab where it w (more)as surplus to requirements. The unit is in good used cosmetic condition but it does have various marks and signs of general use. The main board and mains switch have now been removed and sold. Not all the cables/connectors etc were re-connected during re-assembly. The following other parts were also removed; - Power supply, Serial No: 9001305 008, Model No: SDS400-3628-1, SSI P/N: 20-0049-015N - Multifan 4394, GB-PAT: 2133082 2075288, ASSY by PAPST in Hungary   - Dynode FINNIGAN P/N: 97000-98042 REV-C  - Aux valve TYPE: DEMB3628028, S/N: 237085000104  - 5kV power supply 97000 10070C  - Ion Gauge   - LED front panel + 4 screws ASSY No: 97000-61400 REV-C  - Vent Delay PCB panel ASSY No: 97000-61370 REV-A It also comes with;1 x LCQ Hardware Manual.2 x Vacuum hoses with breeze hose clamps.Various other front assembly parts. This is sold for spares/repairs

This Thermo Spectronic Genesys 10 VIS UV/VIS Spectrometer was removed from a university lab where it (more) was surplus to requirements. This item powers on and is in good cosmetic condition, it has not been tested further. Lamp hours: 438.88

Varian 660-IR FT-IR Spectrometer This item was removed from a university where it was surplus to req (more)uirement. It is in good cosmetic condition and powers on, it has been seen by an engineer with a summary of the report stated below. The beam splitters showing signs of moisture damage, and the unit has software recognition issues.As a result, it is listed as Spares/Repair.

Thermo Elemental X Series ICP-MS Mass Spectrometer w/ Software & Accessories This was removed fr (more)om a university lab where it was surplus to requirements. The unit powers up but we were unable to test it further at our facility. We are told it was working when it was last used in 2020. It is in good cosmetic condition with minor marks. Included with it are; Original software on CD-ROM X Series PlasmaLab 2.6 ICP-MS softwareSeveral manuals, safety, performance and maintenance schedule, pre-installation and operationNew and used spare skimmer and sampler conesSpare electron multipliernew and used spare printed circuit boardsVarious tubing and connectorsPacket of various Thermo O ringsMany other unidentified small parts in sealed packaging

This was removed from a university lab where it was surplus to requirements. The system powers up an (more)d communicates with the PC and Software. It has not been tested further. It is in good cosmetic condition with minor marks. Applied Biosystems MDS SCIEX QSTAR EliteAssy no. 1017064SN - AP10870612 Parts inside identified:-2 x Oerlikon Leybold Vacuum Turbovac Wide Range TW 690 MS1 x Leybold Vacuum Turbovac TW 250 S1 x SCIEX Turbo Ionspray, Assy no. 019296, SN - 0550009281 x Inficon VGC0231 x Spellman Unit1 x 024143 Nanospray Switch Module Pump on wheels:-MDS SCIEX Assy no. 022832, SN - 70208570839 Pump Inside unit:-Varian DS 602, Model 949-9335, SN - 245808With Varian Oil Exhaust Filter NW25 coming out of topModel - 949-9392Powers on and appears to be in working condition. Dell PC:-MDS SCIEX PN - 1018761Computer - P670 with ImageComes with Dell 17" Monitor,Keyboard & MousePC Powers on and has Analyst QS 2.0 SoftwareUsername - Administrator, No Password Spare parts & accessories:-1 x SCIEX Ion Sprayer, Assy no. 017614, SN - 08610507071 x SCIEX Heated Nebulizer, Assy no. 014989, SN - 219970226 w/ Assy no. 14368, SN - 3119703121 x Part 022765-B CFN 06851 x Box labelled Maldi Plates, contains 2 x AB PN:4347689 & Approx 50-60 plates1 x Box labelled Nano flow head with part inside1 x CS Lilin PIH-090 9" Monitor (SN-0000553) - Powers on1 x ULTRAK 9" Video Monitor Model - KM0900MN, SN - M2060084 - Powers on1 x Ionwerks TDCx81 x SCIEX PN - 1009917, SN - 000519 - Powers on1 x Box labelled QStar Elite RF Coils w/ parts 1003097 B & 1003098 B attached to SCIEX Filterboards1 x MDS SCIEX PCB Interconnect, 022102-D, CFN2 x Boxes labelled QStar elite parts - Full of small parts2 x Leybold Vacuum TurboVac TW 690 MS1 x 024143 Nanospray Switch Module1 x 1002133 Signal Handling Module1 x Harvard Apparatus Cat no. 98-0921, SN - 148161 x Inficon VGC023, SN - 399-557 - Powers on2 x Oerlikon Leybold Vacuum Turbo Drive 690 MS1 x Oerlikon Leybold Vacuum TW 250 S, SN - 209004514962 x SCIEX Turbo Nanospray, Assy no. 019296, SN - 037000911 & 113500701221 x SCIEX Ionspray, Assy no. 017614, SN - 6560307081 x QLP 022353-A1 x Spellman PN - X3359, Model - CZE5PN37X3359, SN - 52760-1-A00295 - Powers on7 x Gold Modules:-QPS Amplifier 1010829CCPS 1017191Lens PS 1024829QPS Exciter 1008444System Controller 1008411DACS & Vaccum Gauge 1024717HVPS 1012202 5 Folders of Manuals, service records, Hardware guides and Logbooks

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Perkin Elmer TurboMass Gold AutoSystem XL GC-MS System & Accessories Lab This was removed from a (more) university lab where it was surplus to requirements. The system powers up and is in good cosmetic condition, although it has been seen by an engineer who has reported this item is not in working condition, therefore, it is listed as Spares/Repair. The transfer line has been removed. Included are; Perkin Elmer AutoSystem XLModel: AutoSystemXLSerial#: GION2031503 Perkin Elmer TurboMass GoldModel: TurboMass GoldSerial#: 647N2032301 Also included is the following: TurboMassGC Mass SpectrometerSoftware Guide TurboMatrixHeadspace SamplersInstrument Manual TURBOMASS GOLD GC/MSHardware Guide TURBOMASS GOLD GC/MSTutorial TurboMassGC Mass SpectrometerHardware Guide TurboMassGC Mass SpectrometerUser's Tutorial AutoSystem XL GCUser's ManualVolume 2 ATD 400Automated Thermal DesorberUser's Manual TurboMassGC MASS SPECTROMETERUser's Tutorial AutoSystem XL GCUser's Manual Volume 1 Clarus" GC/MSManualsV5.4 TurboMatrixHeadspace SamplersInstrument Manual

Fluorescence microscope Leitz Laborlux 12. Binocular. Clear field and fluorescence. Köhler lighting. (more) 10x eyepieces. Objectives corrected to infinity: EF 10 / 0.25; EF 25 / 0.50; EF 100 / 1.25 OEL; Fluoreszenz 40 / 0.75; Fluoreszenz 63 / 1.30 OEL. Leitz 301-180 power supply for fluorescence. Fluorescence filters: Blue Ex 490 nm / Em 515 mn; Green 520 nm / Em 630 nm. XY coaxial platform. Transmitted lighting White lighting with halogen lamp 6V 20 W. Fluorescent lighting with mercury lamp HBO 100W.

Dust-free cabinet is applicable as means of protecting the printers against operation in heavily dus (more)ted areas. The airtight shield made of stainless steel protects a printer against defects, and allows for operation in not adapted places.

Pfeiffer HiCube 80 Neo, 63 CF, MVP 030-3 Turbo Pumping Station Final Pressure 1 x 10-8 hPa / 7.5 x  (more)10-9 Torr / 1 x 10-8 mbar Backing Pump Speed 1.8 m³/h / 1.06 cfm / 30 l/min Pumping Speed for N2 67 l/s Features - Compact series of pumping stations for all high vacuum applications - Simple operation with 7in. touch display - Remote control via web server available - Compatible with a wide variety of applications - Reliable and robust The Pfeiffer HiCube 80 Neo, 63 CF, MVP 030-3 Turbo Pumping Station is a compact, high-performance system designed for all high vacuum applications. Featuring a user-friendly 7-inch touch display for easy operation, it also offers remote control via a web server. This versatile system is compatible with a wide variety of applications, delivering both reliability and robust performance in demanding environments. With a final pressure of 1 x 10-8 mbar mbar and a pumping speed of 67 l/s for nitrogen, the HiCube 80 Neo ensures efficient vacuum generation. The MVP 030-3 backing pump provides a pumping speed of 1.8 m³/h, with air cooling to maintain peak performance. Operating at a quiet ≤50 dB(A) and suitable for worldwide use, this turbo pumping station is an excellent choice for laboratories and industrial settings requiring dependable high-vacuum performance. INCLUDED: The Pfeiffer HiCube 80 Neo, 63 CF, MVP 030-3 Turbo Pumping Station includes: - Backing Pump - Pfeiffer MVP 030-3 Diaphragm Pump - Protective Cap for High Vacuum Flange - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA KS 130 Basic Shaker Type of Movement Orbital Speed Range 0 - 800 rpm Shaking stroke 4 mm Featu (more)res - Compact and flat reciprocal shaker with ideal swivel motion - LED display for precise speed and time adjustment - Supports a maximum shaking weight of 2 kg - Accommodates a wide range of attachment combinations for various vessel sizes and shapes (attachments sold separately) - Suitable for both timer (5 - 50 min) and continuous operation The IKA KS 130 Basic Shaker is a compact and durable orbital shaker designed for quiet operation and long-term reliability in laboratory settings. With a maximum shaking weight capacity of 2 kg and a 4 mm shaking stroke, it offers electronic speed and timer adjustments via an intuitive LED display. This shaker supports a wide range of attachment combinations to accommodate various vessel shapes and sizes (attachments sold separately). Operating in both timer and continuous modes, it includes essential components such as a single-head wrench and comes backed by a comprehensive warranty for peace of mind. INCLUDED: The IKA KS 130 Basic Shaker includes: - KS 130 basic - Single-head wrench - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA KS 130 Basic Shaker SpecificationsType of movementorbitalShaking stroke4 mmPermissible shaking weight (incl. attachment)2.0 kgMotor rating input45 WMotor rating output10 WPermissible ON time100 %Speed min (adjustable)80 rpmSpeed range0 - 800 rpmSpeed displayLED lineTimeryesTimer display LED lineTime setting range 5 - 50 minOperating modetimer and continuous operationDimensions (W x H x D)270 x 98 x 316 mmWeight8.8 kgPermissible ambient temperature5 - 50 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage220 - 240 / 100 - 120 VFrequency50/60 HzPower input45 WComparison of ModelsSpecificationsIKA KS 130 Basic ShakerIKA KS 130 Control NOL ShakerIKA KS 130 Control ShakerIKA KS 260 Basic ShakerIKA KS 260 Control NOL ShakerIKA KS 260 Control ShakerIKA KS 501 Digital ShakerShaking Stroke4 mm4 mm4 mm10 mm10 mm10 mm30 mmPermissible Shaking Weight (incl. attachment)2.0 kg2.0 kg2.0 kg7.5 kg7.5 kg7.5 kg15 kgMotor Rating Input45 W45 W45 W45 W45 W45 W70 WSpeed Range80 - 800 rpm80 - 800 rpm80 - 800 rpm50 - 500 rpm10 - 500 rpm10 - 500 rpm0 - 300 rpmTimerYesYesYesYesYesYesYesTime Setting Range5 - 50 min1 - 599 min1 - 599 min5 - 50 min1 - 599 min1 - 599 min1 - 55 minDimensions (W x H x D)270 x 98 x 316 mm270 x 98 x 316 mm270 x 98 x 316 mm360 x 98 x 420 mm360 x 98 x 420 mm360 x 98 x 420 mm505 x 120 x 585 mmRS 232 InterfaceNoYesYesNoYesYesYesAnalog OutputNoYesYesYesYesYesYesVoltage220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V230 / 115 / 100 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }Request a Formal Quote