Horiba LA-920 Laser Scattering Particle Size Distribution Analyzer Lab

Lasers: Blue Solid State: 488 nm, 55 mW, Software Controlled Red Solid State Diode: 638 nm, 50 mW, S (more)oftware Controlled Violet Solid State: 405 nm, 80 mW, Software Controlled Configuration: Nominal 90 µm spatially separated beam spots Flow cell: 430 µm x 180 µm rectangular channel Collection optics: Fixed integrated optics and quartz flow cell design with a numerical aperture of > 1.2 Detector filters: Forward Scatter: 488/20 Blue Laser: 525/40, 575/30, 614/20 , 675/20, 695/30, 755LP Dyes: FITC, PE, ECD, PC5 or PEC5.5, PECy7 Red Laser: 660/20, 725/20, 755 LP Dyes: APC or Alexa Fluor 647, APC-Alexa Fluor 700, APC-Cy7, APC-Alexa Fluor 750 Violet Laser: 450/50, 550/40 Dyes: Pacific Blue, Krome Orange Forward Scatter Detector: Fourier design providing up to 3 measurements of forward angle Side Scatter Detector: High performance photodiode with electronic attenuation Fluorescence Detectors: FL1 – FL6 Fluorescent Detectors Flow rates: Continuous pressure is applied to the sample tube based on user selected flow rates: Low, Medium and High Performance: Carryover: < 0.1%, Dead volume as low as 2 µL when using Beckman Coulter 12 x 75 mm polypropylene tube and adjustable probe Acquisition modes: 32 tube Multi Carousel Loader (MCL), Single tube sampling mode, Automated work list acquisition, Manual work list mode Mixing: The MCL vortexes each tube individually before sample acquisition Barcode reading: Carousel number, tube location, and tube barcode verified to worklist Biosafety: Biohazard contained wash station thoroughly rinses sample probe Throughput: 10000 normal leukocytes is 82 tubes/hour Scatter resolution: Resolves 0.4 micron particles from background noise using Forward Scatter, Maximum detection of up to 40 microns Fluorescence sensitivity: FITC < 107 MESF, PE < 64 MESF, PC5 < 13 MESF Acquisition rate: 25000 events per second, 90% yield Cytometer dimensions (WxHxD): 950 x 610 x 730 mm Cytometer weight: 104 kg Supply cart dimensions (WxHxD): 724 x 298 x 495 mm Supply cart weight: 30 kg Software included but requires a new licence purchase.

MoFlo Astrios EQS Cell Sorter in BSL Hood. All units are in good used cosmetic condition. The system (more) powers up as it should. We were informed by the lab that the Red laser is faulty and requires replacement. The unit has the following lasers installed: 1 X 640NM - 106MW.1 X 561NM - 202MW.1 x 488NM - 200MW.1 X 405NM - 55MW. The writing is quite faint on the MW output, so the above figures might not be 100% correct. The complete system consists of: 1 x Baker Company SG503HE-BC-INT SterilGARD hood.Manufactured 09/30/2013. 1 x Moflo Astrios EQS Main Unit.The unit has various marks and scratches from general use.Powers up fine. 1 x Moflo Astrios Lower/Laser/Computer Section.The laser &amp; computer system powers up fine. 1 x Thermo/Haake SC100/A28 re-circulator/chiller.Powers up fine. 1 x Intellipower UPS.Powers up fine. 1 x Jun-Air OF302 Silent Air Compressor.It was noted by the lab that this is quite loud. We powered it on and it sounds normal for one of these units. Also includes various spares and accessories shown in pictures.3 x '100' spare nozzle tips8 x '70' spare nozzle tips.

This Turnkey Instruments OSIRIS Environmental Particle Monitor &amp; Tripod Housing was removed from (more) a university lab where it was surplus to requirements. The item powers on and is in reasonable used cosmetic condition. It has not been tested further at our facility. It comes in a carry case with a power supply, USB cable &amp; other small parts/fittings. There is a software disk included. Housing Tripod Height - 135cm

Particle Plus Handheld 8303 This item was removed from a university lab where it was surplus to requ (more)irements. The unit powers up and is in good cosmetic condition, we are unable to test it further at our facility. Item includes the following: Certificate of calibrationPower Supply 15V ~2amp 100-240VACCarry caseTripod and plateUSB Cable 6'&nbsp;

Climet CI-1054 100 LPM Particle Counter Lab This item was removed from a university where it was sur (more)plus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item also includes the following: Climet CI-S51 100 LPMKingston USB Porous media corporation Filter

Climet CI-154 1 CFM Particle Counter This was removed from a university lab where it was surplus to  (more)requirements. The unit powers up and is in working order. it is in good cosmetic condition with minor marks.

Dimensions (WxDxH): 1300 x 860 x 2300 mm Internal dimensions (WxDxH): 1200 x 585 x 700 mm Must be co (more)nnected to an extraction channel.

29x ADInstruments PowerLab/200 with Software Lab All items have been removed from a university where (more) it was surplus to requirement. They are all in good cosmetic condition and power on, we are unable to test them further at our facility.

Grant SUB 36 thermostatic waterbath. Capacity 36 L. Ambient temperature range +5 °C to 99 °C. Stabil (more)ity of ± 0.1 °C and uniformity of ± 0.2 °C. Display resolution 1 ºC. Stainless steel tank and digital control. Over-temperature protection and automatic cut-off. External dimensions (LWH): 720*325*300 mm. User manual. *Note: the temperature probe shown does not belong to the equipment. The Grant SUB36 Thermostatic Bath is a 36-litre unit designed to maintain consistent, accurate temperatures in laboratories. Ideal for viscosity testing and thermometer calibration, it offers precise temperature control with an easy-to-use digital display. Its durable, corrosion-resistant construction ensures reliability, while its compact design makes it suitable for laboratories with limited space. Versatile and efficient, the Grant SUB36 ensures consistent, accurate performance in a variety of laboratory applications.

F2-class mass standards represent an impressive level of precision in mass measurement. Classified a (more)s metrology grade F2, they are recognized as top-quality tools suited for advanced applications where precision is a key element. F2 mass standard: stainless steel wire Nominal value: 2 mg Material: stainless steel Exceptional Measurement Precision F2 class mass standards feature excellent measurement precision achieved through stringent standards for allowable deviation from actual weight. Stability under Dynamic Conditions An important feature of F2-class mass standards is their ability to maintain measurement stability even under dynamic measurement conditions. They are designed to cope with a variety of factors that affect measurement precision. Calibration at the Highest Level The calibration process of F2-class mass standards adheres to the most stringent norms and standards. This makes the standards of this class recognized as tools with the highest degree of accuracy, complying with international requirements. Use of Materials with Outstanding Properties F2 class mass standards are often constructed from materials with outstanding physical properties. This ensures not only excellent precision, but also exceptional durability. Application 1. Scientific Research at the Highest Level In scientific research, especially in fields that require the utmost precision, such as nuclear physics or astrophysics, F2 class mass standards are indispensable. 2. Metrology Industry In metrology laboratories engaged in testing and maintaining the most advanced measurement standards, F2 class standards are indispensable working tools. 3. High-Precision Testing Laboratories In laboratories specializing in research requiring the highest precision, such as forensic laboratories and materials testing, F2 class mass standards are essential. 4. Aerospace Industry In the precision mass measurements required in the aerospace industry, F2 class standards provide reliability and excellence. F2 class mass standards are the symbol of the highest precision in the field of mass measurement. Their use is crucial in the most advanced fields of science, industry and research.

Motic Panthera C2 Binocular Compound Microscope Your Personal Lab Solution If it is about stained se (more)ctions with cover glass protection, about native smears, fine needle biopsies, blood smears that wanted to be treated with or without cover glass: Panthera C2 with its selection of specified optics is your solution. The new Ultra Contrast (UC) objectives with additional glass elements to reach a 22mm Field of View, working perfectly together with neutral eyepieces (thanks to CCIS a fully corrected intermediate image for digital access is granted) guarantee the best performance in terms of color fidelity and contrast. Microscope hardware, illumination, handling: Simply convincing. Functionality is Always Related to the Sample Bright Field is the standard, Phase Contrast, Pol Contrast, objectives with/without cover glass correction, optional LED Fluorescence modules with variable filter combinations: Within Panthera C2 module kit everything is possible for your lab, for your application. The microscope hardware suits to almost any physics of the user, no need to talk about interpupillary distance, viewing angle, or seating position. New UC Optics for New Insights No doubt. The new Plan UC Achromatic objectives, from 2X to 100X magnification range, show significantly improved image contrast. For your individual application: The new 100X/0.8 "Dry objective" is especially favorable in environments where the time-consuming immersion procedure may be considered too complicated. Test it, you are easily convinced. A Field of View of 22mm indicates one more step closer to the High-End level of overview: Your horizon will be enlarged. Flexibility in Illumination The Panthera C2 offers flexibility in light sources. A 30W Halogen bulb can be replaced by a 3W LED of different color temperatures. A Full-Koehler setup for transmitted light is self-evident. Seamless Integration into your Workflow For maximum use of accessories, the Panthera C2 is deeply integrated into Motic's Upright microscope system. The universal turret condenser with all Phase rings and a Darkfield stop, the combination of Polarizer/Analyzer for birefringent samples, LED Fluorescence modules for Epi-Fluorescence: design your workplace according to your demands. We will help you. Click Here to View Product Video INCLUDED: The Motic Panthera C2 Binocular Compound Microscope includes: - Widefield UC-WF10x/20 Eye Piece - 4X/0.10 (WD 30.5mm) Objective - 10X/0.25 (WD 17.4mm) Objective - 40X/0.65/S (WD 0.6mm) Objective - 100X/1.25/S-Oil (WD 0.16mm) Objective - Dust Cover - Power Cord - Allen Key - Immersion Oil (5ml) - Blue Filter - Halogen Bulb - LED Module - 5 Year Manufacturer's Warranty