Beckman Coulter MoFlo Astrios EQS Flow Cytometer System & Sterilgard Cabinet Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Lasers: Blue Solid State: 488 nm, 55 mW, Software Controlled Red Solid State Diode: 638 nm, 50 mW, S (more)oftware Controlled Violet Solid State: 405 nm, 80 mW, Software Controlled Configuration: Nominal 90 µm spatially separated beam spots Flow cell: 430 µm x 180 µm rectangular channel Collection optics: Fixed integrated optics and quartz flow cell design with a numerical aperture of > 1.2 Detector filters: Forward Scatter: 488/20 Blue Laser: 525/40, 575/30, 614/20 , 675/20, 695/30, 755LP Dyes: FITC, PE, ECD, PC5 or PEC5.5, PECy7 Red Laser: 660/20, 725/20, 755 LP Dyes: APC or Alexa Fluor 647, APC-Alexa Fluor 700, APC-Cy7, APC-Alexa Fluor 750 Violet Laser: 450/50, 550/40 Dyes: Pacific Blue, Krome Orange Forward Scatter Detector: Fourier design providing up to 3 measurements of forward angle Side Scatter Detector: High performance photodiode with electronic attenuation Fluorescence Detectors: FL1 – FL6 Fluorescent Detectors Flow rates: Continuous pressure is applied to the sample tube based on user selected flow rates: Low, Medium and High Performance: Carryover: < 0.1%, Dead volume as low as 2 µL when using Beckman Coulter 12 x 75 mm polypropylene tube and adjustable probe Acquisition modes: 32 tube Multi Carousel Loader (MCL), Single tube sampling mode, Automated work list acquisition, Manual work list mode Mixing: The MCL vortexes each tube individually before sample acquisition Barcode reading: Carousel number, tube location, and tube barcode verified to worklist Biosafety: Biohazard contained wash station thoroughly rinses sample probe Throughput: 10000 normal leukocytes is 82 tubes/hour Scatter resolution: Resolves 0.4 micron particles from background noise using Forward Scatter, Maximum detection of up to 40 microns Fluorescence sensitivity: FITC < 107 MESF, PE < 64 MESF, PC5 < 13 MESF Acquisition rate: 25000 events per second, 90% yield Cytometer dimensions (WxHxD): 950 x 610 x 730 mm Cytometer weight: 104 kg Supply cart dimensions (WxHxD): 724 x 298 x 495 mm Supply cart weight: 30 kg Software included but requires a new licence purchase.

Nanoentek ADAM-MC Automatic Cell Counter with Keypad This was removed from a university lab where it (more) was surplus to requirements. The unit powers up but we were unable to test ti further at our facility. It is in good cosmetic condition with minor marks.

This Millipore Guava EasyCyte 8HT Flow Cytometer was removed from a university lab where it was surp (more)lus to requirements. The system powers up and is in good cosmetic condition with only minor marks from use. The unit has been tested with samples but was showing readings of 200-300 when it should be showing readings of around 50000. We were unable to diagnose the exact fault. The unit has a Dell Optiplex 7010 PC paired with it. The PC includes a keyboard, mouse, monitor, USB and VGA Cable. It has had a brand new copy of 32bit Windows 7 installed. Guavasoft 3.1 has also been installed, which includes:ViaCount.InCyte (This requires an unlock code from Millipore to run).easyCheck.Guava Clean 3.1. We have been able to open and close the sample tray. This proves that the system is fully connected. It is sold for spares/repairs.

Climet CI-1054 100 LPM Particle Counter Lab This item was removed from a university where it was sur (more)plus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item also includes the following: Climet CI-S51 100 LPMKingston USB Porous media corporation Filter

Miltenyi Biotec CliniMACS Plus Cell Sorter Separator Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility. Serial No. 002421Manufactured June 2021

ZWIEBEL 5g calibration weight class M1 INOX Laboratory calibration weight in stainless steel Brand:  (more)ZWIEBEL Weight: 5 g Type / class: M1 maximum permissible error: ± 1.6mg LZ 67 Weight checked on a precision balance at 0.01g (10mg) - see photo In its plastic box uncalibrated weight

Address the full range of current and future multi-parameter cellular analysis research needs with t (more)he NovoCyte flow  ​cytometer. ACEA brings researchers high performance flow cytometry at a low investment cost with the NovoCyte platform. Lasers: Blue 488 nm, Red 640 nm Detectors: 530, 585, 675 nm Laser Configuration: Spatially separated beams with 10 x 80 μm elliptical spots Optical Alignment Procedure: Fixed, no operator alignment required Flow Cell: 170 x 290 μm rectangular quartz flow cell FSC/SSC Resolution: FSC < 0.5 μm, SSC < 0.2 μm Cell Size: 0.2 – 50 μm Fluorescence Threshold Sensitivity: FITC < 75 MESF, PE < 50 MESF Fluorescence Resolution: < 3% CV for CEN Filters: User Exchangeable Sample Acquisition Rate: 35,000 events/second Volumetric Absolute Count Precision: CV < 5% Sample Flow Rate: 5 – 120 μL/min Sheath Flow Rate: 6.5 mL/min Sample Aspiration Volume: 10 – 100 μL Fluid Container Capacity: 3 L sheath, 3 L waste, 500 mL cleaning, 500 mL decontamination Carryover: < 0.1% Fluidics Maintenance: Automated startup, cleaning, decontamination and shutdown Manual Sample Loading: 12 x 75 mm tube Dimension (WxDxH): 600 x 450 x 390 mm Weight: 39 k

PS Analytical Millennium System 10.055 This was removed from a university lab where it was surplus t (more)o requirements. The system powers up but has not been tested further. Both units power up and are in reasonable cosmetic condition with minor marks. Included are; 1 x PS Analytical Millennium System 10.055 1 x PSA 10.570 UV Cracker

VACUUBRAND ME 1C Chemistry Diaphragm Pump Ultimate Vacuum 100 mbar / 75 torr Maximum Pumping Speed 0 (more).5 CFM at 60Hz Number of Heads/Stages 1/1 Features - Convenient, quick and simple to use due to the new top-mounted power switch. - Whisper quiet and very low vibration. - Requires minimal benchtop space. - Maintenance-free drive system and proven long diaphragm life. - High chemical resistance. Vacuum filtration is one of the most common applications used for sample preparation in chemistry, microbiology, waste water control and other analytical processes. The ME 1C diaphragm pump offers a compact, high performance and easy-to-use solution which is perfect for single filtrations. This development, based on the highly successful technology of the oil-free diaphragm pump MD 1C, provides a well-proven and extraordinarily long diaphragm life time. The functional, space saving and innovative design with easily accessible, top-mounted power switch ensures convenient and quick operation for day-to-day lab work. Robust PTFE diaphragms and valves provide optimal chemical resistance. A manual vacuum regulator valve with dial gauge for adjustment of pumping speed and ultimate vacuum is available as accessory. One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors with a modest vacuum requirement. In contrast to water-jet pumps they do not consume water and therefore do not produce any contaminated waste water in daily use. Typical applications for the ME 1C are filtrations and solid phase extractions with solvents. At a process vacuum of 100 mbar, 90% of the atmospheric pressure is available as the driving force for the application. If a certain pressure difference must not be exceeded, the pump can be equipped with an optional manual vacuum regulator valve with dial gauge. It enables continuous adjustment of pumping speed and ultimate vacuum. INCLUDED: The VACUUBRAND ME 1C Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.