Thermo Scientific LTQ Orbitrap Velos with ETD Mass Spectrometer Lab Faulty NOTE - THIS IS A SPARES/REPAIRS ITEM

Waters Source Ion Guide A Part Number 700004952 This was removed from a university lab where it was  (more)surplus to requirements. The unit is boxed but not sealed. We are unsure if it has been used. It comes boxed with a Certificate of Conformity

Agilent 7500c ICP-MS G3155A Inductively Coupled Plasma Mass Spectrometer Lab This item was removed f (more)rom a university where it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

Micromass Waters Q-TOF Premier Mass Spectrometer This system was removed from a university lab where (more) it was surplus to requirements. The spectrometer is in excellent cosmetic condition, though the right-hand side panel is missing. It powers on, but the PC repeatedly displays a "VxLd 1.2" message during boot-up and does not progress further. The previous owner reported a failed HV board. Due to the failed HV board, this system is listed as Spares/Repair. The system includes the following: - Micromass Waters Q-TOF Premier Mass Spectrometer - Serial No.: HAA009 - Enlight PC - Serial No.: ECDG0406050406 - Dell Monitor - Serial No.: CN-ODC323-71618-64A-GNPO - HP Keyboard - Model No.: KB-0316 - Serial No.: BATHA0KVBZK - 1 x Spare spray source assembly (Code No.: M951593CC1, Serial No.: 33/015) - 1 x Spare spray source assembly with Watec W85BC camera (Serial No.: 63623) - 1 x Spare outer stage assembly

This system was removed from a university lab where it was surplus to requirements. All modules powe (more)r up but have not been tested further. We are told it was working prior to removal. 4 PCs are included, but have had their hard drives removed for GDPR reasons. The PCs have been left with he system as they may contain required Pci cards. It is in good cosmetic condition with minor marks. Sequenom Samsung MassARRAY NanodispenserSN - 31-0142-F2 Bruker Agena BioscienceType - MT AnalyzerSN - BA060636 Sequenom MatrixModel - PlateMate 2X2SN - 301-9-234Comes with Controller - Looks never used as is still sealed2 x Matrix ControlMate Software Discs V1.0.11 Other bits:-APC Back-UPS R S 1000 - Powers onSequenom Box of old chips for volume checksGrey Case for Matrix PlateMate Plus/PM 2X2 30ul 96 Pipetting Head (Case is empty)2 x 5000ml Simax Glass BottlesWash Tank with ProbeBDH Black Container2 x Nalgene Waste/Supply Containers40L Feed Tank with Probe40L Waste Tank with ProbeTubingSmall box labelled Gasket kit with 2 x Green Gaskets insidePfeiffer Vacuum Compact Cold Cathode Gauge PTR25500 (Not sure if this is related)Box labelled Sequenom Parts includes:-Shipping bracketPlatesPower cableMassARRAY Nanodispenser Floppy disk SN - B1-0142-F2Various PC cables (VGA etc.)

Waters Xevo TQ-S Mass Spectrometer w/ PC & Mass Lynx Software Lab This system was removed f (more)rom a university where it was surplus to requirement. All units are in good cosmetic condition and power up. The Waters Xevo pairs successfully with the Mass Lynx software. The password required for the PC is available on request. This system comprises the following: 1 x Waters Xevo TQ-S Mass SpectrometerS/N: WAA280 1 x Edwards Pump XDS100B Dry Vacuum PumpS/N: 119487143 1 x Edwards Pump XDS46i Dry Vacuum PumpS/N: 139464035 1 x Lenovo Thinkcentre PCS/N: S4DVW20 1 x Lenovo L 2250pwD MonitorS/N: V6-0DED6 1 x Kensington keyboard 1 x Microsoft Mouse 4 x Various connection cables 1 x Stainless steel pipe 2 x Pump hose pipes with aluminium fittings and various clamps

GC/MS Perkin Elmer that includes a GC Perkin Elmer Autosystem XL with FID, autosampler 82 positions  (more)and 2 injectors split/splitless, mass spectrometer detector Perkin Elmer Turbomass Upgrade single quadrupole and vacuum pump rotary Edwards RV3. Includes full PC, software-Turbomass 5.1 version, a library of compounds in the Nist and user manuals. Specifications: Large-volume injection. Controlled by a microprocessor. Able to accept a wide selection of capillary columns of phase states. Able to accept a series of detectors, universal and selective.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Print resolution: 203 dots/inch, 8 dots/mm or 300 dots/inch, 12 dots/mm Dot size (WxL): 203 dpi – 0. (more)110 x 0.132 mm, 300 dpi – 0.110 x 0.132 mm Maximum print width: 203 dpi – 108 mm, 300 dpi – 105.7 mm Bar code modulus: 203 dpi – 5 mil to 50 mil, 300 dpi – 3.3 mil to 33 mil Programmable constant print speeds: 51, 76, 102, 127 and 152 mm/s Media label length: Minimum (tear off) – 17.8 mm, Minimum (peel off) – 12.7 mm, Maximum – 991 mm Media label width: Minimum – 19 mm, Maximum – 114 mm Media total thickness (including liner, if any): Minimum – 0.076 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 76 mm core – 203 mm, 25 mm core – 152 mm Media inter label gap: Minimum – 2 mm, Preferred – 3 mm, Maximum – 4 mm Media ticket/tag notch size (WxL): 6 x 3 mm Media hole diameter: 3.18 mm Media notch or hole position (centered from inner media edge): Minimum – 3.8 mm, Maximum – 57 mm Media black mark density: > 1.0 ODU Media maximum density: ≤ 0.5 ODU Ribbon width: Minimum – 51 mm, Maximum – 110 mm Ribbon standard lengths: 2:1 media to ribbon roll ratio – 300 m Ribbon core inside diameter: 25 mm Dimensions (HxWxD): 277 x 242 x 432 mm Weight: 9.1 kg

The RADWAG Development Studio is a software intended for companies willing to develop their own tool (more)s for communication with RADWAG-manufactured weighing equipment. The purpose of RDS is to familiarize customers with solutions used while developing RADWAG communication protocol (Common Communication Protocol). The RDS contains examples of finished code and additional instructions which allow to simplify and accelerate development of new software. The RDS is all a programmer needs to design software that enables error-free communication with our equipment. Functiones: Presentation of functions (and subfunctions) of communication protocol (Common Communication Protocol) - information on which of the functions are available for balances, scales, weighing modules and terminals; Examples of fully-operational source code, ready to be applied in new applications using copy+paste method; Connection with weighing equipment on which each function is carried out - packets that are sent and received during operation are presented as text command, in hexadecimal form and in bytes; Library with mass control, contained within the development environment, is available for a programmer; Complete documentation of the communication protocol; Set of instructions regarding other solutions for programmers employed in companies using RADWAG-manufactured equipment; Available in English language version. *Technical support for an additional fee.

IKA KS 4000ic Incubator Shaker Type of Movement Orbital Temperature Setting Range 12°C - 80 °C Speed (more) Range 10 to 500 RPM Features - Large LED display for speed and time settings - Controls with antimicrobial coating for reduction of bacteria - Integrated PID temperature control (use of two PT 1000 temperature sensors) - Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60 - Electronic temperature and speed control - Electronic timer switch: 0 – 999 h (set by the minute or by the hour) - Optional built-in cooler for connection to an external cooling unit e.g. RC 2 basic / control - Unit switches off automatically if disturbed - Unit stops automatically when hood is lifted - Collecting tray with drain hose on rear of unit - Simple operation - All functions can be controlled and documented with labworldsoft - Attachments are not included in delivery, please order seperatly The IKA KS 4000ic Incubator Shaker combines precise control and user-friendly features, ideal for laboratory applications. It features a large LED display for speed and time settings, antimicrobial-coated controls, and integrated PID temperature control with dual PT 1000 sensors. The electronic timer switch allows settings from 0 to 999 hours, while the unit includes options for an external cooling connection. Safety mechanisms, such as automatic shutoff when disturbed or hood lifted, ensure reliable operation. With a permissible shaking weight of 20 kg, a speed range of 10-500 rpm, and a temperature range from 12°C to 80°C, this shaker provides optimal performance for your lab needs.

Eppendorf 5 x 50ml Centriprep & Falcon Skirted Flat-Bottom Tube Adapters, Cat. # 022638904 New i (more)n box Eppendorf 5 x 50ml Centriprep & 50ml Falcon Skirted Flat-Bottom Tube Adapters, Cat. # 022638904 for use with the A-4-81 rotor with the Eppendorf 5810/R Centrifuges. This is a two piece set, and the adapters are new in packaging.