Thermo Finnigan LCQ Deca XP Plus Mass Spectrometer Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

Applied Biosystems NanoSpray II  MDS SCIEX  Assy no. 1014665 This was removed from a univ (more)ersity lab where it was surplus to requirements. The unit is in good cosmetic condition but has not been tested. Applied Biosystems NanoSpray IIMDS SCIEXAssy no. 1014665SN - 0001042805

This Thermo Finnigan LCQ Deca XP Plus Mass Spectrometer was removed from a university lab where it w (more)as surplus to requirements. The unit is in good used cosmetic condition but it does have various marks and signs of general use. The main board and mains switch have now been removed and sold. Not all the cables/connectors etc were re-connected during re-assembly. The following other parts were also removed; - Power supply, Serial No: 9001305 008, Model No: SDS400-3628-1, SSI P/N: 20-0049-015N - Multifan 4394, GB-PAT: 2133082 2075288, ASSY by PAPST in Hungary   - Dynode FINNIGAN P/N: 97000-98042 REV-C  - Aux valve TYPE: DEMB3628028, S/N: 237085000104  - 5kV power supply 97000 10070C  - Ion Gauge   - LED front panel + 4 screws ASSY No: 97000-61400 REV-C  - Vent Delay PCB panel ASSY No: 97000-61370 REV-A It also comes with;1 x LCQ Hardware Manual.2 x Vacuum hoses with breeze hose clamps.Various other front assembly parts. This is sold for spares/repairs

This was removed from a university lab where it was surplus to requirements. The unit has not been t (more)ested. It is in good cosmetic condition with marks from use. Part no. 5-2437-00

This Varian MS System was removed from a university lab where it was surplus to requirements. The sy (more)stem is made up of; Varian IT Mass SpectrometerModel - 210-MSPowers on The lab informed us that the MS is faulty. It has a faulty transfer line heater. It is in reasonable cosmetic condition with marks from use. The grills on the fans have rusted, but the lab informed us that the rust was purely cosmetic and had nothing to do with the fault. The system is sold for spares/repairs.

Europa Scientific ANCA NT System & 20-20 Stable Isotope Analyser This was removed from a univer (more)sity lab where it was surplus to requirements. The system powers up but we were unable to test it further without the PC and software. The screen on the unit doesn't come on but we are advised that the little screens on the front of ANCA NT’s have never worked. They don’t affect the ability to use the instrument. Included are; 1 x Europa Scientific ANCA NT System 1 x Stable Isotope AnalyserModel - 20/20SN - 9007-072Powers on

Agilent / HP 1100 Series System With Spiderling Oven, 1100, Degasser, MSD This system was removed fr (more)om a university where it was surplus to requirement. All units are in good cosmetic condition and power on independently, we are unable to conduct further testing at our facility. The lab confirmed the system was working when last used in 2022. This system comprises the following: 1 x Spiderling oven -CS4000 1 x Agilent 1100 Automatic Liquid Sampler -G1313A 1 x HP 1100 Series Diode Array Detector -G1315A 1 x Agilent 1100 Pump -G1312A 1 x HP 1100 series Degasser -G1322A 1 x Agilent MSD -G1956B 1 x HP 1100 Series Solvent Tray-G1322A

Nikon Eclipse TE300 Inverted Fluorescence Microscope This item was removed from a university laborat (more)ory where it was surplus to requirements. It powers on using a power supply from a different item, but no power supply is included. Bulbs are in full working order. The item is in good cosmetic condition.As it is not a complete microscope, it is listed as Spares/Repair. The systems was professionally serviced and the following was discovered. • No evidence of salt corrosion detected.• DIC nosepiece present but objectives missing.• External power supply working & remote cable present.• Some damage to condenser lens (LWD 0.52) detected – not detrimental to image quality.• No phase or DIC modules present within condenser & no blanking plates fitted.• No fluorescence attachment or filter slider.• Focus spindle gear is cracked.• Some external shutters and filter wheels but incomplete.• Has an Orbit Monochromator controller – incomplete.• Missing stage plates.• Front photo port bung missing. Includes:- Nikon Condenser Turret Model#: Nikon LWD 0.52 - Nikon Binocular Head Serial#: 063482 No eyepieces or objectives are included. No bulb/light source is included. Model: TE300 TE-DH100WSerial No.: 413419

Flat polygonal sheets - set (1 mg - 500 mg) F1 class mass standards are exceptional measuring tools  (more)that represent the pinnacle of precision in the field of metrology. Classified as F1 metrology class, they are perfect for advanced applications where every detail of measurement is of paramount importance. F1 Class Mass Standards – Key Features Highest Precision and Accuracy - F1 class mass standards are characterized by absolute measurement precision and extraordinary accuracy. They are designed to meet the most stringent standards for acceptable deviation from actual weight. Stability under Difficult Conditions - An important feature of F1 class mass standards is their ability to maintain measurement stability even under harsh environmental conditions. The standards of this class are resistant to changes in temperature, humidity and other factors that affect the precision of measurements. Calibration in Accordance with International Standards - The calibration process for F1-class mass standards is rigorous and in accordance with international standards. This ensures that standards of this class are globally recognized and can be used in different countries. Specialized Construction Materials - F1-class standards are often made of materials with unique physical properties. This provides them not only with precision, but also with durability and wear resistance. The set includes: plastic box 12 mass standards 1 pair of tweezers 1 brush Material: nickel silver *The 1 mg, 2 mg and 5 mg mass standards are made of aluminum. Application 1. Industrial Metrology F1 class mass standards are used in metrology laboratories engaged in the testing and maintenance of measurement standards. 2. Scientific Research In scientific research, especially in high-precision fields such as physics and astronomy, F1-class mass standards are a key tool. 3. Aerospace Industry In the precision mass measurements required by the aerospace industry, F1-class standards guarantee reliability and accuracy. 4. Calibration Laboratories In calibration laboratories where uniformity and precision are a priority, F1-class mass standards are the standard of excellence. F1-class mass standards are synonymous with the highest quality and precision in the field of metrology. Their use is crucial where even the slightest deviation from the standard can carry unpleasant consequences. They are tools for advanced applications that contribute to raising standards in the field of mass measurement.

Stainless Steel Wire - set (1 mg - 500 mg) E2-class mass standards represent an exceptional standard (more) of precision in mass measurement. Classed as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. E2 class mass standards - key features High precision measurements - Class E2 mass standards must meet stringent measurement precision standards. The permissible deviations from the actual mass are strict, making this class of standards the ideal solution for applications requiring extreme accuracy. Stability over Time - An important feature of E2 class mass standards is their ability to maintain measurement stability over the long term. It is this stability that makes standards of this class highly valued in laboratories and industry. Calibration and Strict Quality Control - Systematic calibration is a key element in maintaining E2 class standards. This process involves comparing the mass standard with other standards of known mass to confirm and maintain measurement accuracy. Versatility of Applications - E2 class mass standards are designed for a wide variety of applications. They can be used in analytical laboratories, the pharmaceutical industry, scientific research or other areas requiring precise mass measurements. The set includes: plastic box 12 mass standards 1 pair of tweezers 1 brush Material: stainless steel Zastosowanie 1. Analytical Laboratories In analytical laboratories, where precise and repeatable measurements are crucial, E2 class mass standards find their wide application. 2. Pharma Industry In drug manufacturing, where quality control plays a key role, E2 class mass standards are indispensable in the calibration process of balances. 3. Scientific Research In scientific research, especially in areas requiring the utmost precision, E2 class mass standards are an indispensable tool for obtaining reliable results. 4. Metrology Industry In metrology laboratories, E2 class standards provide a reference point for evaluating and testing other measurement standards. E2 class standards are synonymous with excellence in mass measurement. Their versatility and high precision make them an indispensable tool in laboratories around the world and improve the quality and reliability of mass measurement results.

Scilogex MicroPette Plus Autoclavable Pipettor, 0.5-10ul Volume Range 0.5-10uL Adjustable or Fixed V (more)olume Adjustable Volume Accuracy (±%) 1.00/1.50/2.50 Features - Fully autoclavable at 121°C - Ergonomic design provides excellent operating experience - Easy-to-read volume display - The pipettes cover the volume range from 0.1μL to 10mL - Integral tip ejector for access into narrow tubes - Easy to calibrate and maintain with tool supplied - Used with 'universal' pipette tips - Each MicroPette Plus supplied with an individual calibration certificate according to ISO8655. The MicroPette Plus pipettes are fully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function. All SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C. Volume adjustment is selected by turning the thumb plunger mechanism. MicroPette's are calibrated in accordance ISO/DIS 8655. Each pipettor passes a quality control/calibration test and is supplied with a certificate. INCLUDED: The Scilogex MicroPette Plus Autoclavable Pipettor, 0.5-10ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty