Micromass Quattro LC Triple Quad Mass Spectrometer System & Gilson Modules Lab

Sequenom Agena MassARRAY Analyzer 4 System RS1000, PHX-1 & Accessories This was removed from a  (more)university lab where it was surplus to requirements. The system powers up and everything communicates but we were unable to test it further at our facility. The touchscreen on the nanodispense does not work, but we have replaced it with a monitor, mouse and keyboard. There is also a complete peripheral setup provided for the inbuilt PC in the PHX-1 system. Included in the system are; Sequenom Agena MassARRAY Analyzer 4 PHX-1Model: PHX-1Serial#: PX10060104 Sequenom Agena MassARRAY Nanodispenser RS1000Model: RS1000Serial#: 10P0413RS-01 The system also includes the following: Windows XP Software DiscNI Vision Deployment Engine for One UserMassARRAY Nanodispenser RS-1000 User's Guide v1.2.1WebPAM Software DiscFastTrak TX2300/TX4300 Quick Start GuideVarious Replacement parts (shown at end of slide)Various Plates for plate reader.

DigiLab Pro Prep II Protein Digestion & Mass Spec Preparation Station 2   This was removed  (more)from a university lab where it was surplus to requirements. At our facility we were only able to power it up, but we are told it was in full working order prior to removal. The only issues is that the gas struts have failed. It is in excellent cosmetic condition with hardly any marks from use. There are various accessories included.

Waters Trap TriWave 289002940 M95B2227C1 T-Wave Mass Spectrometry Device This was removed from a uni (more)versity lab where it was surplus to requirements. The item is in good cosmetic condition but there are marks from prior use. The item is untested.

The Thermo Finnigan LCQ Mass Spectrometer System is a powerful and compact benchtop mass spectromete (more)r for LC/MS/MS. The Finnigan LCQ, equipped with Xcalibur software, permits in-line acquisition and integration of HPLC dual-wavelength absorbance data along with mass spectral data. WideBand ActivationTM a standard feature on the Finnigan LCQ-DUO applies resonance excitation energy that fragments the molecular ion and any product ion up to 20 amu less than the precursor ion. This is important because hydroxylated compounds frequently only show the loss of a water molecule in an MS/MS spectrum giving little structural information. Wideband Activation provides spectra with greater structural information and is invaluable for MS/MS library building, high-throughput screening and quantization experiments. Specifications include: AC Input: V 230, Hz 50/60, A 10.0 Max     Mech. Pump: V 230, Hz 50/60, A 5.0 Max     Model: LCQ

Innovative MALDI-TOF and TOF/TOF technology designed and optimized to be easy-to-use; robust systems (more) for both traditional MALDI applications (reliable and detailed protein/peptide characterization, and polymer analysis) as well as cutting edge work (high resolution MALDI Tissue Imaging, glycan analysis or high-throughput MALDI Biotyper microbial identification). The new autoflex speed incorporates a number of key features which enhance its capabilities and value including: Enhanced Speed with a 2 kHz (kiloHertz) proprietary smartbeam-II solid-state laser and electronics for high throughput applications including LC-MALDI, MALDI Imaging, and high-throughput microbiology ID Unique FAST-SRM mode provides single reaction monitoring capabilities for imaging of drugs and metabolites in tissue Expanded High-Resolution Mass Range for analysis of polymers and Top-Down, intact protein sequencing for long sequence readouts FlashDetector technology to increase resolution and prevent signal saturation for complex samples Self-cleaning Ion Source cleans the instrument source in minutes to improve system up-time and with minimal operator maintenance Optimized Software packages for numerous applications e.g. Protein-, Peptide-, Polymer-Analyses, and MALDI Imaging, clinical research methods and the MALDI Biotyper IVD-CE workflow. The most flexible autoflex instruments are available in linear only mode, high resolution reflectron mode and the latest TOF/TOF technology (LIFT) which enables the use of various MS/MS techniques (e.g. LID, high energy CID) for fast and sensitive MS/MS experiments. Including PC and several sample plates

GC/MS Perkin Elmer that includes a GC Perkin Elmer Autosystem XL with FID, autosampler 82 positions  (more)and 2 injectors split/splitless, mass spectrometer detector Perkin Elmer Turbomass Upgrade single quadrupole and vacuum pump rotary Edwards RV3. Includes full PC, software-Turbomass 5.1 version, a library of compounds in the Nist and user manuals. Specifications: Large-volume injection. Controlled by a microprocessor. Able to accept a wide selection of capillary columns of phase states. Able to accept a series of detectors, universal and selective.

This listing is for 1 of 3 Roche LightCycler II Thermal Cycler

IKA DB 5.2 Vial Dry Block (15 mm)

This item has just arrived in our stock. Please enquire for further details.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Thermo Scientific Model:  Multifuge X3 FR Refrigerated Centrifuge           with TX-75 (more)0 Rotor with Round Buckets(4x Adapter: 2x 14x15ml / 2x 5x50ml Conical Tube) S/N: 41099204 P/N: 75004536 Description: Minimized footprints, maximized ergonomics - Floor models conserve valuable bench space, and have a footprint that is 24% smaller than the footprint of refrigerated benchtop models* - Low working height of 79 cm provides outstanding ergonomics when removing tubes and exchanging rotors - Fully portable with secure lockable castors— ideal for moving around the lab and easy cleaning, helping to prevent contamination Recommended for: cell culture, microplate, bioproduction, food safety, blood separation, bodily fluid processing, pharmaceutical, biotechnology, stem cell, microbiology, molecular biology, proteomics,and genomics applications Key Features: • SmartSpin technology optimizes acceleration and identifies unbalanced loads • Push-button exchange of rotors • ClickSeal bucket sealing system eliminates the need for screw caps or clips Specifications Multifuge X3 FR Floo Standing Refrigerated Centrifuge: Performance Swinging Bucket Rotors Maximum Capacity: 4 x 1000 ml (with TX-750 and BIOLiner rotors) Maximum Speed: 6000 rpm (with BIOShield 1000A rotor) Maximum RCF: 7164 x g (with BIOShield 1000A rotor) Performance Fixed Angle Rotors Maximum Capacity: 6 x 250 mL (with F14-6 x 250LE rotor) Maximum Speed: 15200 rpm (with 48x2 ml rotor) Maximum RCF: 25314 x g (with 48x2 ml rotor) Control system: microprocessor Drive system: direct, brushless induction low profile motor Rotor Locking System: Auto-Lock III Imbalance Detection System: SMARTSpin Programs: 99 (5 with direct access key) Temperature Set Range: -10 °C to +40 °C Maximum Timer Range: 99h, 59min + continuous Other Features: ClickSeal biocontainment system, language selection, motorized lid latch Max. power consumption: 1950 W Mains supply: 230 V Dimensions wit Lid closed (HxWxD): 84 x 56,5 x 67 cm Weight: 142,5 kg Specifications TX-750 Rotor: Part No.: 75003180 Rotor Capacity: 4 x 750 mL Max Speed: 4700 rpm RCF: 4816 x g Angle: 90° inclusive 4x Round Buckets (P/N:75003608) and 2x 14x15ml Conical Tube (P/N:75003639), 2x 5x50ml Conical Tube (P/N:75003638) Items delivered: - Thermo Scientific Multifuge X3 FR Floor Standing Refrigerated Centrifuge - Power Cord - TX-750 Rotor with Roundbuckets and Adapters - Instruction Manual as PDF via E-Mail The centrifuge is in perfect cosmetic as well as technical condition. - 100% functional tested (runs smooth and quiet).