Hitachi U-5100 UV/Visible Spectrometer 200..950 nm Six Cell Changer Spektrometer

Micromass Waters Q-TOF Premier Mass Spectrometer This system was removed from a university lab where (more) it was surplus to requirements. The spectrometer is in excellent cosmetic condition, though the right-hand side panel is missing. It powers on, but the PC repeatedly displays a "VxLd 1.2" message during boot-up and does not progress further. The previous owner reported a failed HV board. Due to the failed HV board, this system is listed as Spares/Repair. The system includes the following: - Micromass Waters Q-TOF Premier Mass Spectrometer - Serial No.: HAA009 - Enlight PC - Serial No.: ECDG0406050406 - Dell Monitor - Serial No.: CN-ODC323-71618-64A-GNPO - HP Keyboard - Model No.: KB-0316 - Serial No.: BATHA0KVBZK - 1 x Spare spray source assembly (Code No.: M951593CC1, Serial No.: 33/015) - 1 x Spare spray source assembly with Watec W85BC camera (Serial No.: 63623) - 1 x Spare outer stage assembly

Bruker MicrOTOF II Time-Of-Flight Mass Spectrometer This item was removed from a university laborato (more)ry where it was surplus to requirements. The spectrometer powers on and is in good cosmetic condition, with a few very small marks on the outer casing. A loss of MS signal was reported to Bruker in August 2022. After replacing the glass capillary, the issue was temporarily resolved but re-occurred in October 2022. Bruker advised replacing the MS source door and the roughing pump. Due to the required MS source door and roughing pump, this system is not functional and is listed as Spares/Repair. Includes: - 1 x new Bruker 8236619 maintenance kit (air filter, hydrocarbon trap, oil backing pump oil, exhaust filter cartridge, and filter mat) - 4 x data cables - 4 x U-bend stainless steel 1/2" pipes - 1 x air 90˚ elbow connector 1" Serial No.: 823175010435

The LC-NMR-MS Interface is designed to sit between an HPLC system, an NMR spectroscopy probehead and (more) an MS unit. It would normally be mounted on top of the MS table immediately in front of the MS input connector. The BNMI-HP consists of 3 medium pressure (> 60Bar) syringe pumps, a 1:20 splitter, an 8-Port valve, 3 mixing chambers (T-Pieces) and associated control and interface electronics. The flow of the HPLC separations to the MS unit can be modified by pumping additional solvent from the syringe pumps. This improves the MS peak detection and shortens the time needed for the split separation to reach the MS. Separations can also be stored as a result of an MS peak detection as well as through UV absorption peak detection. The splitter splits the fluid flow from the HPLC in a 1:20 ratio. i.e. ca. 5% of the fluid is directed to the MS and the remainder to either the NMR probehead for immediate analysis or to the BPSU36 storage cassette for storage and later analysis.  The fluid directed to the MS is mixed in the mixing chamber (T-Piece) with the solvent pumped from the syringe pumps. The two left hand syringe pumps pump alternatively to guarantee a constant ’makeup’ flow. The 3rd pump at the right hand side is used to pump a calibration fluid into the flow path to allow the MS to be calibrated (or simply synchronized) at the start and end of each measurement cycle. The 8-Port valve is used to direct the fluid flow. Control of the BNMI Unit is performed using the HyStar program via an ethernet interface. Commands received from HyStar are interpreted in the BNMI Control Board. The control board then sets up the BNMI unit accordingly e.g.: Starts the pumps, changes the flow rate, turns the 8-Port valve. The splitter has a fixed mechanical function and cannot be controlled or adjusted. It simply accepts a fluid flow and splits it into 2 paths in a 1:20 ratio. However, other split ratios are available (for example 1:100 may be preferred if you have very high sample concentrations).

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Varioshake shakers The silent LAUDA shakers are available in a large number of variations and shake  (more)each sample evenly, such as 15ml and 50ml tubes, Erlenmeyer flasks and containers. They can be used for a large number of purposes, thanks to a wide range of accessories. Areas of application: - Biology and microbiology - Medical diagnostics - Analytical laboratories - Test institutes, universities and research facilities - Quality Assurance Laboratories Reliable and durable with new LAUDA design The shakers are the laboratory's trusty 'workhorse'. LAUDA agitators are produced with 'GFL technology' and are synonymous with the highest quality, reliability and durability. Their robust, low-wear mechanical system ensures extremely smooth operation and reliable continuous service. Furthermore, thanks to the new LAUDA design, the shakers adapt to any laboratory environment, thanks to their small footprint and are extremely easy to use. Control panel: analog or digital The LAUDA Varioshake VS 8 OE and BE, with analog rotary controllers, allow adjustment of speed and operating time. Digitally controlled agitators provide an extended timer range, start / stop function and provide the ability to save the latest operating parameters. Shaker tray, test tube holder, Erlenmeyer flask clamp easy to install in seconds. All available as an accessory. Turn on, set the shaking frequency, set the running time, done. Highest quality materials: daily use for years without problems.

Nikon MP-NI-R Microscope Stage This item was removed from a university where it was surplus to requi (more)rement. It is in very good cosmetic condition, we are unable to test it at our facility.

IKA KS 3000i Incubator Shaker Type of Movement Orbital Temperature Setting Range Room Temp. +5° - 80 (more) °C Speed Range 10 to 500 RPM Features - Large LED display for speed and time settings - Controls with antimicrobial coating for reduction of bacteria - Integrated PID temperature control (use of two PT 1000 temperature sensors) - Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60 - Electronic temperature and speed control - Electronic timer switch: 0 – 999 h (set by the minute or by the hour) - Optional built-in cooler for connection to an external cooling unit e.g. RC 2 basic / control - Unit switches off automatically if disturbed - Unit stops automatically when hood is lifted - Collecting tray with drain hose on rear of unit - Simple operation - All functions can be controlled and documented with labworldsoft - Attachments are not included in delivery, please order separately This innovative incubator shaker enables unattended operation in a precisely controlled environment, featuring orbital movement with a 20 mm shaking stroke and a maximum permissible shaking weight of 7.5 kg. It offers a speed range of 10 to 500 rpm, displayed on an LED screen, and controlled in 1 RPM steps. The unit includes a 7-segment LED timer, adjustable from 1 second to 59940 minutes, and operates in both timer and continuous modes. With a heating range from room temperature +5°C to 80°C and a 50-liter inner chamber, this shaker ensures precise temperature control and stability, ideal for various laboratory applications.

VACUUBRAND PC 3001 VARIO Select TE, With Dry Ice Condenser Ultimate Vacuum 2.0 mbar (1.5 Torr) Maxi (more)mum Pumping Speed 1.18 CFM at 60Hz Number of Heads/Stages 4/3 Features - Dry ice condenser at the pump exhaus, no cooling water connection required - Simplify lab work with the VACUU·SELECT vacuum controller with graphic user interface and predefined applications - Automatic boiling point detection and continuous optimization of vacuum levels for quick process times, whisper quiet and ultra low vibration - Compact and powerful; superior performance even with continuous condensate purge - Eco-friendly: extremely low power consumption and efficient solvent recovery. Oil-free! The PC 3001 VARIO select pumping unit precisely controls the vacuum level in order to achieve unparalleled process control. This pump is suitable for even high boiling point solvents. The integrated VACUU·SELECT controller provides an easy-to-use, application based interface that covers all common lab applications. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the VACUU·SELECT controller detects solvent boiling and automatically adjusts the pump's motor speed to maintain process control. The VARIO motor speed control also makes the pump whisper quiet and provides for exceptionally long maintenance intervals. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage and extending pump life. The PC 3001 VARIO select TE is equiped with a dry ice condenser at the pump exhaust, so that no cooling water connection is required.INCLUDED: The VACUUBRAND PC 3001 VARIO Select TE, With Dry Ice Condenser includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

BrandTech Scientific Transferpette-12 Electronic Multichannel Pipette, 1 to 20ul Volume Range 1 to 2 (more)0 ul Accuracy 1.0% / 0.20 ul at 20 ul Pipette Type Air Displacement Features - Ergonomic design with adjustable finger rest for comfortable, fatigue-free pipetting - Multiple operating modes: standard pipetting, reverse pipetting, mixing, gel loading, and dispensing - Intuitive four-button control system with a clear digital display for easy operation - 360° rotating pipetting unit for customizable hand positioning and improved comfort - Easy Calibration technology enables quick, tool-free adjustment for maintaining accuracy - Autoclavable pipette shaft for convenient sterilization and contamination prevention - Effortless tip mounting and ejection with minimal force required due to O-ring design - Long-lasting NiMH battery supports over 4,000 pipetting cycles per charge - Continuous use during charging with a 1-meter charging cable - Battery Refresh function extends battery life and optimizes performance The BrandTech Scientific Transferpette-12 Electronic Multichannel Pipette, 1 to 20ul is designed to optimize efficiency and accuracy for laboratories performing high-throughput liquid handling tasks. With 12 channels and a precise volume range of 1 to 20ul, this pipette is perfect for applications requiring low-volume precision. Its ergonomic design and adjustable finger rest ensure comfort during extended use, while the 360-degree rotating pipetting unit offers versatility for left- or right-handed users. This advanced multichannel pipette supports partial volumes of 20ul, 10ul, and 2ul, achieving an accuracy of 1.0% at 20ul and a coefficient of variation as low as 0.5%. Featuring intuitive controls, multiple operational modes, and Easy Calibration technology for quick adjustments, the BrandTech Scientific Transferpette-12 Electronic Multichannel Pipette, 1 to 20ul delivers reliable performance and enhances workflow efficiency in demanding laboratory environments.Click Here to View Product Video INCLUDED: The BrandTech Scientific Transferpette-12 Electronic Multichannel Pipette, 1 to 20ul includes: - 1 x TipBox - 1 x TipRack Refill Pack - Device Stand - Rechargeable Battery - Power Adapter - Reagent Reservoir - Assembly Aid - Grease - 1 Set of Sealing Rings - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty