Bruker MicrOTOF Q MicrOTOF-Q Time-of-Flight Mass Spectrometer Lab

Thermo Scientific LTQ Orbitrap XL Hybrid Ion Mass Spec System This system was removed from a univers (more)ity where it was surplus to requirement. It is in reasonably good cosmetic condition and powered on with the pump operable. The previous owner has stated that the PC & hard drive has been removed as they had stopped working, but they reported no faults with the MS itself. It powers up but has not been tested further. Also included with the listing is the following; 1 x Thermo Scientific Gas Specific Triple Filter Helium2 x LTQ Orbitrap Biotech Operations Training Course Manual Various other unidentifiable parts - photos included.

Thermo Finnigan LCQ Advantage Mass Spectrometer Surveyor LC-MS System This was removed from a univer (more)sity lab where it was surplus to requirements. The lab confirmed that everything was in working order prior to removal. We have powered up everything but were unable to test further at our facility. All the units are in good cosmetic condition with minor marks. Included are; 1 x Thermo Finnigan LCQ Advantage Mass Spectrometer SystemSerial No. LAD00300 1 x Surveyor PDA DetectorPart No. SRVYR-PDA5Serial No. 56866 1 x Surveyor AutosamplerPart No. SRVYR-ASSerial No. 77269 1 x Surveyor MS PumpPart No. SRVYR-LPUMPSerial No. 62615 1 x Edwards 28 Vacuum PumpModel E2M28Serial No. 170517841 Supplied with:1 x Xcalibur LCQ Advantage Revision 1.3.1 x Xcalibur LCQ Advantage/DecaXP Revision 1.3 SP1.1 x Xcalibur Core Data System Software Revision 1.3.1 x Thermo MSQ 2.0 SP2 Instrument Control.1 x Thermo Xcalibur 2.1 W/Foundation 1.0.2 Rev.B.1 x Thermo Xcalibur LC Devices 2.4.0.2 x Thermo Xcalibur LC Devices 2.3.0 Software.1 x Thermo TSQ Series 2.1.1.1 x Thermo SurveyorPlus Manual Set.1 x Thermo Part No. 23043457 Start cable Integrator/Gtrace.1 x Thermo Part No. 23038071 Recorder Cable L=1900mm.1 x Emerson Industrial Automation Leroy-Somer Engine;2 x Spark Generators;1 x PULNIX 20mm CCD Camera;5 x Cables;3 x Spacer 7.7x3.2;1 x Spacer 6.3x3.2;2 x ThermoFisher Scientific Tubing Fused SI 150Ux390U;2 x Storer: TFS;1 x ThermoFisher Scientific Insulator Heater APCI;1 x O-Ring;1 x Plunger.

Perkin Elmer Clarus 500 Mass Spectrometer This item was removed from a university where it was surpl (more)us to requirement. It is in good cosmetic condition and powers on. When powered on to test, the item began to emit an unpleasant odour. It is listed as Spares/Repairs.

Thermo Scientific Surveyor MSQ Plus Mass Spectrometer System This item was removed from a university (more) where it was surplus to requirements. The system is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility. Additionally, the client has reported that all hardware is functioning correctly. Included Components: - APCI Probe - 2 x Bottles - 20 x Thermo Corona APCI Needles Specifications: - Model: Surveyor MSQ - Serial No.: MSQ21121

HX7 HR scale’s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7” colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The RB 2.5Y.F filter robot is a professional-class measuring device ensuring full automation of filt (more)er mass measurement. The robot is based on MYA 5Y microbalance mechanism that guarantees unrivalled repeatability and redability of d= 1 µg. The device enables weighing up to 1020 filters with 47 mm diameter. The device is enclosed in a tight and dustproof chamber protecting it against any contamination. The air conditioning and humidification system ensures stable and fixed ambient conditions inside the chamber, which guarantees correct filters conditioning. Ambient conditions monitoring allows control of current chamber status and report of data. Advantages: Fully automatic system for weighing filters with Ø 47 mm Compliance with EN 12341:2014 standard Conditioning and weighing of up to 1020 filters Additional reference magazine Less time consumed when compared to manual filter weighing Elimination of human factor as the reason of measurement errors Process management using RMCS Filter software Automatic data recording, creating reports and statistics Coding and identification of filters using QR code system Elimination of the influence of electrostatics onto the measurement Hermetic robot chamber and the chamber for filter weighing Air conditioning system, HEPA filter (version without air conditioning on request) Increased pressure in the chamber prevents contamination The RB 2.5Y.F filter robot comprises: Two magazines for filter storage and weighing. Each magazine consists of 34 discs with 15 filter positions. A six-position reference magazine for storing mass standards and reference filters. A robot with a gripper enabling transport of the filters between the magazine and the microbalance, the robot moves on three axes: X,Y,Z; Microbalance with a draft shield; Ionizing system; An air conditioning system with HEPA filter for cleaning the air in the vicinity of the robot chamber; Ambient conditions monitoring (temperature, humidity, pressure); Weighing indicator for managing of the device operation; QR code reader integrated with the device; QR code printers; A PC with the RMCS Filters software for managing the device operation; Control and adjustment system; An external air conditioning unit.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Thermo Scientific Multiskan FC microplate reader. The wavelength range is 340 to 850 nm, which allow (more)s a variety of applications from enzymatic kinetic studies to Lowry assays. Accuracy ± 1% for 0.3–3 Abs at 405 nm, ± 2% for 3–4 Abs at 405 nm. Eight-position filter turret with three standard filters (405, 450 and 620 nm) pre-installed. Slow, medium or fast linear agitation. Fast processing reading in 6 seconds. Automatic calibration and self-diagnosis. Quick access to the most used protocols. The internal software contains qualitative and quantitative calculations for simple, dual and kinetic measurements. USB interface User manual. Specifications