Perkin Elmer The Protome Works System Mass PREP Station Robotic Protein Handling System

Europa Scientific ANCA NT System & 20-20 Stable Isotope Analyser This was removed from a univer (more)sity lab where it was surplus to requirements. The system powers up but we were unable to test it further without the PC and software. The screen on the unit doesn't come on but we are advised that the little screens on the front of ANCA NT’s have never worked. They don’t affect the ability to use the instrument. Included are; 1 x Europa Scientific ANCA NT System 1 x Stable Isotope AnalyserModel - 20/20SN - 9007-072Powers on

Bruker  MicrOTOF-Q ll Mass Spectrometer This was removed from a university lab where it was sur (more)plus to requirements. This Bruker Spectrometer is for spares or repairs. The previous owner has had an engineer report that states a new turbo pump, communications board for the pump and other PCBs are required. It is in excellent cosmetic condition with only minor marks but is sold for spares/repairs. Model QT 0201 G 003Serial No. 228888.10222Year 2009 The unit powered on with the cooling fan operational and a red light showing on the STATUS indicator.No other testing carried out.

This Micromass LCT TOF Mass Spectrometer was removed from a university lab where it was surplus to r (more)equirements. The unit powers up and is in good cosmetic condition with minor marks. The lab reported that it was for spares or repairs but the fault is unknown. When we collected it, all the panels were removed, but we have fixed them back on. Edwards parts fitted:-SP25K N 9 Bar (SN-0171836682)FL20K Foreline Trap (PN-A13305000/SN-165003057)EXDC80 (PN-D39640000) It is sold for spares/repairs.

Finnigan Mat Circuit Boards P/N 2036700 S- 2036720 S- These were removed from a Thermo Finnigan MAT  (more)system. Included are; 4x Finnigan Mat Circuit boards Part no's. •2036700 S- •2036720 S-

Bruker MicrOTOF II Time-Of-Flight Mass Spectrometer This item was removed from a university laborato (more)ry where it was surplus to requirements. The spectrometer powers on and is in good cosmetic condition, with a few very small marks on the outer casing. A loss of MS signal was reported to Bruker in August 2022. After replacing the glass capillary, the issue was temporarily resolved but re-occurred in October 2022. Bruker advised replacing the MS source door and the roughing pump. Due to the required MS source door and roughing pump, this system is not functional and is listed as Spares/Repair. Includes: - 1 x new Bruker 8236619 maintenance kit (air filter, hydrocarbon trap, oil backing pump oil, exhaust filter cartridge, and filter mat) - 4 x data cables - 4 x U-bend stainless steel 1/2" pipes - 1 x air 90˚ elbow connector 1" Serial No.: 823175010435

Heidolph Coated Glassware Set G3B XLVertical condenser for all standard distillations; formaximum ev (more)aporation performance. The new XL condenser with industry-leading condensing surface of 2,200 cm² - achieve up to 40 % higher evaporation rates. - With transparent plastic coating - suitable for atemperature range up to max. 80 ° C - Glassware set includes one 1,000-ml evaporating flaskand one 1,000-ml receiving flask - Evaporating flasks and vapor tubes which come with astandard NS 29/32 joint size are also available with NS 24/29 groundjoints - Ventilation cap without ground joints for easy handling andgrease-free operation included - A venting valve with refill function is optionally available - Suitable for the automated distillation program Dynamic AUTOaccurate onHei-VAP Expert / Ultimate Control models - Also available upon request: glassware sets for Soxhletextraction and descending condenser system INCLUDED: The Heidolph Coated Glassware Set G3B XL includes: - G3B XL Vertical Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Ventilation Cap - Full 3 Year Manufacturer's Warranty

A&D Weighing Apollo GF-324A Analytical Balance, 320 g, 0.1 mg Capacity 320 g Readability 0.0001 (more) g Repeatability 0.0002 g (300 g); 0.0001 g (200 g) Features - Increased productivity via faster stabilization times including 1 second fast mode with Smart SHS - Impact-Alert visually & audible indicates the magnitudes of impact shocks - Shock-log documents date, time, and shock level - Flow rate display streamlines & improves filling or dosing precision - FR-Cal calculates, displays/outputs the mass or volume flow rate by entering density - FR-Compare is a comparator which provides feedback if the flow rate is within limits - FR-Secure stores tare values in our non-volatile memory if application was disrupted - External Calibration easy one touch button performs & document external calibration - Universal Flexi Coms (UFC) edit serial data output making label printing possible - Password-Protect offers password-protection up to 11 users and 1 administrator - Large, easy-to-see, front mounted spirit level with LED Illumination - Fly-thumbwheel is effortless & accessible allows ergonomic adjustment with anti-slip feet - Six straightforward keys – ON/OFF, CAL, MODE, SAMPLE, PRINT, REZERO to simplify operation across users - Weighing pan and dust plate can be easily removed for cleaning - Toggle between the Quick USB mode or Virtual COM mode (bi-directional) The A&D Weighing Apollo GF-324A Analytical Balance, 320 g, 0.1 mg, with a capacity of 320 g and a readability of 0.0001 g, delivers high precision in a robust package, ensuring accurate measurements for various laboratory applications. This balance features external calibration with an easy one-touch button that not only performs but also documents calibration, ensuring consistent performance and compliance with lab standards. Its fast stabilization time of approximately 2.0 seconds, or 1.0 seconds with fast mode enabled by Smart SHS® Weighing Technology, significantly enhances productivity, especially in fast-paced environments. Designed for versatility and user-friendliness, the GF-324A incorporates features like Impact-Alert, which visually and audibly indicates the magnitudes of impact shocks, and a Shock-log that documents the date, time, and level of shocks, protecting the integrity of your results. Additional advanced functionalities include a Flow Rate Display (FRD) that streamlines and improves the precision of filling or dosing tasks. The FR-Cal function calculates and displays outputs for the mass or volume flow rate by entering density, while FR-Compare provides feedback if the flow rate is within set limits. FR-Secure ensures that tare values are stored in non-volatile memory to prevent data loss during disruptions. Operational simplicity is achieved through its user-friendly interface featuring six straightforward keys—ON/OFF, CAL, MODE, SAMPLE, PRINT, REZERO—and a large, front-mounted spirit level with LED illumination for easy leveling. The balance's flexible communication capabilities, including RS-232C and USB interfaces, support seamless data management. All these features are housed in a design that allows for easy cleaning and maintenance of the weighing pan and dust plate. The A&D Weighing Apollo GF-324A Analytical Balance is backed by a 5-year warranty, assuring long-term reliability and support. INCLUDED: The A&D Weighing Apollo GF-324A Analytical Balance, 320 g, 0.1 mg includes: - External Key Jack - Large Glass Breeze Break - Breeze Break Ring - Weighing Pan - Bubble Spirit Level - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

MARSHALL Select MS-OT20LE Overhead Stirrer, 20L Maximum Stirring Quantity 20L Speed Range 50 to 2,2 (more)00 RPM Maximum Viscosity 100,000 mPas Features - High torque of 40 Ncm suitable for viscous medium stirring - Brushless DC motor ensures long life, maintenance-free operation, and safety in explosive environments - LED display for precise monitoring of actual speed - Over torque protection and safety circuits provide safe stop functions in anti-stall or overload conditions - Large chuck diameter supports many shaft types, increasing versatility - Through-shaft design allows for easy adjustment of the impeller position - Automatic resumption of stirring at preset speed after power loss - IP21 protection class offers basic protection against solid objects and dripping water - Analog speed controls displayed on the LED for easy adjustments and monitoring - Designed to accept pass-through stirrer rods for flexible setup options - Visual alarm alerts for immediate notification of system issues or malfunctions - Explosion-proof motor enhances safety in volatile environments The MARSHALL Select MS-OT20LE Overhead Stirrer stands out for its high reliability and superior performance, engineered to manage stirring tasks up to 20L. It features a versatile speed range from 50 to 2,200 RPM, suited for a wide variety of laboratory needs. This stirrer is equipped with a brushless DC motor, renowned for its long life, maintenance-free operation, and explosion-proof qualities. The MS-OT20LE includes an LED screen that displays the actual speed, ensuring precise control over your mixing processes. It's capable of handling high viscosities up to 100,000 mPas with a maximum torque of 40 Ncm, making it ideal for stirring viscous mediums. The large chuck diameter supports many shaft types, enhancing its adaptability. Safety is a paramount feature of this device, with integrated circuits that provide a safe stop function in conditions of anti-stall or overload, where over torque protection automatically stops the motor. Additionally, the through-shaft design allows for easy adjustment of the impeller position to suit varying laboratory needs. In the event of a power outage, the stirrer automatically resumes operation at the preset speed once power is restored, ensuring continuity and efficiency. The IP21 protection class provides basic protection against solid objects and dripping water, further securing the unit in active laboratory environments. INCLUDED: The MARSHALL Select MS-OT20LE Overhead Stirrer, 20L includes: - Key of Drill Chuck - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

BrandTech Scientific Transferpette S-8 Multichannel M8-10, 0.5 to 10ul Pipette Volume Range 0.5 to 1 (more)0 ul Accuracy 1.6% / 0.16 ul at 10 ul Pipette Type Air Displacement Features - Ergonomic design ensures a comfortable grip for all hand sizes and both right- and left-handed users - True one-handed operation allows for easy volume setting, pipetting, and tip ejection without changing grip - Low operating forces and short stroke enable relaxed pipetting during extended use - Volume-change protection prevents accidental adjustments and is easy to operate even with gloves - Easy Calibration technology allows quick, tool-free calibration for consistent accuracy - 360° rotating pipetting unit for personalized comfort and flexible operation - O-ring system ensures easy mounting and ejection of tips, reducing strain during use - Individually removable nose cones and seals for easy cleaning and maintenance The BrandTech Scientific Transferpette S-8 Multichannel M8-10, 0.5 to 10 ul Pipette delivers exceptional precision and ergonomic comfort for high-throughput liquid handling tasks. Designed for efficient work with microplates and PCR plates, this 8-channel air displacement pipette offers a volume range of 0.5 to 10 ul, making it ideal for small-volume pipetting. Its low operating forces and short stroke design ensure fatigue-free use during extended pipetting sessions, while the ergonomic grip comfortably fits all hand sizes for both right- and left-handed users. True one-handed operation allows for seamless volume adjustment, pipetting, and tip ejection without altering grip, streamlining workflow. The integrated volume-change protection prevents accidental adjustments, ensuring consistent accuracy, while Easy Calibration technology allows for fast, tool-free calibration to maintain peak performance. Each channel features individual O-rings for easy mounting and ejection of tips, reducing strain and simplifying use. The pipetting unit rotates 360°, providing personalized comfort and flexibility. With precise performance and user-friendly design, the Transferpette S-8 Multichannel M8-10 is the perfect solution for efficient and reliable multichannel pipetting.Click Here to View Product Video INCLUDED: The BrandTech Scientific Transferpette S-8 Multichannel M8-10, 0.5 to 10ul Pipette includes: - 2 x TipBox - Shelf Mount - Reagent Reservoir - Mounting Wrench - Silicone Grease - 1 Set of Shaft Seals - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The Model 49C combines the unique, time shared dual cell design with an enhanced electronics package (more) and user interface. The outcome is a powerful, easy-to-use, UV photometric based ozone analyzer which offers increased specificity via its balanced optical system. User programmable software capabilities allows selection of frequency at which internal zero/span activation and instrument calibration checks will occur. Additionally, field programmable measurement range settings can be stored in memory for subsequent recall. Extended troubleshooting diagnostics now provide instantaneous indication of instrument operating parameter, status including: pressure flow, DC supply voltages, optical bench temperature, ozonator power supply voltage and lamp voltage.