Varian 7000 FT-IR Spectrometer with FTS 6000 Power Supply Lab

The Varian 640-IR is an affordable, high performance spectrometer designed to make FT-IR spectroscop (more)y easy. With a range of unique, easy to use hardware and software features, it allows even novice users to quickly become productive. It is available in mid-IR or near-IR configurations and is ideally suited to QA/QC applications and identification and verification analyses, and is a perfect educational tool. Spectral range: 7900 – 375 cm-1 Spectral resolution of at least: 0.25 cm-1 The limits of the permissible absolute error of the wave number scale: ± 0.25 cm-1 Signal-to-noise ratio (the number of scans is 100, with a standard configuration with a spectral resolution of 4 cm-1): at least 10000 cm-1 The level of pseudo-scattered light is not more than ± 0.1% Integration time: 5 s Monochromator: high-speed Cerny-Turner As-is No software No warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Perkin Elmer AutoIMAGE FT-IR Microscope was removed from a university lab where it was surplus  (more)to requirements. The item powers on and is in a reasonable used cosmetic condition. Included with it is a Perkin Elmer LC Separation Notes Version 1.0 Disc

This Perkin Elmer AutoIMAGE FT-IR Microscope was removed from a university lab where it was surplus  (more)to requirements. The item powers on and is in a reasonable used cosmetic condition. Included with it is a Perkin Elmer LC Separation Notes Version 1.0 Disc

Mutek Infrared Laser System - TLS 150, 0LS150, KMPV50-0.5-J2 Lab The lab confirmed that the sys (more)tem has not been used for 10 years but was working prior to being put away into storage. Mutek Infrared Laser System The Item Powers on and is in Good Condition with Some WearModel - 0LS150 Mutek Infrared TLS 150Model - TLS 150 Kolmar Technologies Infrared Detector Model - KMPV50-0.5-J2 Kolmar Technologies Infrared Detector PSU Has no Information Plate

This Gasmet FT-IR Gas Analyser Spectrometer Model - DX4030 was removed from a university lab wh (more)ere it was surplus to requirement. The unit powers up and we have run a hardware check. Acceptable values for hardware parameters: Cell temp: close to ambient tempCell pressure: close to ambient pressureSource intensity: >50% (original =100%) - Unit showed 89%Interf height: >3V when cell is filled with zero gas (original approx 5.5V - Unit showed 3.57VInterf center: 2000...3000 point - unit showed 2483 pointsElectronic temp: 0...50ºC - unit showed 21.43Detector temp: -37ºC - Unit showed -37.08ºCExt detector temp: +25ºC - Unit showed 19.82ºC Nothing seems out on the acceptable values for the hardware parameters. We then ran the Zero Calibration check after flushing the air for 3 minutes.The unit showed - Min: 115.0000 Max: 58825.0000Acceptable values for Maximum background spectrum are >40 000 or >70% of original. The system is in good cosmetic condition but has some minor marks from use. It comes in Hardigg Storm Case with:-2 x Gasmet Battery UnitsGasmet Software CDQuantitech DongleGasmet DongleGasmet DX4030 Quick Reference Cards2 x Black carry cases

This Varian TV-301 Navigator Turbomolecular Pump was removed from a university lab where it was surp (more)lus to requirements. We have tested this turbo pump using an Avian Turbo V-250 controller, Two stage vacuum pump and Edwards penning gauge for 30 minutes (Not included). It runs smoothly and achieved the pressure of 1x10^-5 mtorr with our set up. It is in great cosmetic condition with only minor usage marks.

Memmert UF55plus Forced Circulation Oven 53L, 115V Working Temperature Range Min. 10°C above ambien (more)t up to +300°C Oven Type Forced Air Circulation Chamber Volume 32 L (1.13 cu.ft.) Features - Working temperature range from Min 10°C above ambient up to +300°C, with a high-resolution display - Volume of 53 L (1.87 cu. ft.), offering ample space for various applications - TwinDISPLAY with multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Comprehensive safety mechanisms including overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB - Function SetpointWAIT ensures processing only begins once the target temperature is reached - AtmoCONTROL software on a USB stick allows for advanced programming, management, and data transfer via Ethernet or USB port - AutoSAFETY features integrated over- and undertemperature monitoring "ASF", automatically adjusting and providing alarms for any temperature deviations - Stainless steel interior with deep drawn ribbing and integrated heating on four sides, designed for easy cleaning and durability The Memmert UF55plus Forced Circulation Oven 53L, 115V is designed to cater to diverse laboratory needs with its advanced temperature control capabilities and substantial internal capacity. It operates within a setting temperature range of +20 to +300°C and boasts a working temperature range that begins just 10°C above ambient, ensuring optimal conditions for a variety of thermal processes. Enhanced with TwinDISPLAY, this model features an adaptive multifunctional digital PID-microprocessor controller complemented by two high-definition TFT-color displays for precise monitoring and adjustments. Safety and efficiency are paramount in the design of the UF55plus. It includes a comprehensive set of safety features such as an overtemperature monitor TWW, an adjustable temperature limiter TWB, and a mechanical temperature limiter TB to prevent overheating. The oven's AutoSAFETY system offers an integrated over- and undertemperature monitor "ASF," which closely follows set parameters and provides timely alarms to safeguard against temperature deviations. Coupled with a robust stainless steel interior that facilitates easy cleaning and uniform heat distribution, the UF55plus is an exemplary choice for professionals seeking a reliable and highly functional heating solution in their laboratories. INCLUDED: TheMemmert UF55plus Forced Circulation Oven 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

F2 Mass Standard - knob weights with adjustment chamber - set (1 g - 10 kg), wooden box Number of pi (more)eces in the set: 17 Weights 1 g i 2 g – solid masses without adjusting chamber

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Motic PA53MET Trinocular Upright Industrial Microscope, 100W Reflected Illumination Objectives S-AP (more)O 5X, 10X, 20X, 50X Objectives Optical System Colour Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Expertly designed, carefully crafted, high-performance Motic objective lenses provide excellent clarity in any observation environment. - Intelligent, Sleek Design - Advanced ergonomic design, compact size, carefully sourced high-quality materials ensure durability. - Versatile digital capabilities minimize fatigue during extended periods of operation. - Innovative Module Design - The compact size of the PA53-MET minimizes required installation space. - Interchangeable individual modules meet the needs of any application. - You can select the appropriate optional accessories for your task: reflected light illuminators, transmitted light illuminators, XY stage, Z-axis, etc. The Motic PA53MET is a trinocular metallurgical microscope featuring a reflected intermediate illumination system suitable for bright field observation. It comes equipped with a 100W halogen lamp house and widefield eyepieces offering 10X magnification and a 25mm field of view. The device includes a coded quintuple revolving nosepiece for BF with a DIC slot, and Plan S-APO objectives at 5X, 10X, 20X, and 50X magnification. Additionally, the PA53 MET's design is highly modular, allowing for future upgrades with motorized components. Motic's PA53 MET series microscopes are tailored for industrial quality control and the analysis of opaque materials. They feature semi-apochromatic objectives that deliver sharp, clear images. The microscope's incident illumination supports various contrast methods, including Brightfield, Darkfield, Polarization, and DIC, revealing defects not visible under standard lighting conditions. INCLUDED: The Motic PA53MET Trinocular Upright Industrial Microscope, 100W Reflected Illumination includes: - S-APO S-APO 5X, 10X, 20X, 50X Objectives - Widefield (FN25) eyepiece 10X/25mm - 4x4 inch right hand stage with metal stage plate - PA-25ND6 neutral density filter and PA-25LB LBD filter - Widefield (FN25) eyepiece 10X/25mm - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty