Safety cabinet for lithium batteries with one door LITHIUMSAFE CHEMISAFE

This listing is for a Trust 1000VA UPS. The unit is in full working condition and is ready for imme (more)diate release. The Trust 1000VA UPS is a compact and dependable uninterruptible power supply designed to protect your electronic devices from power interruptions and fluctuations, ensuring continuous operation. Key Features: Compact Design: The UPS is designed to save space while delivering robust performance, ideal for home offices, small businesses, or IT setups. Power Capacity: 1000VA Rating: Provides a maximum power rating of 1000VA, which is suitable for most computer systems, networking equipment, and peripherals. Surge Protection: Equipped with 3 surge-protected IEC power outlets, it safeguards connected devices from voltage spikes and surges, enhancing the longevity of your equipment. LED Indicators: Green LED: Indicates normal operation when connected to utility power. Yellow LED with Sound: Alerts users to a loss of utility power. Red LED with Sound: Signals an error, such as: Overloading: Connected devices draw more power than the UPS can support. Battery Life Warning: The battery may be nearing the end of its useful life (typically 2-4 years). LCD Display: An easy-to-read LCD provides real-time information on: Input and output voltage Power line status Battery health, allowing users to monitor the UPS performance at a glance. Smart Management Function: The UPS features a smart management function that enables automatic shutdown of connected devices during a mains power outage when connected via USB, preventing data loss and hardware damage. Additional Protection Features: The UPS includes an RFI filter, surge protection, and Automatic Voltage Regulation (AVR), which stabilize voltage fluctuations, ensuring reliable operation. Also provides modem/fax/phone protection to safeguard communication lines. Included Accessories: Comes with a detailed user’s guide and wall power connection, facilitating quick setup and user understanding.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. CONSTRUCTION - Entirely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. - Special insulation for high temperatures (800°C) with high density 300 Kg/m3 calcium silicate and mineral fiber panels (Fibroceramic free) fixed with ceramic adhesives. - Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. ACCESSORIES Q120: QUARANTINE PATENTED extinguishing system with tank for 120 model. LSSA: automatic fire extinguisher. LSCR: automatic fire extinguisher with control panel, smoke and temperature sensor, beacon. CEGSM: GSM dialer. S6MT: UNEL 220V 6-position electrical multiple socket with thermal protection. S6: UNEL 220V 6-position electrical multiple socket. S12: UNEL 220V 12-position electrical multiple socket. RIP120LS: perforated shelf for 120cm cabinets. INTAKE SYSTEMS DIAM125BP: electric aspirator. CSF100BPAMY11: ATEX electric fan. CFN: molecular aspiration system certified according to standard NFX15-211. Per ulteriori informazioni sui prodotti e i sistemi di sicurezza disponibili, ti invitiamo al nostro post dedicato "LITHIUMSAFE".

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. CONSTRUCTION - Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. - Special insulation for high temperatures (800°C) with high density 300 Kg/m3 calcium silicate and mineral fiber panels (Fibroceramic free) fixed with ceramic adhesives. - Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CARATTERISTICHE - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass plug. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges CHEMISAFE QUARANTINE SYSTEM Thanks to this patented system, in the event of a fire inside the safety cabinet, an automatic response will be activated to overturn the shelves, thus allowing the batteries to fall into a water tank located at the bottom. By immersion, the fire will be promptly extinguished and the potential risk of self-ignition will be effectively neutralised. Simple and very effective system! The cabinet is equipped with a water pump and algaecide. The QUARANTINE versions have only 3 shelves instead of the basic 4. Demonstration video of the QUARANTINE system.

This Agilent E8403A VXI Mainframe with N4872A, N4873A, E4809A, E84918 Modules was removed from a uni (more)versity lab where it was surplus to requirements.  The unit powers up and is in reasonably good cosmetic condition. It is missing one of its feet.

DÜPERTHAL safety cabinet Basic UTS BS-5 New equipment (never used) Basic UTS BS-5 Model : 23-060654- (more)401 1 drawer interior fittings, sheet steel Interior dimensions: 45 x 42 x 35 cm (L x D x H) External dimensions: 60 x 50 x 64 cm (L x D x H)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The HRP 5Y.KO series of mass comparators enables calibrating mass standards and weights in accordanc (more)e with OIML Recommendation (R-111) for class F2 and lower classes. Comparators are used to ensure consistency in mass measurements as well as to verify weights according to legal metrology requirements. RADWAG mass comparators have been recognized by calibration laboratories in many countries. The HRP 5Y.KO mass comparators consist of two elements: a professional weighing platform (modern design of an electromagnetic mechanism in a hermetic steel casing) and 5Y terminal. The weighing platform is made of steel and features marks facilitating centric loading of mass standards. The comparator can be equipped with a self-centring weighing pan (extra charge), which significantly minimises the influence of eccentricity during measurements. The self-centring weighing pan eliminates the error of placing the weight "out of pan centre". This solution also enables calibrating weights of different shapes and dimensions without the need to set the positioners for central loading of the mass standard each time. The comparator has a user-friendly menu. Data security and work results archiving are ensured by RADWAG terminal software.

HX7 HR scale’s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7” colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.