LITHIUMSAFE LIGHT EL54 CHEMISAFE

This Dionex UCI-100 HPLC System was removed from a university lab where it was surplus to requiremen (more)ts. The system has been professionally serviced. A full report is available on request. All units are in good cosmetic condition. Included in the system are; 1 x Dionex PDA-Photodiode Array DetectorPN - 054101 1 x Dionex Thermostatted Column Compartment TCC-100PN - 5710.0000 1 x Dionex UCI-100 Universal Chromatography InterfacePN - 5911.0010 1 x Dionex Solvent Rack SOR-100PN - 5030.9200 1 x Dionex P680 HPLC Pump LPG-4PN - 5030.0015 1 x Dionex ASI-100 Automated Sample InjectorPN - 5810.0015

This Powertecnique Uninterruptable Power Supply UPS ARGO 60/MM 0 & Battery Box was removed  (more)from a university lab where it was surplus to requirements. This was last serviced december 2019. We understand they were in use until at least 2021, but may have been offline for some time so it is possible the batteries have failed or do not perform well. The UPS powers up but was not tested further. Both units are in reasonably good cosmetic condition with some marks from use. Included are; 1 x Uninterruptable Power SupplyUPS ARGO 60/MM 0PN - UTO6060035D5 1 x Battery BoxBB 216-7PN - ACCMO606NI-01

set of 2 digital timers 100 min IHM 0706CA - Counter / Down counter - Metal front New material in it (more)s original packaging Counter or Down counter Capacity: 99 min 59 sec per sec Alarm 1 min Sound level: 70 dB (at 1 m) When the sound level increases by 3 dB = the sound intensity (Watt / m2) is multiplied by 2. When the sound level increases by 10 dB = the sound intensity (Watt / m2) is multiplied by 10. Fast increment Programmed time memory Brushed aluminum front Kickstand / Wall mount / Magnet + adhesive metal plate On / Off button Screen: 47x20 mm / Digits: 17 mm D: 72x65x19 mm / 70 g

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

ELD500 Max. Measurement <5x10-12 mbar ls-1 Inlet Connection NW25 Helium Pumping Speed 3.1 ls-1 Fe (more)atures - Color touch screen control with local graphical display and audible leak detection - Wireless models allow simultaneous control of up to 10 leak detectors - Low weight and integrated carry handles which allow it to be bench top or trolley mounted - Allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface - Ensured by class leading 180° mass spectrometer The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.ELD500 WETThe ELD500 WET version uses a small rotary vane backing pump. This is the preferred choice when the unit is operated in an industrial environment and when fast pump down times of large chambers are required.INCLUDED: The Edwards ELD500 - 100-120V 60Hz US Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty

IKA DB 5.2 Vial Dry Block (15 mm)

SCILOGEX SCI-5101XUV Double-Beam Spectrophotometer Wavelength Range 190 to 1,100 nm Wavelength Accu (more)racy ±0.1nm @ 656.1nm; ±0.3nm @ all Optical System Double Beam, Grating 1200 lines/mm Features - 10.1 inches high resolution TFT colored capacitive touch screen and windows graphic interface - Powerful functions like Photometric measurement, Quantitative measurement, Kinetics, Spectrum scan, DNA Protein test, multi-wavelength test, etc - In-house massive memory is capable of saving up to 1024M for test data & working curves - Various optional accessories, like automatic cell holder, thermostatic automatic sampler, adjustable micro cell holder, reflection accessory and integrating sphere, etc. which extend the application range of device and combine the requirements of common samples and special ones - Supports USB storage. The USB port can be used for data transfer, which is easily exported to Excel for further processing, analysis and storage - Xenon lamp light source with extra-long service life saves you the trouble of changing lamps The SCILOGEX SCI-5101XUV Double-Beam Spectrophotometer offers advanced performance and precision for diverse laboratory applications. Featuring a double-beam optical system with a grating of 1200 lines/mm, it delivers accurate and reliable measurements across a wavelength range of 190 to 1100 nm, with a spectral bandwidth of 1nm. The spectrophotometer's 10.1-inch high-resolution TFT colored capacitive touch screen, paired with a Windows graphical interface, ensures intuitive operation and efficient workflow. Supporting multiple functions, including photometric measurement, quantitative analysis, kinetics, spectrum scanning, DNA/protein testing, and multi-wavelength analysis, the SCI-5101XUV is tailored to meet the demands of modern research and testing. This spectrophotometer is equipped with a xenon lamp light source, known for its extended lifespan and stability, reducing the need for frequent lamp changes. It features robust in-house memory capable of storing up to 1024M of test data and working curves, with USB storage functionality for seamless data transfer and export to Excel. The socket-type deuterium and tungsten lamps are designed for quick, alignment-free replacements. Compliant with GLP/GMP standards, the SCI-5101XUV provides comprehensive user management, logging, data tracking, and exporting options. With its durable design, compact footprint, and versatile features, the SCILOGEX SCI-5101XUV Double-Beam Spectrophotometer is an essential tool for laboratories requiring high-performance and compliance.INCLUDED: The SCILOGEX SCI-5101XUV Double-Beam Spectrophotometer includes: - 4 x 10mm Glass Cuvettes - 2 x 10mm Quartz Cuvettes - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

PR4202 Ohaus precision balance The PR Series has been designed for competitive performance at an aff (more)ordable price and offers accuracy and repeatability in essential weighing applications in the laboratory, industrial and educational environments. Featuring RS232 connectivity for easy communication, a backlit display and simple interface for smooth operation, the PR Series scales are perfectly designed for your workstation. Applications Basic Weighing, Parts Counting, Percent Weighing Display Backlit liquid crystal display (LCD). Operation AC adapter (included) Communication RS232 (one port included) Framework ABS top housing, removable stainless steel pan, removable glass draft shield with sliding top door, integrated weigh below hook, safety bracket, calibration lock Construction features User selectable environmental filters, brightness adjustments, auto tare, auto dim, user selectable span setpoints, software lockout and reset menu, user selectable communication settings and print options , user-configurable project and user IDs, software overload and underload protection indicator, stability indicator. Learn how to navigate the Ohaus PR Series menu: