Skalar Reactor and Temperature Control Unit

New Brunswick Scientific Ultra Low Temperature Freezer U535 -86 This was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in full working order. It is in good cosmetic condition, with minor marks from use.

New Brunswick U6785 Ultra Low-Temperature Freezer Lab This item was removed from a university where  (more)it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in reasonably good cosmetic condition and is missing one of its feet. Features: 1 x Shelf: 39 x 28 cm

This New Brunswick Scientific U570 Ultra Low Temperature Freezer was removed from a university lab w (more)here it was surplus to requirements. The unit powers up and was tested overnight. It is in good working order. It is in reasonably good cosmetic condition but has marks from use. Internal dimensions - L58 W77 H126cm3 Shelves - 56 x 76cm

Yamato DR-201-115V Programmable High Temperature Natural Convection Oven 13.75L, 115V Temperature Ra (more)nge Ambient +5°C to 260°C Temperature Distribution Accuracy ± 5.0°C at 260°C Chamber Volume 162L Features - Wide temperature range, maximum operation temperature up to 700°C - Equipped with high operability temperature controller - Can be used as an electric furnace for ashing and sintering, but also as an incubator and drying oven - Temperature, measured temperature and overheat prevention temperature can be digitally set by operation menu and ▲/▼ keys - Easy programmable operation, fixed temperature, quick auto stop, auto stop, program auto start, auto start - Lock function, auto recovery after power failure, calibration offset The Yamato DVS-402C Programmable Natural Convection Oven 99L, 115V offers excellent temperature accuracy and user-friendly operation. It features a 6 pattern PID program controller, capable of executing complex programs (30 steps x 1, 15 steps x 2, 10 steps x 3), and displays both set and measured temperatures simultaneously. This oven operates within a temperature range of room temperature +5 to 260°C, achieving temperature control accuracy of ±1.0°C and distribution accuracy of ±5.0°C at 260°C. It can reach its maximum temperature in approximately 90 minutes. Constructed with a stainless-steel interior and a cold rolled steel plate exterior with a melamine resin baking finish, the DVS-402C is easy to maintain. It features glass wool insulation, a 1.2kW stainless pipe heater, and includes an observation window made of chemically strengthened glass. Additional features include a cable hole, exhaust ports, a comprehensive timer, and various operation functions like Auto Start, Auto Stop, and Quick Auto-stop. Safety is ensured with self-diagnostic functions and an electric leakage breaker with overcurrent protection. The internal dimensions are 450×490×450mm, external dimensions are 560×601×820mm, and it can support a shelf plate load of about 15kg. The DVS-402C is ideal for precise, programmable heating applications. INCLUDED: The Yamato DR-201-115V Programmable High Temperature Natural Convection Oven 13.75L, 115V includes: - 2 x Stainless Steel Perforated Shelves - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato AW-47-115V Semi-Automatic Benchtop Laboratory Glassware Washer, 115V Internal Capacity 300L T (more)emperature Range Ambient +10-210°C Temperature Accuracy ±1°C (at 210°C) Features - Programmable - High precision controller with improved display visibility and operability - Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information - Maximum 99 steps, 99 patterns, repeat operation - Easy sample data collection with cable port - Standard equipped with self diagnostic functions, independent overheat prevention device and earth leakage breaker Semi automatic benchtop glassware washer with upward and downward two-way pressurized water with rotating jet nozzles bringing high level cleaning. Easy to to operate by simply setting time then start. With built-in water heater, no boiler piping and water heating system are required. Optional jet rack is available for hard to clean targets, such as glassware with narrow neck or body. Washing water temp. range: ambient ~60°C.INCLUDED: The Yamato AW-47-115V Semi-Automatic Benchtop Laboratory Glassware Washer, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Accuris MS1000 SmartSeal Semi-Automated Microplate Sealer Sealing Time 0.5 Sec. to 10 Sec. (1 Sec. I (more)ncrements) Temperature Range 80°C to 200°C Heat-Up Time 6 Minutes to Reach 200°C Features - Fast, reproducible sealing of well plates - Adjustable time, temperature, and pressure for optimized sealing - User friendly controls, load plate and press "Run" to seal - Accepts a wide range of plate types and heights, with a maximum height of 48mm - Variety of thermal films can be accommodated, including thin foil films - Time saving solution for labs and production facilities requiring high quality and consistent plate sealing - 2 Year Manufacturer's Warranty

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Grafico delle prestazioni di riscaldamento dei termostati di immersione ECO Silver con vasca in acciaio inox. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

Bruker MicrOTOF Q Mass Spectrometer This item was removed from a university laboratory where it was  (more)surplus to requirements. The mass spectrometer powers on and is in great condition with minimal wear. No further testing has been conducted. Specifications:- Model: micrOTOF-Q - Serial No.: 228888.00074 Included Software:- I/O and Security Software and Documentation - Version: 1.16 - HP / Hewlett-Packard REV.B - CD Kit: 443200-404

set of 6 stainless steel pliers / clamps for stirring platform - 300 ml Erlenmeyer For orbital/recip (more)rocating laboratory shaker New equipment in its original packaging

Benchtop centrifuge Ortoalresa Consul 22. Maximum capacity 4 x 400 mL. Max. 14.300 rpm/21.948 xg. TF (more)T colour touch screen, Indicator of rpm and rcf, time, acceleration/braking, imbalance, programmable speed 10 rpm/10 xg, countdown/increasing clock-programmable intervals from 1 sec to 99 hr and indefinite period of time. Acceleration and braking controllable, 40 memories. Noise level <60 dB. Engine maintenance free. Rotor not included, view available on description or attached file.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Ohaus PX623 Pioneer Analytical Balance The Pioneer PX is a precision weighing tool tailored for lab (more)oratory, industrial, and educational settings. It supports diverse applications from basic weighing to density determination. The instrument features a backlit LCD complemented by a secondary dot matrix line for detailed data visualization. With integrated RS232 and USB interfaces, it ensures efficient data communication, including GLP/GMP outputs synchronized with a real-time clock. Constructed with a durable metal base and removable stainless steel pan, the PX incorporates adjustable features such as environmental filters, auto-tare, and customizable calibration points. Safety indicators and multilingual options further enhance its professional utility.INCLUDED: The Ohaus PX623 Pioneer Analytical Balance includes: - Power Cord - Two Year Manufacturer's Warranty