Sartorius MSA225S Semi Microbalance Analyitical Balance Waage 220g - 0,01 mg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This was removed from a university lab where it was surplus to requirements. Inside dimensions - D57 (more) W76.5 H126cm2 Shelves - 56 x 75cm The unit powers up and the temperature was set to -86 and dropped as low as -86˚c (thermometer read -80˚c) after running for 5 hours. The item is in reasonable cosmetic condition but it is covered in tape marks and residue, and some of the shelf door hinges are broken.

Panasonic MDF-DU300H Ultra-Low Temperature Freezer Lab This item was removed from a university where (more) it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition.

Corepoint Scientific CRTPR061WWW-0 20C to 25C Solid Door Freestanding Undercounter Controlled Room T (more)emperature (CRT) Cabinet Temperature Setpoint Range 20°C to 25°C Capacity 5.2 cu. ft. (147.2L) Defrost Method Cycle Features - Microprocessor temperature controller with digital display for precise temperature management - Interior fan-driven, forced-draft air circulation system for excellent temperature uniformity and recovery - Audible and visual high/low temperature alarms with remote alarm contacts - Three adjustable shelves with guard rails and a bottom footed shelf for air circulation - Right-hinged solid swing door with keyed lock and magnetic gasket for security - LED interior light with switch activation and probe access port - Freestanding thermometer with 3-year calibration certificate and min/max memory - Environmentally friendly HFC-free refrigerant (R600a) and high-density urethane foam insulation The Corepoint Scientific CRTPR061WWW-0 20°C to 25°C Solid Door Freestanding Undercounter Controlled Room Temperature (CRT) Cabinet is designed for precise temperature control and reliable storage. This 5.2 cu. ft. capacity cabinet features a microprocessor temperature controller with a digital display, ensuring accurate temperature management within the adjustable range of 20°C to 25°C. An interior fan-driven, forced-draft air circulation system provides excellent temperature uniformity and recovery after door openings. The cabinet is equipped with audible and visual high/low temperature alarms, remote alarm contacts, and two probes (one in air and one in a sample bottle) for enhanced monitoring. Additional features include a right-hinged solid swing door, three adjustable shelves with guard rails, a bottom footed shelf for air circulation, and a back wall evaporator cover. Security is ensured with a keyed door lock and magnetic door gasket. The unit also includes a freestanding thermometer with a 3-year calibration certificate, min/max memory, switchable °F/°C, an LED interior light, switch-activated light, probe access port, leveling legs, and a powder-coated exterior. It uses environmentally friendly HFC-free refrigerant (R600a) and high-density urethane foam insulation. This cabinet is ideal for storing medications and other sensitive products, preventing unnecessary expenses and product recalls. INCLUDED: The Corepoint Scientific CRTPR061WWW-0 20C to 25C Solid Door Freestanding Undercounter Controlled Room Temperature (CRT) Cabinet includes: - Key for Door Lock - 3 x Adjustable Shelves - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Carl Zeiss MCS 500 System & Multiplexer These units were removed from a university lab where th (more)ey were surplus to requirements. Everything powers up and the lab confirmed it was in working order when last used. Included are; Carl Zeiss MCS 500 System Spektrometer BLX500-4 + MCS 522 UV-VISModel: MCS 500Serial#: 028989 Carl Zeiss Multiplexer Model: MultiplexerSerial#: 021166 Carl Zeiss EnclosureModel: Double Ch.Syst.Serial#: 029050 RS-LINK 1.2Serial#: 1806-1009 PSM-V24/FO-G/S (Qty. 2)

MA X2.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

IKA C-MAG HP 4 Hot Plate Volume Max. 5 L Plate Dimensions (mm) 100 x 100 Working Temperature 50 - 5 (more)00 °C Features - Fixed safety circuit of 550 °C - Hot Top indicator >hot surface warning to prevent burns! - Exact temperature setting via digital display (LED) - Digital error code display - Elevated control panel for protection against leaking liquids The C-MAG HP 4 hotplate features a durable ceramic glass surface with excellent chemical resistance. It has a fixed safety circuit of 550 °C, a Hot Top indicator for burn prevention, and an exact temperature setting via a digital LED display. Designed with an elevated control panel to protect against leaks, it offers a single heating point with a 250 W output, heating from 50 to 500 °C, and a turning knob for control. Compact and lightweight, it measures 150 x 105 x 260 mm and weighs 3 kg, suitable for up to 5 liters of volume. It operates at 120 V, 50/60 Hz, with a power input of 255 W, and meets IP 21 protection standards. Click Here to View Product Video INCLUDED: The IKA C-MAG HP 4 Hot Plate includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA C-MAG HP 4 Hot Plate Specifications Number of heating points1Heat output250 WHeating temperature range50 - 500 °CHeat controlTurning knobSet temperature resolution10 ±KVolume max.5 l Heating rate heating plate2.5 K/min Set-up plate materialceramic Set-up plate dimensions100 x 100 mmDimensions (W x H x D)150 x 105 x 260 mmWeight3 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage230 / 120 / 100 VFrequency50/60 HzPower input255 WComparison of ModelsSpecificationsC-MAG HP 10C-MAG HP 4C-MAG HP 7Heat Output (W)15002501000Heating Temperature Range (°C)50 - 50050 - 50050 - 500Volume Max. (l)15510Heating Rate Heating Plate (K/min)52.55Set-Up Plate MaterialCeramicCeramicCeramicSet-Up Plate Dimensions (mm)260 x 260100 x 100180 x 180Dimensions (W x H x D) (mm)300 x 105 x 415150 x 105 x 260220 x 105 x 330Voltage (V)230 / 120 / 100230 / 120 / 100230 / 120 / 100.comparison-table tr td:nth-child(3) { background-color: #fffacd; }

Hermle Z366 Centrifuge w/ Swing Out Rotor For applications requiring increased capacity over the Z30 (more)6 or Z326 series centrifuges, the Z366 series offers a unique “Mid-Range” swing out rotor that accepts a variety of different tubes, including up to 16 x 50ml or 40 x 15ml. Despite this step up in capacity, the Z366 maintains a surprisingly compact design, with the standard air-cooled model featuring a footprint of 17 x 20 inches. In addition to the popular 4 x 250ml swing out rotor, a variety of additional rotors are also available. Angled rotors range from a 24 x 1.5ml micro rotor to a high capacity 6 x 250ml rotor. A 2 x 3 microplate rotor is also available, as well as a 4 x PCR strips (8-strips) rotor. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates, and change the end of run alarm tone. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z366 Centrifuge w/ Swing Out Rotor includes: - Z366-250-HC 4 x 250ml Capacity Swing Out Rotor - Z366-250-B50 4 x 50ml Conical Buckets (Set of 2) - Z366-250-B15 10 x 15ml Conical Buckets (Set of 2) - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty