Copley NGI-Cooler Temperature Controlled NGI Environment

MVE CryoShipper 8.5 ltr with ShipsLog 3 Temperature data logger Lab This item was removed from a uni (more)versity where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Neck Opening in (mm): 8.50 (216.0)Overall Height in (mm): 21.5 (546)Outside Diameter in (mm): 14.50 (369) Also includes the following: ShipsLog 3 Temperature data logger.

Revco Scientific LIC-2090W14 Ultra Low Temperature Chest Freezer ULT This item was removed from a un (more)iversity where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). The item's exterior shows wear and tear, with scratches, scuffs, and minor dents, while the interior has light rust. The door seals are deteriorated, and the top lid fails to stay open due to damaged hinges and weakened lid supports, but overall it is still in working order. Included with the freezer are five rack units: 1 x 2 compartment rack 29 x 29 x 56cm 3 x 16 compartment rack 25 x 14 x 56cm 1 x 16 compartment rack 28 x 14 x 56cm

Grant R5 Low Temperature Bath/Circulator + Grant GD120 Thermostat This was removed from a university (more) lab where it was surplus to requirements. The unit powers up and is in good working order (Thermometer not included). It is in good cosmetic condition with minor marks. Includes: -1 x Grant R Series Manual-1 x Grant Thermostat GD120 Manual

Eutech Instruments Salt 6+ Salinity - Temperature Meter Lab This item was removed from a university  (more)lab where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility. Included: - 1 x Instruction manual - 1 x Hard case - 1 x Approx 50ml deionised water - 1 x Approx 50ml 45ppt NaCl solution - 1 x Approx 50ml 25ppt NaCl solution - 1 x Approx 15ml 5ppt NaCl solution

This item has just arrived in our stock. Please enquire for further details.

New Brunswick Scientific U410-45 Ultra Low Temperature Freezer Lab This item was removed from a univ (more)ersity where it was surplus to requirement. It is in good cosmetic condition and good working order, it has been tested to its minimum temperature of -45ºc with our external thermometer reading -43.3ºc. (Not included). This item features: 4 x shelves (55x55cm)

This Viscotek TDA 302 Triple Detector Array was removed from a university lab where it was surplus t (more)o requirements. The unit powers up and the screen works. It is in good cosmetic condition with minor marks.

F2 Mass Standard - slotted weights. Nominal value - 20 kg.

Series PS.X2 The PS.X2 series represents a new advanced level for precision balances. The X2 series  (more)balances feature the latest generation capacitive display providing the maximum comfort of use, available right at your fingertips. Ease of operation, clear menu and practical arrangement of the display guarantee the best ergonomics for your everyday tasks. A wide array of available interfaces facilitate selection of the most optimal means for communication. Personalization taken to the next level The X2 is the only balance available on the market that provides a user with the option to design display using wide selection of widgets. Customised display of X2 series offers direct access to the results of your work and other important information directly from the home screen. The X2 series balances offer unlimited possibilities for cooperation with external devices, providing printing, copying, archiving and data transfer. Built-in IR sensors allow numerous operations (e.g. tarring, transmitting the result to a printer or selecting successive steps of a particular process, etc.) to be performed handsfree, by simply moving a hand across the sensor. The housing is made of plastic, and the pan is made of stainless steel. Databases in X2 series balances In new PS.X2 series balances the information system is based on 7 databases which allow several users to work with database storing several products. The registered weighing results can be subject to further analysis. The data is registered in 7 databases: Users (up to 10 users), Products (up to 5 000 products), Weighments (up to 50 000 weighments), Packaging (up to 100 packaging types), Formulas (up to 100 formulas), Clients (up to 1000 clients), ALIBI memory (up to 512 000 weighments). The X2 series features option of making reports on formulas (up to 500 reports). Weighing Data Management USB interface facilitates quick transfer and copying of any results of your work (measurements, reports, databases) to other balances. Network management of the weighing data increases effectivity, productivity and safety of the important data to the maximum. ALIBI Memory The X2 series balances feature ALIBI memory that is a warranty for safety and automatic recording of your measurements. Options such as data preview, copying and archiving are available to users as well. The ALIBI memory allows to record up to 500 000 weighment records. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The ramps are used to easily place the trolleys containing loads onto the 4-load-cell platform scale (more)s. They enable placing the scale into the production line as a measuring or control workstation. Uncomplicated loading and unloading of the weighing platform allows smooth control over the loads and is time saving.

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.

BIOMERIEUX V1222 GRAM NEG (-) 280 µl laboratory pipette Fixed volume pipette: 280 µl Not calibrated  (more)Test performed using a 10-4 g (0.1mg) balance: Reading (in g) for 145 µl: 0.282