Box of 200 Semperguard Xtra Lite nitrile gloves size S 6-7

This was removed from a university lab where it was surplus to requirements. Inside dimensions - D57 (more) W76.5 H126cm2 Shelves - 56 x 75cm The unit powers up and the temperature was set to -86 and dropped as low as -86˚c (thermometer read -80˚c) after running for 5 hours. The item is in reasonable cosmetic condition but it is covered in tape marks and residue, and some of the shelf door hinges are broken.

Panasonic MDF-U500VX Ultra Low Temperature Freezer ULT It is in good cosmetic condition and powers o (more)n, we are unable to test it further at our facility. The unit powers up and is in good working order (thermometer not included). It is in very good cosmetic condition internally and externally.

Yamato AW-47-115V Semi-Automatic Benchtop Laboratory Glassware Washer, 115V Internal Capacity 300L T (more)emperature Range Ambient +10-210°C Temperature Accuracy ±1°C (at 210°C) Features - Programmable - High precision controller with improved display visibility and operability - Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information - Maximum 99 steps, 99 patterns, repeat operation - Easy sample data collection with cable port - Standard equipped with self diagnostic functions, independent overheat prevention device and earth leakage breaker Semi automatic benchtop glassware washer with upward and downward two-way pressurized water with rotating jet nozzles bringing high level cleaning. Easy to to operate by simply setting time then start. With built-in water heater, no boiler piping and water heating system are required. Optional jet rack is available for hard to clean targets, such as glassware with narrow neck or body. Washing water temp. range: ambient ~60°C.INCLUDED: The Yamato AW-47-115V Semi-Automatic Benchtop Laboratory Glassware Washer, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Corepoint Scientific NSWDUF211JWJ-1 -50C to -86C Upright Ultra Low Temperature Laboratory Freezer, 2 (more)30V Temperature Setpoint Range -50°C to -86°C Capacity 21 cu. ft. Defrost Method Manual Features - Five insulated inner doors - Microprocessor controller specifications - Touch pad keys and four line display for easy programming - Large LED temperature readout - Audible and visual alarms with silence key for audible alarms - Programmable high and low temperature alarm set points - Programmable access code to limit access to set points and controller configuration - Automatic voltage boost to compensate for low line voltages - Normally open, normally closed alarm contacts and 4-20mA signal available to connect to central alarm system - RS-232 serial output - Battery backup on electronics during power outages The Corepoint Scientific NSWDUF211JWJ-1 -50°C to -86°C Upright Ultra Low Temperature Laboratory Freezer, 230V, is designed for demanding cold storage applications, ensuring the safe storage of samples and reagents. This 21 cu. ft. capacity freezer features high efficiency and low noise operation with two compressors maintaining a 300 BTUh reserve capacity. The interior includes a triple gasket seal, vacuum relief port, five double-walled insulated inner doors, and four heavy-duty stainless steel adjustable shelves. Equipped with a microprocessor controller, the unit offers touch pad keys, a large LED temperature readout, and audible and visual alarms with a silence key. Programmable high and low temperature alarm set points and an access code limit access to set points and controller configuration. Additional features include automatic voltage boost for low line voltages, alarm contacts, a 4-20mA signal for central alarm system connection, RS-232 serial output, and battery backup during power outages. The temperature range is -50°C to -86°C. The freezer also has a cam action handle with key lock, door switch for alarms, four heavy-duty swivel casters with locks, and CFC-free refrigerant. Made in the USA, this unit is ideal for laboratories requiring ultra-low temperature storage. INCLUDED: The Corepoint Scientific NSWDUF211JWJ-1 -50C to -86C Upright Ultra Low Temperature Laboratory Freezer, 230V includes: - Key for Door Lock - 4 x Adjustable Shelves - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Thermo Scientific FiberLite F15-8x50cy Fixed Angle Rotor The FiberLite F15-8x50cy rotor is brand new (more), and designed for use with Thermo Scientific XT/XF Series, X1/X3 Series, SL40F centrifuges. Constructed from lightweight carbon fiber for enhanced performance and durability, this rotor is designed for exceptional structural integrity and wear resistance. Capable of reaching up to 14,500 rpm, it achieves higher G-forces for shorter centrifugation times and accommodates a capacity of 8x50ml conical tubes. INCLUDED: The Thermo Scientific FiberLite F15-8x50cy Fixed Angle Rotor includes: - Rotor Lid - Manufacturer's Documentation - 1 Year Full Parts and Labor Warranty Thermo Scientific FiberLite F15-8x50cy Fixed Angle Rotor SpecificationsMaximum Speed14,500 RPMMaximum RCF24,446 x gMaximum Capacity8 x 50 mL Conical TubesMaximum Radius10.4 cmCentrifuge CompatibilityThermo Scientific XT/XF, X1/X3, SL40F Series CentrifugesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

Ohaus SHHD6825DG Heavy Duty Shaker The Ohaus SHHD6825DG Digital 68 kg Capacity Orbital Shaker is the (more) largest capacity shaker designed for the heaviest of loads. They have the most powerful drive mechanism of all the shakers and large orbits for optimal shaking of larger vessels with an orbit of 1 inch. With load capacities from 150 lbs and over 70 accessory options and with microprocessor control to provide variable speed and consistent shaking, while ramping to the set speed. Microprocessor displays the last set-point and will restart if power is interrupted. Built-in tray and non-slip rubber mat included with the SHHD6825DG. The exclusive Accu-Drive shaking system on digital models utilizes dual-speed sensors to continuously monitor and maintain shaking speed - delivering exceptional speed control, accuracy & durability. Touchpad controls with independent LEDs for speed/time allow operator to view all settings at once. Timer displays elapsed time or when programmed to a set time, will turn off when time reaches zero. Speed ramping feature slowly increases the speed to desired setpoint to avoid splashing. The load sensor detects unbalanced conditions and automatically reduces rpm to a safe speed to protect samples.Click Here to View Product Video INCLUDED: The Ohaus SHHD6825DG Heavy Duty Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson Pipetman L P10L 1 - 10 uL, Metal Ejector Pipette Designed for performance and comfort, PIPETM (more)AN® L comesin a comprehensive range of models adapted to your needs in the lab. Comfortable, precise, accurate, and reliable, use PIPETMAN L pipettesconfidently in your applications. Available as a fixed or variable volume, the PIPETMAN Lair-displacement pipettes cover a full volume range, including: - Variable volume single channel models covering a volumerange from 0.2 μL to 10 mL - Variable volume multichannel models covering a volumerange from 0.5 μL to 1200 μL, including four models equipped with V-rings (VR)at the bottom of the tip holder for a proper fit with most tip brands, coveringa volume range from 20 µL to 300 µL - Fixed volume single channel models covering a volumerange from 1 μL to 5000 μL Convenient UseLightweight and balanced, PIPETMAN L combines anergonomic design with minimized pipetting forces, giving you the ability topipette longer without fatigue. Right-handed or left-handed? No problem. Adjust thelocation of the tip ejector to the most comfortable position for you. Secure PipettingReduce pipetting errors and avoid accidental volumechanges during pipetting cycles with a true volume-locking mechanism forimproved accuracy and precision. PIPETMAN L variable volume models are all fullyautoclavable without disassembly for maximum convenience and protection fromcross-contamination. Large volume models are equipped with a plastic tipejector to avoid direct contact with the tip and better compatibility withchemicals. Choose Your Tip EjectorFor single channel models, choose between a model with astainless-steel tip ejector or a plastic ejector, depending on your needs andapplications. GLP CompliancePIPETMAN L models feature a DataMatrix 2D code for easytraceability. Use a 2D code scanner to transfer the code automatically into anytraceability or asset management system. Also, the pipette serial number isengraved on the body of the pipette for unique identification. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson Pipetman L P10L 1 - 10 uL, Metal Ejector Pipette includes: - Operator's Guide - 3 Year Manufacturer Warranty Gilson Pipetman L P10L 1 - 10 uL, Metal Ejector Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeManual Air DisplacementVolume Range1 - 10 µLPipette ModelP10LPipette RangePIPETMAN LNumber of Channels1Ejector TypeMetalPack Size1Pack Size UnitEachComparison of ModelsSpecificationsP2L (0.2 - 2 µL)P10L (1 - 10 µL)P20L (2 - 20 µL)P100L (10 - 100 µL)P200L (20 - 200 µL)P1000L (100 - 1000 µL)P5000L (500 - 5000 µL)P10 mL (1 - 10 mL)Adjustable or Fixed VolumeAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustablePipette TypeManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementVolume Range0.2 - 2 µL1 - 10 µL2 - 20 µL10 - 100 µL20 - 200 µL100 - 1000 µL500 - 5000 µL1 - 10 mLNumber of Channels11111111.comparison-table tr td:nth-child(3) { background-color: #fffacd; }Request a Formal Quote