Mettler Toledo FiveEasy F30 Conductivity Meter Lab

This listing is for a Jenway 3540 pH & Conductivity Meter. The unit is in full working condition an (more)d is ready for immidate realese. The Jenway 3540 is a combined pH and conductivity meter designed for use in laboratories where both parameters need to be measured. It offers a space-saving and flexible approach to measuring pH and conductivity. Key Features Simultaneous display of pH and conductivity: Two independent channels prevent interference between probes. Additional modes: Resistivity, salinity, TDS, and mV measurements are available. Data logger: Autosave and print options with storage of up to 500 readings (250 for each mode). Probes sold separately: Glass combination pH electrode, glass conductivity probe (K=1), and ATC probe are available. Specifications Ranges: Conductivity (0.01µS/cm to 1.999S/cm), pH (2 to 20.000), temperature (10.0 to 105.0°C or 14 to 221°F), and salinity (0 to 99.9ppm). Input impedance: Greater than 1012 ohms. Temperature compensation: Manual or automatic, with a range of 0 to 100°C. Dimensions: 210 x 250 x 55 mm (L x W x H).

This listing is for a Mettler Toledo SevenMulti pH Conductivity Meter. The unit is in full working  (more)condition and is ready for immidate realese. Unit is supplied with P25 Printer. The SevenMulti is a versatile, professional-grade instrument tailored for precise measurements in various scientific and industrial applications, including environmental testing, laboratory research, and quality control in manufacturing. Key Features: pH Measurement: Range: -2 to 19.999, accommodating a wide range of acidic to basic solutions. Selectable Resolution: Users can adjust the resolution for enhanced accuracy based on specific requirements. Multi-Parameter Capability: Measures conductivity, resistivity, salinity, and total dissolved solids (TDS) with high precision, making it suitable for diverse applications, from water quality analysis to chemical manufacturing. Temperature Measurement: Range: -30 to 130 °C, suitable for various environmental conditions. Resolution: 0.1 °C, ensuring precise temperature readings that are critical for accurate pH and conductivity measurements. Integrated Electrode Testing: Conducts a comprehensive pH electrode test to assess slope, offset, drift, and response time without needing to recalibrate, ensuring reliable and consistent performance. Compliance with Standards: Features a special mode for measuring conductivity compliant with USP and EP standards, essential for pharmaceutical and food industry applications. User-Friendly Interface: The back-lit display offers clear visibility of measurements and settings, even during two-channel operations. Context-sensitive help guides users through processes, reducing the learning curve. Security Features: Includes PIN-protected operation to safeguard sensitive data and settings. General system configurations, like date and time, can also be secured with a personal code. GLP Compliance: Adheres to Good Laboratory Practice (GLP) standards, allowing users to maintain accurate records and documentation of measurements, enhancing reliability for regulatory compliance. Ideal Applications: Laboratory Research: Perfect for academic and industrial labs conducting precise experiments requiring multiple parameter measurements. Environmental Monitoring: Suitable for testing water quality in various environments, from aquaculture to wastewater treatment. Pharmaceutical Quality Control: Essential for ensuring compliance with industry standards in drug manufacturing processes.

This listing is for a Hanna Conmet 1 Pocket Portable Conductivity Tester. The unit is in full worki (more)ng condition and is ready for immidate realese. Hanna Conmet 1 Pocket Portable Conductivity Tester Experience precision on-the-go with the Hanna Conmet 1 Pocket Portable Conductivity Tester, your compact solution for measuring water conductivity with ease! Key Features: Measurement Range: Accurately measures conductivity from 0 to 1999 µS/cm with a resolution of 1 µS/cm. Reliable Accuracy: Ensures dependable results with an accuracy of ±2% Full Scale. Automatic Calibration: Simplifies the calibration process with automatic adjustments at 1413 µS/cm. Temperature Compensation: Features automatic temperature compensation from 0 to 60°C (32 to 140°F), with a coefficient of 2%/°C, ensuring accurate readings in varying conditions. Long Battery Life: Powered by 2 x 1.5V batteries, it boasts approximately 200 hours of usage, complemented by an auto-off feature after 5 minutes of inactivity. Compact Design: Measures 180 x 50 x 25 mm and weighs only 50 grams, making it highly portable. Ideal Applications: Water Quality Testing: Perfect for assessing the conductivity of drinking water, water conditioning, and reverse osmosis systems. Field and Laboratory Use: Its lightweight and compact design make it suitable for both fieldwork and lab environments, allowing for versatile application.

Double measurements everywhere. Designed so that the single press of a button triggers a calibration (more), measurement or review of the stored data. Intelligent Sensor Management (ISM®) ISM® leaves nothing to chance! Calibration data and history are stored in the sensor and automatically transferred upon connection to the instrument. ISM® meter and sensors - a great match The electrode kit contains the instrument and two ISM® sensors. You can benefit from its free features immediately! Specifications - SevenGo Duo pH / Cond meter SG23-EL-Kit Parameter: pH; Conductivity; ORP Channel: Double channel Version kit: Ready-to-use measuring kit Sensor: InLab Expert Go-ISM; InLab 738-ISM PH measuring range: 0 - 14 PH resolution: 0.01 Accuracy pH (±): 0.01 Measurement range (2): 0.1µS / cm - 500mS / cm Conductivity resolution: 0.01 ... 1 Conductivity accuracy (±): 0.5% Measurement range mV 0 Resolution mV: 1 Accuracy mV (±) 1 Temperature range (2): -5 ° C...105°C Temperature resolution: 0.1°C Temperature accuracy (±) pH: ± 0.5 / Cond: ± 0.2 Portable: Yes Compatible with Intelligent sensor management (ISM): Yes Memory capacity: 99 measurements Degree of protection: Watertight and dustproof (IP67) Languages  English Memory size  99 measurements Meter Type  Portable Dual-Channel mV measuring range  -1999..1999 mV

Sensitivity range: 1 µS/cm – 999.9 mS/cm Noise: ±0.5% full scale calibrated range Internal volume: 1 (more)4 µL Flow rate range: 0-100 mL/min Maximum operating pressure: 50 bar Dimensions (WxDxH): 245 x 150 x 100 mm

Art Robbins Instruments Phoenix/RE Model-600-1010-00 Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The previous owner has notified us that the needle requires replacement. This item includes:- Phoenix/RE - DeeracFluidics Spot On - Melcor Thermoelectric Temperature Controller MTTC1410 - Various Cables and Wires

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-41084 Spare BD ReservoirITEM-40975 Multi Myograph Model 610MITEM-39177 2 x Gould + SensorMedics Calibration SyringesITEM-39178 Lot Of Miele Washer ShelvingITEM-39179 Miele Washer Cleaning RackITEM-39992 Angela Scientific 300 MicrotomeITEM-41090 Corning Stirrer/HotplateITEM-41091 Taylor Wharton M284 AlarmITEM-41092 Dewar TrolleyITEM-41093 Anglicon Fermenter Control PanelITEM-41094 Acurite Millivision MonitorITEM-41095 4 x Biolab UnitsITEM-05745 A & D Instruments Balance ScalesITEM-06756 Vintage Stanton Instruments Unimatic CL42 Digital Scales Broken Power SupplyITEM-02592 Set of 5 Laboratory Balances / Weighing Scales Sauter, Gallenkamp, ITEM-40042 Hettich EBA 12 CentrifugeITEM-40043 HETTICH - MIKRO 200ITEM-04208 Assortment of Capillaries, Fibre Optic Lamps, fuses etcITEM-09234ITEM-09492 selection of pipette accessoriesITEM-10640 Toshiba SD-K740 Progressive Scan DVD PlayerITEM-14004ITEM-05139 Plastic Box Full Of Pipettes

This FASTER BH-EN 2004-D Class II Biological Safety Cabinet was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in working order. It is in good cosmetic condition with minor marks from use. Internal Dimensions are W 119cm x D 59cm x H 73cm.

This  Beckman Coulter Optima LE-80K Ultracentrifuge was removed from a university lab where it  (more)was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. Included with it are; 1x Beckman Coulter 6 bucket SW 28 RotorMax RPM: 28000 6x Beckman Coulter SW 28 swinging buckets/50 ml tube adapter 1x Beckman Coulter rotor bag 4x Boxes of Beckman Coulter Pollyallomer Centrifuge Tubes 14 x 89 mm 2x Boxes of Beckman Coulter Ultra-Clear Centrifuge Tubes 25 x 89 mm 1x Beckman Coulter Spincote Lubricant 1x Beckman Coulter Silicone Vacuum Grease 1x Beckman Coulter Release tool 1x Beckman Coulter Rotor Safety Manual 1x Beckman Coulter Rotors and Tubes instruction CD

CY10 scale’s multi functions The CY10 series multifuncional scale is designed for fast, accura (more)te and repeatable weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 multifuncional scale: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Multifunctional scale, including labelling scale If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series multifuncional scale can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Scilogex D160 Homogenizer Stand H-370 INCLUDED: The Scilogex D160 Homogenizer Stand H-370 includes (more): - Manufacturer's Documentation - 1 Year Manufacturer's Warranty