Jenway 3540 pH & Conductivity Meter

This listing is for a Jenway 3540 pH & Conductivity Meter. The unit is in full working condition an (more)d is ready for immidate realese. The Jenway 3540 is a combined pH and conductivity meter designed for use in laboratories where both parameters need to be measured. It offers a space-saving and flexible approach to measuring pH and conductivity. Key Features Simultaneous display of pH and conductivity: Two independent channels prevent interference between probes. Additional modes: Resistivity, salinity, TDS, and mV measurements are available. Data logger: Autosave and print options with storage of up to 500 readings (250 for each mode). Probes sold separately: Glass combination pH electrode, glass conductivity probe (K=1), and ATC probe are available. Specifications Ranges: Conductivity (0.01µS/cm to 1.999S/cm), pH (2 to 20.000), temperature (10.0 to 105.0°C or 14 to 221°F), and salinity (0 to 99.9ppm). Input impedance: Greater than 1012 ohms. Temperature compensation: Manual or automatic, with a range of 0 to 100°C. Dimensions: 210 x 250 x 55 mm (L x W x H).

Double measurements everywhere. Designed so that the single press of a button triggers a calibration (more), measurement or review of the stored data. Intelligent Sensor Management (ISM®) ISM® leaves nothing to chance! Calibration data and history are stored in the sensor and automatically transferred upon connection to the instrument. ISM® meter and sensors - a great match The electrode kit contains the instrument and two ISM® sensors. You can benefit from its free features immediately! Specifications - SevenGo Duo pH / Cond meter SG23-EL-Kit Parameter: pH; Conductivity; ORP Channel: Double channel Version kit: Ready-to-use measuring kit Sensor: InLab Expert Go-ISM; InLab 738-ISM PH measuring range: 0 - 14 PH resolution: 0.01 Accuracy pH (±): 0.01 Measurement range (2): 0.1µS / cm - 500mS / cm Conductivity resolution: 0.01 ... 1 Conductivity accuracy (±): 0.5% Measurement range mV 0 Resolution mV: 1 Accuracy mV (±) 1 Temperature range (2): -5 ° C...105°C Temperature resolution: 0.1°C Temperature accuracy (±) pH: ± 0.5 / Cond: ± 0.2 Portable: Yes Compatible with Intelligent sensor management (ISM): Yes Memory capacity: 99 measurements Degree of protection: Watertight and dustproof (IP67) Languages  English Memory size  99 measurements Meter Type  Portable Dual-Channel mV measuring range  -1999..1999 mV

Sensitivity range: 1 µS/cm – 999.9 mS/cm Noise: ±0.5% full scale calibrated range Internal volume: 1 (more)4 µL Flow rate range: 0-100 mL/min Maximum operating pressure: 50 bar Dimensions (WxDxH): 245 x 150 x 100 mm

As-is No warranty

You can start a measurement or calibration with just one push of a button. The menu settings are int (more)uitive and consist of complete sentences in 12 languages. Read all relevant data at a glance, thanks to the 4.3″ color display with large numbers and clear icons. Increase the productivity of your instrument by connecting peripherals such as a printer, PC, USB stick and barcode reader. Parameter: Conductivity Channel: Single Channel Conductivity measurement range: 0.001 μS/cm to 1000 mS/cm Conductivity resolution: 0.001 to 1 Conductivity accuracy: ±0.5% Ease of Use: Multilingual Menu, Calibration Support Security & Compliance: Password Protection, GLP, User Management Memory size: 1,000 measurements Data transfer: PC, Printer, USB stick Flexibility and modularity: Stirrer, Barcode Scanner Protection class: Waterproof and dustproof (IP54) Compatible with Intelligent Sensor Management (ISM): Yes

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. Versatility of Applications Varied Standards: The set consists of 12 flat polygonal sheets and 17 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 brushes, 2 tweezers and gloves, facilitating precise and safe cleaning and handling of the standards. Elegant Packaging: The standards are delivered in an elegant wooden box, ensuring their safe storage and transportation. *The mg unit mass standards are flat polygonal sheets. **The 1 mg, 2 mg and 5 mg mass standards are made of aluminum.

Boekel Scientific 135000 TTT Incubator, 115VSpecifically designed for maximumtemperature stability a (more)nd uniformity the Boekel Scientific 135000 TTT Incubatoror “Tight Temperature Tolerance” incubator uses mechanical convection and anoptimized configuration. Ideal for waste water/water quality testing,microbiological testing, or any small sample temperature sensitive process. TheTTT incubator includes a removable shelf, a large viewing window and an easy touse digital control system with a configurable alarm and timer. The TTT isrecommended for use with plates, trays and 100ml samples in testing forheterotrophic bacteria including coliform, enterococci, and pseudomonasaeruginosa. The 0.34 cubic foot (9.62l) unit can hold twelve 120mL bottles oreight 250ml bottles or multiple trays and plates. Boekel incubators are usedworldwide in research and medical institutes, water quality testinglaboratories, food and beverage quality control labs. Maximum temperature stability and uniformity. Easy to use digital interface with configurable timer and alarm. Large viewing window. Two year Warranty. Click Here to View Product Video INCLUDED: The Boekel Scientific 135000 TTT Incubator, 115V includes: - One Shelf - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty