Waters Alliance HPLC System - 2695 Separations, 486, with PC & Software Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This MERCK HITACHI Interface D-7000 was removed from a university lab where it was surplus to requir (more)ements. The unit powers up but it has not been tested further. It is in reasonably good cosmetic condition but has some marks from use. There are rust stains on the metal back panel as well as scratches and sticker residue.

AZURA preparative HPLC pump P 2.1L covers wide flow rate range and pressure capabilities. It has bee (more)n designed for purification of mg and gram samples. The Mobile Control allows intuitive control in stand-alone operation. The integrated automatic recognition of the pump head with RFID technology allows fast adaptions of the pump for various applications. Preparative pump offers wide range of flow rates (0.1-1000 ml/min) Choice of different LC software platforms Improved electronic drive compensation Integrated compressibility compensation Integrated leak management Constant pressure operation mode Solvent delivery Pump type: Preparative HPLC pump Delivery system: double piston pump with Al²O³ pistons Pump head: 250 ml/min Pump head materials: titanium Pressure sensor materials: PEEK (Polyether ether ketone) Maximum delivery pressure: 22.5 MPa (225 bar, 3260 psi) up to 100 ml/min, 20 MPa (200 bar, 2900 psi) at 250 ml/min Flow rate range: 0.1-250 ml/min, 0.5-200 ml/min (recommended) Flow rate increment: 0.01 ml/min Flow rate accuracy: ± 2 %, measured at 5 – 50 % of flow range using ethanol/water 10:90 Flow rate precision: < 0.2 % RSD Gradient support: isocratic, upgradeable to a binary HPG system with additionalpump P 2.1L or to a binary orternary LPG system HPG: gradient accuracy: ± 2 % (5 – 95 %, measured at 5 – 50 % of flow range, water/caffeine tracer) HPG: gradient precision: 1 % RSD, based on retention time at constant room temperature LPG: gradient accuracy:  ± 3 % (5 – 95 %, measured at 5 – 50 % of the flow range, water/caffeine tracer) LPG: gradient precision: 2 % RSD, based on retention time at constant room System protection: soft start, Pmin and Pmax are programmable Wetted materials: titanium,stainless steel, graphite fiber reinforced PTFE, FKM, PEEK, sapphire, aluminum oxide (Al²O³) Ambient conditions: temperature range: 10–40 °C; 50–104 °F, air humidity: below 90 % humidity (non condensing) Leak sensor: Yes Communication Control: LAN; RS-232; analog and event controlled Analog inputs: 0-10 V Analog control input: flow rate Level/event outputs: 8 event outputs (TTL, OC, relays) Programming: 19 programs + 9 links (to programs) + 1 wake up program Special features: system pump head is detected automatically using radio frequency identification (RFID) General Power supply: voltage range: 100 – 240 V, 50 – 60 Hz Dimensions: 361 x 208.2 x 523 mm (W x H x D) Weight: 19 kg

Programmable flow rate: 0.00 to 5.00 mL/min, 0.01 mL/min increments Maximum operating pressure: 401  (more)bar Pressure ripple: <2% at 0.5mL/min Flow precision: 2 seconds SD Flow accuracy: 2% of setting Gradient accuracy: <1% between 10 to 90% Gradient precisison: <0.5% RSD between 10 to 90% Gradient delay volume: <60 µL (without mixer), <200 µL (with one 50 µL mixer) Inline degasser channels: 2 Dimensions (HxDxW): 430 x 610 x 305 mm Weight: 27.2 kg

HP HPLC System 1100 Series This was removed from a university lab where it was surplus to requiremen (more)ts. The lab confirmed the system was working prior to removal. Included are; 1x Vacuum DegasserPr No. G1322AThe unit powers up and is in good cosmetic condition. 1x Quat PumpPr No. G1311AThe unit powers up and is in good cosmetic condition. 1x ALSPr No. G1313AThe unit powers up and is in good cosmetic condition.

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - AUTOMATIC DEFROSTING function - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of the models. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase your possibilities with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

4 x Melles Griot Optical Table Passive Isolator Legs This was removed from a university lab where i (more)t was surplus to requirements. The units are in good cosmetic condition but have not been tested. Product#: 07 OTi055Serial#:&nbsp;700247Load Capacity: 1100kgAir supply pressure: 80PSi

Beckman Coulter Biomek NXP Lab Automated Workstation With PC, Software, Tips This was removed from a (more) university lab where it was surplus to requirements. The lab confirmed that although it was installed in 2011, it had never been used once and is essentially brand neIt is in good cosmetic condition with minor marks from use. The system includes: Biomek NXP WorkstationSerial No. A318410608 Beckman Coulter FX Device ControllerCat No. 719366Serial No. 00717635AM0718110002 Beckman Coulter AccuframeSerial No. 00717820AG0711110001 ThinkCentre PC with Windows 7Serial No. 1S5852BL2MJWLDN9 Software:Biomek System Install Disk v3.3Beckman Coulter Sami Workstation Software v4.0Beckman Coulter Recovery DVD MORBK29ABiomek Tutorials v3.3Accounts and Permissions v3.1 Additional parts/Accessories:2 x Manuals Biomek NX and NXP v3.3 Tutorial1 x Active Curtain test rodBeckman Coulter P200 pipette tips 340 racks (96 tips/rack) in sealed boxes1 x Roylan Developments StoragePod Dundee serial No. 000224&nbsp;15 x 14 x 40cm1 x complete front polycarbonate safety screen kit with all parts and fixings10 x data leads120 x 96 well plates, chimney well TC with lids5 x workstation table fittings9 x microplate holders1 x pipette exchanger holder12 x ferrite cable noise reducers

Balance of the AS X2 PLUS series is an advanced analytical weighing device of the SYNERGY LAB line.  (more)The AS X2 PLUS is exceptional due to a range of modern constructional and system solutions that guarantee reliability, precision and accuracy of measurement, and make everyday operation easy. Ergonomic Mechanical Design The latest AS X2 PLUS analytical balance features spacious weighing chamber, and the open-door clearance facilitates easy access to the weighing pan. With this it is possible to use laboratory glassware of various sizes. New aluminium base is a guarantee for weighing system stability. Dual-CLICK system allows tool-free assembly and disassembly of the weighing chamber, and a special design of guides for weighing chamber panes (no rims) makes keeping the device clean convenient. Innovative construction solutions increase balance durability and reliability in long-term operation. Colour Touch Screen The latest generation touch panel of 5&rdquo; diagonal stands for comfort of operation, even when you have laboratory gloves on. The AS X2 PLUS analytical balances guarantee simple and intuitive communication due to wide selection of widgets. The widgets can be freely configured in accordance with user needs. Screen customization favours access to information and results directly from the home screen. The user can configure a complete set of buttons and assign it to a particular operation mode. He(she) can also define info and text fields. LevelSENSING System The in-built sensors measure tilt, and display graphic message on the weighing device screen. In accordance with GLP and GMP, the LevelSENSING system simplifies the adjustment, ensures an ongoing control of the level and informs about deviations. Internal Adjustment Modernized internal adjustment system guarantees accurate indications in extremely unfavourable conditions. SMARTLab AS X2 PLUS balances are equipped with a SMARTLab system of an extensive functionality. It ensures support and supervision over the mass measurement process and reduces hazard of error caused by so called &bdquo;human factor&rdquo;. Automatic adjustment Regardless of external ambient conditions, the automatic internal adjustment system guarantees 100% efficiency in eliminating balance sensitivity deviations. Sensors Touch-free operation and programmable sensors facilitate daily work and reduce the range of actions performed during the weighing procedure. Alibi memory Data safety is assured with the ALIBI memory, which is integrated into AS X2 PLUS balances. The memory enables record of up to 500 000 weighings and guarantees continuity of data collection over a long period of time. Wi-Fi Remote control of the balance via devices, operation of which is based on Android, IPhone, Windows10 systems. Data control Accessing information in the balance depends on the user&#39;s permission level. The administrator can manage three different permission levels. Automatic Weighing Records Reports on processes and partial weighings can be generated and sent for archiving via the USB to external devices. Ambient Conditions Monitoring Communication with RADWAG thermo-hygro-barometer allows monitoring of ambient conditions such as temperature and atmospheric humidity. Databases Information system of the AS X2 PLUS balances is based on 7 databases that enable operation of many users with numerous products, all the stored data can be subjected to analysis. Weighing data is recorded in 7 databases: &bull; Operators (max 100 entries), &bull; Products (max 5 000 entries), &bull; Weighings (max 50 000 entries), &bull; Packaging (max 100 entries) &bull; Formulations (max 100 entries), &bull; Customers (max 1000 entries), &bull; ALIBI memory (max 512 000 weighings). Additionally it is possible to create formulation reports (max 500 reports). Communication Interfaces The functionality of AS X2 PLUS balances can be expanded using the following communication interfaces: USB-A, USB-B, RS 232, DB9 tara/print, Ethernet, Wi-Fi. The additional USB port located on the front of the balance enables easy and fast communication with the USB flash drive, it is possible to connect additional devices via this port too. AS PLUS balances are equipped with Kensington Lock, which allows to secure the device against theft. Additional option: Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Balance of the AS R1 PLUS series is a standard analytical weighing device of the SYNERGY LAB line. T (more)he AS R1 PLUS is exceptional due to a range of modern constructional and system solutions that guarantee reliability, precision and accuracy of measurement, and make everyday operation easy. Ergonomic Mechanical Design The latest AS R1 PLUS analytical balance features spacious weighing chamber, and the open-door clearance facilitates easy access to the weighing pan. With this it is possible to use laboratory glassware of various sizes. New aluminium base is a guarantee for weighing system stability. Dual-CLICK system allows tool-free assembly and disassembly of the weighing chamber, and a special design of guides for weighing chamber panes (no rims) makes keeping the device clean convenient. Innovative construction solutions increase balance durability and reliability in long-term operation. Levelling System Standard AS R1 PLUS balances are equipped with a levelling device located at the front of the weighing chamber, which facilitates level control. Levelling operation is now simplified and easier due to the reduced quantity of adjustable supporting points (2 points). Intuitive Operation Balances are equipped with LCD display ensuring clear presentation of the weighing result. Direct access to functions and databases is possible via the following keys: Database &ndash; direct access to databases, Function &ndash; direct access to basic functions, F1-F4 &ndash; programmable function keys and menu navigation keys. AS R1 PLUS analytical balances signal operated working mode, computer connection, battery status, weighing and service functions via pictograms. The quantity of displayed weighing units is also expanded. Dedicated status bar enables display of additional messages, e.g. product name, tare value. Real-time mass measurement is presented using bar graph. ALIBI Memory Data safety is ensured by the ALIBI memory integrated into AS R1 PLUS balances, which enables record of up to 100 000 weighings. ALIBI guarantees continuity of data collection over a long period of time. Data Protection Access to valuable information is possible after logging. The administrator manages the data access configuration. Databases The information system is based on 5 databases, which allows several users to work with several product databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: operators (up to 10 users), products (up to 1000 products), weighings (up to 5000 weighings), tares (up to 100 tares), ALIBI memory (up to 100 000 weighings). Communication Interfaces The functionality of AS R1 PLUS balances can be expanded using the following communication interfaces: USB-A, USB-B, RS 232, Ethernet, Wi-Fi (option). The additional USB port located at the front of the balance enables easy and fast communication with the USB flash drive, it is possible to connect additional devices via this port too. AS PLUS balances are equipped with Kensington Lock, which allows to secure the device against theft.

Corepoint Scientific LF171WWW-0HC -15C to -20C Single Swing Solid Door Freezer Temperature Setpoint  (more)Range -15°C to -20°C Capacity 17 cu. ft. Defrost Method Auto Features - Corepoint Scientific™ General Purpose Auto Defrost Hydrocarbon - 4 adjustable shelves - High density urethane foam cabinet and door insulation - Magnetic door gasket for positive seal - Heavy duty door handle The Corepoint Scientific LF171WWW-0HC Single Swing Solid Door Freezer is designed for robust, energy-efficient performance in laboratory, clinical, or industrial settings. Offering 17 cubic feet of storage, it maintains temperatures from -15°C to -20°C with a mechanical thermostat for precision. Features include auto-defrost functionality that reduces maintenance while ensuring a frost-free interior, high-density urethane foam insulation for enhanced energy efficiency, and four adjustable shelves for flexible storage options. The freezer's exterior is made of durable powder-coated steel, and it includes leveling legs for stable placement. Additionally, it uses eco-friendly R600a refrigerant and adheres to UL471 standards with a NEMA 5-15P power plug, making it a reliable and safe choice for demanding environments. INCLUDED: The Corepoint Scientific LF171WWW-0HC -15C to -20C Single Swing Solid Door Freezer includes: - 4 Adjustable Shelves - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty