Thermo Scientific Focus GC Gas Chromatograph

For sale: Agilent FID EPC module, used with series 7820 G3431-60531   Get in contact if you need oth (more)er EPC models for AGilent GC systems

Manufacturer: Environics-IUT Model: ENVI-Air GC-IMS-Analyzer S/N: IM0911.120011 YoM: 2012 Descripti (more)on: The ENVI-Air from Environics is a continuously operating gas analyzer designed for ultra-low level detection of either single or multi-component hazardous gases in ambient air. It will operate indoor or outdoor in the harshest environmental conditions and needs little or no maintenance. The ENVI-Air can detect hazardous gases at far lower concentrations than traditional analyzers and react in real-time. This gives the operator a longer safe response window to take corrective action.It is based on GC-IMS technology. Ion Mobility Spectrometry (IMS) is a simplified atmospheric pressure time-of-flight technique that is highly selective with low ppb to % sensitivity. The GC-IMS adds multi-component separation prior to the IMS analysis. ENVI-Air does not require the use of paper tape, pre-concentrators or chemical reagents.The ENVI-Air is an industrial solution virtually drift free and unaffected by humidity or temperature changes and will be factory calibrated for the compounds of interest for maximum accuracy and reliability. Because of the simplicity of design and limited moving parts, ENVI-Air analyzers will have the lowest maintenance and downtime of any current analyzer system. Measurable Compounds: Ammonia, Acetone, Acrylonitrile, Acetonitrile, Arsine, Benzylchlorid, Bromine, Chlorine, Chlorocyane, BTX, CMME, Ethylene Oxide, Dibutylphthalat (DMP), Dimethylsulfat, HFPO, Hydrazin, Hydrogen Chloride, Hydrogen Bromide, Hydrogen Fluoride, Hydrogen sulfid, TDI, Methyl Bromide, Isopropyl alcohol, Methyl Iodide, Nitrogen dioxide, NMP, PFIB, Phosgene, Phosphine, PGME, PGMEA, Sulfur Dioxide, Triethylamine, Vinyl Chloride. Areas of application: - Oil and Gas Production- Plastics Manufacturing- Semiconductor Fabrication- Chemical Production- Pharmaceutical Manufacturing- Gas Pipeline Safety- Medical Sterilization- Primary Metal Processing Specifications: - Detection Principle: Gas Chromatography - Ion Mobility Spectrometry (IMS)- Ionization: Tritium (3H) No Licence or Wipe Tests Required- Sensitivity: Low ppb range- Moisture: 0% to 90% RH- Warm Up Time: 20 minutes- Measurement Time: Seconds- Power: 220 VAC/19VDC - Carrier Gas: No Carrier Gas Required- Operation Temperature: -10°C to +50°C- Storage Temperature: -40ºC to +50ºC - Enclosure: 19” Rack Mount- Power: 220 VAC/19VDC - Dimensions (L x W x H): 483 x 381 x 89 mm - Weight: 6.44 kg Items delivered: - Environics-IUT ENVI-Air GC-IMS-Analyzer- Instruction manual Condition: The item is in perfect coasmetic as well as operarting condition. It is 100% functional teasted and ready to be used.

Hewlett Packard HP 6890 GC Gas Chromatograph & Agilent 6890 Series Injector This was removed fro (more)m a university lab where it was surplus to requirements. The unit has had the mains power board removed and is sold for spares/repairs. It is in reasonably good cosmetic condition but has some marks from use.

Varian 450-GC GC Gas Chromatograph This was removed from a university lab where it was surplus to re (more)quirements. The unit powers up and is in good cosmetic condition with minor marks. Filters:1x Moisture Filter CP17911x Oxygen Filter CP17970

Perkin Elmer Clarus 500 GC-MS Gas Chromatograph Mass Spectrometer System Lab This system was removed (more) from a university lab where it was surplus to requirements. The system has been professionally serviced and is in good working order. It is in excellent cosmetic condition with minor marks. The full-service report is available on request.

Shimadzu RF-10AXL Spectrofluorometer Detector HPLC Lab This item was removed from a university where (more) it was surplus to requirement. The item is in good cosmetic condition and fully operational. However, the Bulb Hours indicator shows 2263 hours, exceeding the recommended replacement interval of 500 hours. Therefore, it is advisable to replace the bulb before using the item.

Carl Zeiss Stemi 508 Stereo Microscope This system was removed from a university lab where it was su (more)rplus to requirements. The unit in good cosmetic condition, and in full working order. It has been tested using a goldfish scale, and no further testing has been carried out. The system comprises the following: - Microscope Head: - Model: Stemi 508 Body - Microscope Base: - Model: Stand K EDU

Yamato IN-604-115V Refrigerated Incubator Programmable 143L, 115V Refrigerant R134A Operating Temp (more)erature Range Ambient +10-50°C Temperature Accuracy ±0.3°C Features - High accuracy temperature control and temperature distribution - Inner glass door keeps temperature stable during sample observation - Made of Stainless steel (exterior) and Chrome free electronic galvanized plated steel plate chemical proof baking finish (interior) - Includes Self diagnostic function - Comes with 1 Year Manufacturer's Warranty

F2 Mass Standard - knob weights with adjustment chamber - set (1 mg - 5 g), wooden box Number of pie (more)ces in the set: 16 Weights 1 g i 2 g – solid masses without adjusting chamber

Ohaus AX223/E Adventurer Precision Balance Maximum Capacity 220 g Readability 1 mg Repeatability (Ty (more)pical) 1 mg Features - High-accuracy weighing with a maximum capacity of 220 g and 1 mg readability - Reliable external calibration allows for precise measurements and ensures consistent accuracy during routine maintenance - 4.3" full-color VGA touchscreen display with user-controlled brightness for intuitive operation - Dual USB ports for easy data transfer and PC connectivity, meeting traceability requirements - Durable construction with a metal base, ABS top housing, and stainless steel pan for long-term use - Included draftshield with two-piece top-mounted side doors and sliding top door for easy access and reduced bench space usage - Fast 3-second stabilization time improves productivity in routine weighing tasks - RS232 and USB communication ports for seamless connection to printers and other devices - Space-saving design with wide door entry for easy placement of larger weighing vessels The OHAUS Adventurer is a precision instrument, designed to address both routine and specialized weighing needs in modern laboratories. Its interface boasts a 4.3" VGA graphic touchscreen, ensuring intuitive operation. Adhering to GLP/GMP standards, it integrates a three-tier user management system. Communication is streamlined with RS232, USB Host, and USB Device ports, with real-time clock data output capabilities.Constructed for longevity, it comprises a metal base, ABS top housing, and a stainless steel pan. Key design attributes include selectable environmental filters, auto tare functions, and user-definable calibration points. It supports user-specific communication configurations, data print options, and offers a selection of up to nine operating languages.INCLUDED: The Ohaus AX223/E Adventurer Precision Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph 36130500 Titramax 1000 Vibrating Platform Shaker w/ Heating Module and Flat Incubator Hood  (more)Speed Range 150 to 1,350 RPM Temperature Range Ambient +5°C to 65°C Platform Size 290 x 258 mm Features - Used for research requiring rigid or gentle shaking on microtiter plates or test tubes - Includes safety features, ease of use, and increased efficiency - Insulated system prevents heat transfer from the motor, safeguarding samples - Suitable for the modular incubator system with variable temperature control up to 65°C - Medium-sized model with a load capacity of 5kg - Accepts 6 microtiter plates for increased throughput - 1.5mm vibration orbit for gentle mixing with small sample volumes - Analog process timer for unattended operation (1 to 120 minutes) - Acoustic alarm and automatic stop after the set time expires - Variable speed control (150 to 1,350rpm) via analog knob This Tritramax package includes one vibrating platform shaker Titramax 1000, one heating module and one flat incubator hood. Titramax 1000, the incubating model platform shaker, is used for research which requires ridged or gentle shaking for small samples on microtiter plates or test tubes. Includes all standard features for safety, ease of use and increased efficiency. It comes with an insulated system to prevent any heat transfer from the motor that could cause potential thermal damage to your sample. This model is suitable for the modular incubator system and is recommended for applications which require variable temperature control of up to 65° C. It comes with an insulated system to prevent any heat transfer from the motor that could cause potential thermal damage to your sample. It is a medium sized model and accepts load capacities of 5kg. The use of 6 microtiter plates increases your throughput by 50%. The 1.5mm vibration orbit performs gentle mixing with best results using small sample volumes. The analog process timer allows for unattended operation and can be set from 1 to 120 minutes. After time expires this model sends an acoustic alarm and operation is stopped. Set and continuously adjust the variable speed on the analog control knob from 150 to 1,350rpm. The small incubator hood comes with a total height of 163mm and is recommended especially for microtiter plates, culture plates, small flasks, media bottles and Erlenmeyer flasks up to 100ml. The transparent and non-fogging PETG material allows for sample viewing and is easily cleaned. Click Here to View Product Video INCLUDED: The Heidolph 36130500 Titramax 1000 Vibrating Platform Shaker w/ Heating Module and Flat Incubator Hood includes: - Titramax 1000 Shaker - Heating Module - Flat Hood - Power Cord - Three Year Manufacturer's Warranty