Cytiva GE Akta Avant 150 Preparative Protein Purification Chromatography System + Software

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Dionex AS40 Automated Sampler Lab This item was removed from a university where it was surplus to re (more)quirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

This Argonaut Flashmaster Personal Chromatography Stand & Rack was removed from a university lab (more) where it was surplus to requirements. This was removed from a university lab where it was surplus to requirements. The unit powers up with an 18V DC power supply (not included). It was not tested further. It comes with a Radley's Discovery Technologies RackHolds 12 x 50ml tubes

AKTA Prime Plus Chromatography System Lab This item was removed from a university laboratory where i (more)t was surplus to requirements. It powers up and is in good cosmetic condition. However, it displays an error due to the absence of a UV lamp and housing; therefore, these components must be purchased before use. The previous user noted that this system was operational before it was decommissioned.

Applied Biosystems MDS SCIEX QStar System Software This was removed from a university lab where it w (more)as surplus to requirements. Included are the following: 1x Analyst® QS 1.1 SoftwareP/N 1012847 1x Metabolite ID 1.3 for Analyst® QS 1.1 SoftwareP/N 1012866 1x Analyst QS 1.1 Software Validation CertificateDated 03/12/20041x Metabolite ID 1.3 for Analyst® QS 1.1 Validation CertificateDated 03/12/2004. 2x Copies of License Agreement for Analyst® QS 1.1 Software1x Metabolite ID 1.3 for Analyst® QS 1.1 Software Release Notes

This item has just arrived in our stock. Please enquire for further details.

Job Lot Of Swagelok Pressure Gauges + Compression Fittings These were removed from a university lab  (more)where they were surplus to requirements. The parts are as follows: PART NUMBER DESCRIPTION CONDITION QUANTITY PGI-50m-PG25-LASX-ABE Pressure Gauge, Bottom entry, 0-25 Bar - Swagelok BN 18 Valve 1/4" Ball Valve - Boss/Waverley & Others Used 16 3/8" & 3/16" nuts, tees , fittings Swagelok Assorted Assortment ~60mm Panel mount, bottom entry gauge  BNIB 5 PGU-50-PC200-L-4FSF Gauge, bottom entry, UHPurity - Swagelok BN 6 PGU-50-PC200-C-4FSF Rear entry BNB 5 Pressure gauge Oil filled, rear entry, 0-11 Bar New 4 Pressure gauge Bottom entry, 0-11 Bar New 6 Union elbow 3/8" Elbows  6 Union cross 3/8" Crosses  5 Straight union 3/8" Union  14 SS-4WVCR-6-400  BNIB 6 SS-4WVCR-CP  BNIB 6 Union 3/8" Elbow Used 5 SS-810-1-8W 1/2" tube x 1/2" male weld BNIB 2 SS-600-7-6-BMP 3/8" x 1/2"F  2 SS-PB4-TA4 Box of 10 quick connects BNIB 1 SS-PB8-TA8 Box of 10 quick connects BNIB 4 SS-P Box of 10 quick connects BNIB 7 SS-QC4-S-400 Box of 10 quick connects BNIB 3 SS-QC4-B-4PM Box of 10 quick connects BNIB 1 Assorted quick connects Assorted quick connects BN ~50

F2-class mass standards represent an impressive level of precision in mass measurement. Classified a (more)s metrology grade F2, they are recognized as top-quality tools suited for advanced applications where precision is a key element. F2 mass standard: stainless steel wire Nominal value: 1 mg Material: stainless steel Exceptional Measurement Precision F2 class mass standards feature excellent measurement precision achieved through stringent standards for allowable deviation from actual weight. Stability under Dynamic Conditions An important feature of F2-class mass standards is their ability to maintain measurement stability even under dynamic measurement conditions. They are designed to cope with a variety of factors that affect measurement precision. Calibration at the Highest Level The calibration process of F2-class mass standards adheres to the most stringent norms and standards. This makes the standards of this class recognized as tools with the highest degree of accuracy, complying with international requirements. Use of Materials with Outstanding Properties F2 class mass standards are often constructed from materials with outstanding physical properties. This ensures not only excellent precision, but also exceptional durability. Application 1. Scientific Research at the Highest Level In scientific research, especially in fields that require the utmost precision, such as nuclear physics or astrophysics, F2 class mass standards are indispensable. 2. Metrology Industry In metrology laboratories engaged in testing and maintaining the most advanced measurement standards, F2 class standards are indispensable working tools. 3. High-Precision Testing Laboratories In laboratories specializing in research requiring the highest precision, such as forensic laboratories and materials testing, F2 class mass standards are essential. 4. Aerospace Industry In the precision mass measurements required in the aerospace industry, F2 class standards provide reliability and excellence. F2 class mass standards are the symbol of the highest precision in the field of mass measurement. Their use is crucial in the most advanced fields of science, industry and research.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

KIT 195 is a density determination kit intended for laboratory balances featuring 195x195 weighing p (more)an. This stainless steel accessory allows determining density of: solids, liquids. For testing granulates of density value higher or lower than 1 g/cm3 use KIT 85.

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

Ohaus EX10201N Explorer Precision Balance Introducing the OHAUS EX10201N Explorer Precision Balance  (more)- a cutting-edge instrument that brings new levels of precision to your laboratory work. As a part of the OHAUS Explorer Series, this high-performance balance features an exceptional combination of modern design and innovative features, offering unmatched functionality to simplify even the most complex measurements.The EX10201N Explorer Balance stands out with its large color touchscreen, serving as an interactive gateway to its advanced application modes. Its icon-driven application software comes with user-friendly features such as user manager, library, and minimum weight indication. These intelligent features convert the balance into an invaluable assistant in your laboratory operations.In terms of performance, the EX10201N Explorer Balance boasts fast stabilization times, optimized linearity, and repeatability specifications. It offers enhanced vibration filtering for stability and accuracy in all conditions. Plus, users have the choice between traditional calibration models or the convenience of AutoCal™ models, which automatically calibrate the balance for optimum accuracy.The robust modular design of the Explorer is another distinct attribute. With a resilient metal housing, the EX10201N guarantees long-lasting durability even under rigorous use. Moreover, the display module can be detached from the weighing base, allowing it to be tower- or wall-mounted. This design flexibility ensures easy viewing in any workspace, enhancing your weighing experience and efficiency.Step into the future of laboratory measurements with the OHAUS EX10201N Explorer Precision Balance. This high-performance balance delivers unmatched functionality, setting a new standard for precision, reliability, and user-friendly operation.INCLUDED: The Ohaus EX10201N Explorer Precision Balance includes: - Power Cord - One Year Manufacturer's Warranty