METTLER TOLEDO DSC822e Differential Scanning Calorimeter & ThermoHakke EK45/MTMT

This Perkin Elmer Pyris 1 Differential Scanning Calorimeter System was removed from a university lab (more) where it was surplus to requirements. The unit has been inspected and fully tested by a qualified engineer. It was confirmed to be in full working order, but the dongle for the software is missing. Included with it are; 1 x Perkin Elmer Differential Scanning Calorimeter - Pyris 1Part no. N537-0050 1 x Dell Optiplex PC (SN-MQ4ZP) With PYRIS 1 SOFTWARE1 x Microsoft Mouse1 x Dell Keyboard Model - AT102W (SN-M9801-22017)1 x Norgren Gas Regulator1 x Perkin Elmer Pyris 1 Spares Kit (Wooden box)3 x Perkin Elmer cases with small parts1 x Perkin Elmer Hammer accessory1 x Thermometer on stand Everything is in reasonably good cosmetic condition with some marks from age and use.

This Parr Isoperibol Calorimeter 240 was removed from a university lab where it was surplus to requi (more)rements. The item is in reasonable cosmetic condition but has plenty of marks from use and age. The item powered on fine and we could interact with the control panel without issue. We attempted to run a test print and were met with Error 3800. We are told this is due to the O2 requirement and is not a fault with the system. The system was serviced in 2020 not long before it came to us. We were unable to test it further. Also included are the following:1x Parr 1755 Printer1x Parr/Star Power SupplyModel: AD8340

IKA C 3000 Automated Calorimeter Package 1/12 Measuring Range Max. 40000 J Reproducibility Dynamic ( (more)1g Benzoic Acid NBS39i) 0.15% Reproducibility Isoperibol (1g Benzoic Acid NBS39i) 0.05% Features - Easy handling by touch screen operation or a standard USB mouse - Two different starting temperatures to choose from (22°C, 30°C) - Automatic ignition, automatic water filling and draining, automatic oxygen filling - Several interfaces: Ethernet, RS 232, USB, SD card slot - Six temperature sensors to monitor all temperatures allowing best analyses - Spherically shaped decomposition vessel for better pressure stability and faster heat transfer - Easy sample preparation due to new upside down crucible holder technology - Can be operated with a chiller (e.g. RC 2 basic) The IKA C 3000 Automated Calorimeter Package 1/12 combines cutting-edge technology and user-friendly design to deliver precise calorific value measurements with exceptional efficiency. Featuring a responsive touch screen interface and the option to operate via a standard USB mouse, this calorimeter simplifies complex workflows. Its fully automated systems for ignition, water filling and draining, and oxygen filling reduce manual intervention, making it ideal for laboratories with demanding analysis requirements. With the ability to choose between two starting temperatures (22°C and 30°C), the C 3000 adapts to a variety of experimental setups for maximum flexibility. Engineered for accuracy and performance, the C 3000 offers up to six dynamic measurements per hour with a reproducibility of 0.15% RSD and four isoperibol measurements per hour with an impressive reproducibility of 0.05% RSD. The spherically shaped decomposition vessel enhances pressure stability and accelerates heat transfer, ensuring reliable results every time. Six integrated temperature sensors continuously monitor all critical parameters, while the innovative upside-down crucible holder simplifies sample preparation. With support for cooling via a compatible RC 2 Basic chiller, this calorimeter ensures consistent performance even during high-throughput workflows. The IKA C 3000 excels in connectivity and data management, featuring interfaces such as Ethernet, RS232, USB, and an SD card slot. Built for durability, it operates within a working temperature range of 22 to 30°C and meets rigorous international standards, including ASTM, ISO, and DIN specifications. Compact yet robust, with dimensions of 19.7 x 16.7 x 17.7 inches and a weight of 63.9 pounds, the C 3000 fits seamlessly into laboratory environments. With its advanced automation, exceptional precision, and versatile capabilities, the IKA C 3000 Automated Calorimeter Package 1/12 is the perfect solution for laboratories focused on quality and efficiency. INCLUDED: The IKA C 3000 Automated Calorimeter Package 1/12 includes: - C 3000 Measuring Cell - C 6012 Decomposition Vessel, Halogen Resistant - RC 2 Basic Recirculation Chiller - Wear Parts and Consumables for Up to 500 Tests - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA C 6000 Package 1/10 Calorimeter global standards Measuring Range Max. 40000 J Reproducibility Dy (more)namic (1g Benzoic Acid NBS39i) 0.15% Reproducibility Isoperibol (1g Benzoic Acid NBS39i) 0.05% Features - Automatic ignition and ignition energy determination - Automatic water filling and draining - Automatic oxygen filling, venting and flushing - RFID technology for automatic decomposition vessel identification - New design of the decomposition vessel allowing easier and faster sample preparation - Easy and convenient capacitive touch screen operation - Control chart view and correction calculation of globally used standards - Ethernet interface to connect a network printer - USB interface allowing easy data management and software updates The IKA C 6000 Package 1/10 Calorimeter redefines modern calorimetry with advanced automation, cutting-edge design, and precision engineering. Operating across adiabatic, isoperibolic, and dynamic modes, it ensures unparalleled flexibility for diverse laboratory needs. With the ability to select three starting temperatures (22°C, 25°C, 30°C), this instrument complies with global standards, including DIN, ISO, ASTM, GOST, and GB. The redesigned decomposition vessel streamlines sample preparation and reduces measurement times, while the capacitive touchscreen interface enhances usability, allowing intuitive operation and fast navigation. This state-of-the-art calorimeter integrates seamlessly into any laboratory workflow with multiple interfaces, including Ethernet, USB, RS232, and RFID technology for automatic vessel identification. The control chart feature and calorific value correction calculations ensure compliance with globally applicable standards, providing reliable, repeatable results. Features like automatic ignition, water filling, oxygen filling, and degasification, coupled with the innovative inverted crucible holder, simplify the most complex processes. Enhanced data management is made possible through USB connectivity and Ethernet interface for network printer integration. Designed for high sample throughput and strict adherence to standards, the C 6000 Package 1/10 includes the RC 2 Basic Circulating Chiller, further optimizing performance and ensuring precise temperature control. Its robust design, featuring a spherically shaped decomposition vessel, improves heat transfer and measurement efficiency. Whether for research, industrial, or educational purposes, the IKA C 6000 Package 1/10 delivers unmatched accuracy, adaptability, and automation, making it an essential tool for modern calorimetry. INCLUDED: The IKA C 6000 Package 1/10 Calorimeter global standards includes: - C 6010 Decomposition Vessel, Standard - RC 2 Basic Recirculation Chiller - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA C 6000 Automated Calorimeter Global Standards Package 2/12 Measuring Range Max. 40000 J Reproduc (more)ibility Dynamic (1g Benzoic Acid NBS39i) 0.15% Reproducibility Isoperibol (1g Benzoic Acid NBS39i) 0.05% Features - Automatic ignition and ignition determination - Automatic water filling and draining - Automatic oxygen filling, venting and flushing - RFID technology for automatic decomposition vessel identification - New design of the decomposition vessel allowing easier and faster sample preparation - Easy and convenient capacitive touch screen operation - Control chart view and correction calculation of globally used standards - Ethernet interface to connect a network printer - USB interface allowing easy data management and software updates - This Package 2/12 includes a halogen resistant decomposition vessel C 6012 with catalytically active surface leading to higher recovery rates on halogens and sulfur The IKA C 6000 Automated Calorimeter Global Standards Package 2/12 sets a new benchmark in precision and efficiency for modern calorimetry. This advanced system operates seamlessly across adiabatic, isoperibolic, and dynamic measuring modes, offering flexibility to suit diverse laboratory requirements. Users can select from three starting temperatures (22°C, 25°C, 30°C) to optimize measurements, all while adhering to globally recognized standards such as DIN, ISO, ASTM, and GB. Featuring a redesigned decomposition vessel, this package enhances sample preparation efficiency and recovery rates for halogens and sulfur, thanks to its catalytically active, halogen-resistant surface. Please note that while this system is compatible with the RC 2 Basic Chiller for optimal cooling performance, the chiller is not included with this package. Streamlined automation defines the C 6000, incorporating automatic ignition, oxygen filling, and water handling for effortless operation. The capacitive touchscreen ensures intuitive navigation, while the built-in RFID technology provides automatic identification of decomposition vessels for enhanced accuracy. With robust data management capabilities via Ethernet, USB, and RS232 interfaces, this calorimeter simplifies integration into existing workflows and supports comprehensive analysis. The included control chart view and correction calculation features further reinforce compliance with globally applied standards. This Package 2/12 includes the halogen-resistant decomposition vessel C 6012, making it ideal for laboratories demanding high precision in sulfur and halogen analysis. Compact and efficient, with dimensions of 19.7 x 16.7 x 17.7 inches and a weight of 88.5 lbs, the IKA C 6000 ensures optimal performance within a permissible temperature range of 20°C to 30°C. Whether for research, industrial, or quality control applications, this package delivers the reliability and adaptability necessary for advanced calorimetry. INCLUDED: The IKA C 6000 Automated Calorimeter Global Standards Package 2/12 includes: - C 6012 Decomposition Vessel, Halogen Resistant - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA C 6040 Calwin Calorimeter Software The IKA C 6040 Calwin Calorimeter Software is an advanced PC- (more)based solution designed to streamline data management and control across multiple calorimeters. Compatible with IKA models such as the C 6000 global standards, C 6000 isoperibol, C 1, C 200 (Firmware 2.0), C 5000 (Firmware 2.22), and C 2000 (Firmware 2.22), this software provides seamless integration and enhanced functionality. It allows efficient storage, evaluation, and transfer of large datasets directly to laboratory information management systems (LIMS), ensuring compliance with rigorous data management standards. With its intuitive interface, the software offers a clear display of all measurements, results, and connected calorimeters. Features include printing and storage of calibration logs with a control chart view, advanced library and grouping functions with enhanced data filtering options, and correction calculations to determine lower heating values in compliance with ISO, ASTM, DIN, GB, GOST, and other standards. Data can be effortlessly exported into Excel worksheets or csv (ASCII code) files for further analysis, providing versatility and flexibility for laboratory workflows. Designed for use with Windows Vista, 7, 8, 10, and 11, the IKA C 6040 Calwin ensures broad compatibility and ease of use. Weighing just 0.45 kg, it is a lightweight yet powerful tool for modern laboratory environments, offering comprehensive data management and precise calorimeter control. INCLUDED: The IKA C 6040 Calwin Calorimeter Software includes: - DVD with Software and PDF Instructions for Installation - 0003036000 C 5041.10 PC - calorimeter RS 232 connecting cable (3 m) - 0004589500 RS 232 - USB adapter - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Huber Pilot One Ministat 230 Refrigerated Heating Bath Circulator This was removed from a universit (more)y lab where it was surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

This Bright Microtome 5040 Laboratory Cryostat was removed from a university lab where it was surplu (more)s to requirements. The unit powers up and the light works. It has been tested with a digital thermometer (not included). It was set to -35˚C. We ran for it for 6 hours and Quick Freezer Temperature got to -35˚c, Specimen Temperature got to -14˚c and the chamber Temperature got to -15˚c.

Gilson PIPETMAN G Multichannel P12x200G, 20-200 uL Pipette Designed PIPETMAN G brings a new level of (more) comfort into the Gilson range, with a redesigned piston mechanism that reduces the force needed to aspirate and dispense liquids. PIPETMAN G maintains the trusted durability, accuracy, and reliability of the original PIPETMAN pipettes with comfort. Pipetting ComfortPIPETMAN G offers one of the lowest pipetting forces commercially available. With a redesigned piston assembly system and high quality piston grease, PIPETMAN G guarantees hours of comfortable pipetting.Reliable ResultsPIPETMAN G relies on the legendary accuracy, precision, and reliability of PIPETMAN with improved pipetting comfort. Built-to-Last and ConvenientMade of PVDF and stainless steel, the PIPETMAN G offers premium durability. The PIPETMAN G clip ejector allows for convenient access to serviceable parts. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN G Multichannel P12x200G, 20-200 uL Pipette includes: - Operator's Guide - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Yamato CF-303Y Cooling Water Circulator 3.9L, 115V Operating Ambient Temp. Range 5 to 35°C Max. Flo (more)w Rate 10L/min. Refrigerant R452A Features - User-friendly controller with high visibility and improved operability. Possible to switch between measured temperature and set temperature - Convenient circulation pathway connection is completed by inserting a hard tube with 10 mm OD or flexible hose with 9mm ID. Connector can be freely moved and be set in the desired direction - Easy drainage of condensate water via a drain port near the connector on the upper rear of the unit - Easy to clean intake filter located on the front of the unit can be removed when cleaning - Space-saving solvent recovery device stored in the main body as secondary trap (option for CF802A) A powerful 3.9L closed circulation system with excellent cooling capacity designed to work with laboratory equipment such as rotary evaporators. Easy maintenance of air intake filter. Rotatable connector which can freely be moved and be set in the desired orientation. Convenient drainage of waste water. Compact and space-saving to fit on laboratory tables and limited space. Temp. range: -20°C ~ 30°C. INCLUDED: The Yamato CF-303Y Cooling Water Circulator 3.9L, 115V includes: - Condensation drain hose - Hose clamp (2) - Hose nozzle (for flexible hose connection(2) - spare fuse for service outlet 2A (1) for CF802A - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

HX7 scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68)  (more)mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.