Sartorius Stedim BioWelder ReeWelder 3 Tubing Welder Holder OD SH1 5/8" 15,9mm

Arpege 55 Liquid Nitrogen Canister This was removed from a university lab where it was surplus to re (more)quirements. The unit is in good cosmetic condition, with minor marks from use. It features 5 x Racks.

Powerbank ZR-04 is used for rechargeable power supply for balances and scale accessories. It uses fa (more)st charging technology. It allows long operating time without recharging and, thanks to the “Low Power” function, powering devices with low power consumption. The ZR-04 powerbank is made of high-quality components that ensure reliable operation. A display indicating the state of charge enhances ergonomics. Powerbank ZR-04 meets airline standards, which means that it can be carried on board an airplane as hand luggage. The device can simultaneously power the balance/ scale and charge the internal battery. The average power time of the balance/ scale is, depending on the product series, from 8 to as much as 24 hours.

The screen of the 5Y and CY10 terminal is made of glass – a material prone to scratches and cr (more)acks. It can easily be dropped or damaged by transport, so it is worth ensuring that it is properly protected. Safety in Every Inch Hybrid glass protects the touch panel of the ELLIPSIS and CY10 series devices terminal from scratches and cracks. It combines the advantages of glass and film: resistance and flexibility. It is perfectly matched to the balances’s display, so it provides the highest level of security to every inch of the screen. Antistatic Properties The Hybrid Protective Glass is not only scratch and impact resistant, but also antistatic. Thanks to its antistatic properties, the Hybrid Protective Glass prevents dust particles drawn by static electricity from sticking to the surface of the screen. Instant Responsiveness The hybrid protective glass allows instant response to touch. It does not affect the user experience of the terminal – it does not limit the sensitivity of the screen, does not reduce viewing angles and does not distort colors. Hybrid Protective Glass at a Glance: very thin – ~0.3 mm perfectly smooth durable – strengthens the screen by up to 250% scratch-resistant – glass hardness of 7H The Set Includes: hybrid protective glass leave that removes pollen from under the already applied glass positioning sticker to help fit the glass to the screen cardboard to eliminate air bubbles cleaning kit (moistened cloth and non-dusting cloth) You can buy and install the hybrid protective glass at any time. Installation is very easy and takes a while.

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Ultra-Microbalance UYA The UYA Ultra-Microbalance is designed to meet the demanding requirements for high-precision mass measurement. Each ultra-microbalance has an automatic adjustment that records temperature changes and eliminates indication deviations that result from an unstable working environment. As a result, automatic adjustment improves measurement readability. The ultra-microbalance consists of two components located in separate housings: a weighing terminal and a precision mechanical measuring system. The two-element design of the ultra-microbalance eliminates the risk of temperature changes and mutual vibration transmission. Essential equipment for ultra-micro scales Standard equipment of the ultra-microbalance is an anti-draft chamber, which reduces the influence of air movements and air drafts in weighing rooms on measurement results. The ultra-microbalance is placed inside the chamber, and slidable side doors provide unbounded access to the weighing chamber. All components of the balance are made of glass or aluminum, which eliminates the influence of electrostatic fields. NOTE: for the correct implementation of the weighing process with ultra-microbalances, the following are required: a properly prepared workspace and proper operation of the balance. It is recommended to use antivibration tables with a granite stabilizing plate for ultra-microbalances. Functionality of the ELLIPSIS series: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. * RFID ISO/IEC 14443 Type A, 13.56 MHz

MY11 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the MYA microbalance. Set content: weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Vessel capacity: 11 ml Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Applied Biosystems Model: 9800 Fast Thermal Cycler PCR System P/N: 4349441 S/N: 298000 (more)818; 298010874 YoM: 12.2005 Description: The 9800 Fast PCR System is the first integrated system optimized for trouble-free fast PCR performance. Applied Biosystems is the most trusted name in PCR. This PCR System is the first fully-integrated fast PCR solution designed to significantly shorten your time-toresult. The 9800 Fast PCR System reduces PCR reaction time from 2 hours to 25 minutes or less, getting you on to the next step of your research more quickly than ever before. The system is optimal for service labs looking for faster turnaround times, or for researchers sharing a single system where time-savings can be especially beneficial. The 9800 Fast PCR System is ideal for speeding up the PCR process. Based on the proven engineering of the GeneAmp PCR System 9700, the 9800 Fast Thermal Cycler is designed to considerably reduce PCR reaction time. Often, 500 bp fragments can be amplified from a genomic DNA background in 25 minutes. With faster amplifications, you still achieve the same level of performance and reproducibility that make Applied Biosystems instruments the standard for reliable thermal cycling. In addition, the system includes a Standard Mode for traditional protocols. The 96-Well Fast Thermal Cycling Plate is an integral component of the 9800 Fast PCR System. The plate has been optimized for 20 µL fast PCR reactions and is designed to fit with the 9800 system sample block. Features: Unmatched speed and performance:- PCR reaction times from 2 hours to 25 minutes or less- Superior reproducibility with uniform heating and cooling- Specificity and sensitivity with hot start chemistryOptimized for convenience:- Integrated 96-well system designed for fast results- Convenient master mix delivers consistent performance- Superior quality 96-well plates optimized for fast PCRResults you can count on:- Extending the family of proven PCR solutions- Authorized Thermal Cycler for PCR- Fast and Standard Modes to address your current and future PCR needs Specifications: Applied Biosystems 9800 Fast Thermal Cycler:- Format: 96-well- Thermal Non-Uniformity:(95ºC, 10 seconds after clock start): < 0.5ºC(55ºC, 10 seconds after clock start): < 0.5ºC- Block Temperature Accuracy: ± 0.25ºC, over the temperature range 35–100ºC- Temperature Range: 4.0–99.9°C- Ramp Speeds: Heating: 5.0°C/secondsCooling: 4.1°C/seconds- Choice of Ramp Modes: Fast and Standard Mode- Sample Temperature Control- Cycle Speed: < 10 minutes to uniformity cycle samples from 94°C, 0 seconds to 64°C, 0 seconds, 25 times- Power: 240 VAC 50-60 Hz 850 VA- Dimensions (H x W x D): 26 x 30 x 52 cm - Weight: 12 kg 96-Well Fast Thermal Cycling Plate:- Format: 96-well SBS standard- PCR Volume Range: 20 µL (recommended) Min./Max. 10-30 µL- Total Well Liquid Capacity: 100 µL (max.) Items delivered: - Applied Biosystems 9800 Fast Thermal Cycler PCR System- Instruction Manual as PDF via E-Mail request Condition: This PCR system is in very good cosmetic as well as operating condition. It is 100% functional tested and ready to be used.

F2 Mass Standard - knob weights with adjustment chamber. Nominal value - 20 g.

KNF IP65 UFEM 1.10 KT.18S2 Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to sui (more)t most laboratory liquid metering and dosing needs. The UFEM 1.10 KT.18S2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1– 999 mL. It is constructed with the following chemically-resistant flow path materials: PP head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 UFEM 1.10 KT.18S2 Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hermle Z446 Centrifuge w/ Microplate Rotor The Z446 universal centrifuge series offers the highest c (more)apacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,500 x g with full loads of up to 28 x 50ml or 68 x 15ml tubes. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z446 Centrifuge w/ Microplate Rotor includes: - Z446-750-AC 4 x 750ml Swing Out Rotor - Z446-750-MP Microplate Carriers (Set of 4) - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty