Radwag Tweezers 300 mm for mass standards up to 500 g

The dusting brush for mass standards is an essential tool for anyone working with mass standards in  (more)metrology, chemical and other laboratories. Designed to maintain the highest standards of accuracy and hygiene, allows efficient yet safe removal of contaminants from the surface of the mass standard. Dusting Brush for Mass Standards by RADWAG – Features Dimensions Diameter: 30 mm, length: 150 mm. Precision bristles Soft and synthetic bristles do not scratch the surface of the mass standard, and as a result, do not interfere with its accuracy. Ergonomic handle The handle of the brush is adapted to the hand of the user, who can thus operate it precisely and comfortably even for many hours. Antistatic properties The brush reduces the risk of attracting dust and fine dirt. This is crucial when working with a mass standard of high accuracy class. Easy to clean Easy cleaning and maintenance of the brush translates into the ability to use it for a long time. Why Choose a Dusting Brush for Mass Standards? Highest quality workmanship Our brush is designed for demanding laboratory conditions. Trust of experts It is recommended by professionals in the field of metrology and calibration. Mass standard durability The fine bristles and anti-static properties of the brush ensure that the mass standards cleaned with it remain durable and thus do not lose their accuracy.

The dusting brush for mass standards is an essential tool for anyone working with mass standards in  (more)metrology, chemical and other laboratories. Designed to maintain the highest standards of accuracy and hygiene, allows efficient yet safe removal of contaminants from the surface of the mass standard. Dusting Brush for Mass Standards by RADWAG – Features Dimensions Diameter: 20 mm, length: 110 mm. Precision bristles Soft and synthetic bristles do not scratch the surface of the mass standard, and as a result, do not interfere with its accuracy. Ergonomic handle The handle of the brush is adapted to the hand of the user, who can thus operate it precisely and comfortably even for many hours. Antistatic properties The brush reduces the risk of attracting dust and fine dirt. This is crucial when working with a mass standard of high accuracy class. Easy to clean Easy cleaning and maintenance of the brush translates into the ability to use it for a long time. Why Choose a Dusting Brush for Mass Standards? Highest quality workmanship Our brush is designed for demanding laboratory conditions. Trust of experts It is recommended by professionals in the field of metrology and calibration. Mass standard durability The fine bristles and anti-static properties of the brush ensure that the mass standards cleaned with it remain durable and thus do not lose their accuracy.

Convenient Transportation of Small Mass Standards The mass standards tweezers are tongs/ pliers that (more) will enable you to conveniently and precisely grasp and transport small mass standards. With it, you can easily and quickly place or lay an object (for example, a mass standard) on the pan and remove it from the pan. The tweezers protect the mass standards from finger grease, moisture and other factors that interfere with the measurement. It is indispensable in the daily use of laboratory balances. Tweezers 300 mm Material: stainless steel with a silicone tip for standards up to 500 g What Kind of Tweezers for Mass Standards? TWEEZERS LENGHT APPLICATION Standard 105 mm up to 50 g 160 mm up to 200 g 250 mm up to 500 g 300 mm up to 500 g Made of carbon fiber 105 mm up to 50 g With a carbon fiber tip 105 mm up to 50 g 155 mm up to 200 g 185 mm up to 200 g 200 mm up to 200 g

Convenient Transportation of Small Mass Standards The mass standards tweezers are tongs/ pliers that (more) will enable you to conveniently and precisely grasp and transport small mass standards. With it, you can easily and quickly place or lay an object (for example, a mass standard) on the pan and remove it from the pan. The tweezers protect the mass standards from finger grease, moisture and other factors that interfere with the measurement. It is indispensable in the daily use of laboratory balances. Tweezers 160 mm Material: stainless steel with a silicone tip for standards up to 200 g What Kind of Tweezers for Mass Standards? TWEEZERS LENGHT APPLICATION Standard 105 mm up to 50 g 160 mm up to 200 g 250 mm up to 500 g 300 mm up to 500 g Made of carbon fiber 105 mm up to 50 g With a carbon fiber tip 105 mm up to 50 g 155 mm up to 200 g 185 mm up to 200 g 200 mm up to 200 g

Convenient Transportation of Small Mass Standards The mass standards tweezers are tongs/ pliers that (more) will enable you to conveniently and precisely grasp and transport small mass standards. With it, you can easily and quickly place or lay an object (for example, a mass standard) on the pan and remove it from the pan. The tweezers protect the mass standards from finger grease, moisture and other factors that interfere with the measurement. It is indispensable in the daily use of laboratory balances. Tweezers 200 mm Material: stainless steel with a carbon fiber tip for standards up to 200 g What Kind of Tweezers for Mass Standards? TWEEZERS LENGHT APPLICATION Standard 105 mm up to 50 g 160 mm up to 200 g 250 mm up to 500 g 300 mm up to 500 g Made of carbon fiber 105 mm up to 50 g With a carbon fiber tip 105 mm up to 50 g 155 mm up to 200 g 185 mm up to 200 g 200 mm up to 200 g

Convenient Transportation of Small Mass Standards The mass standards tweezers are tongs/ pliers that (more) will enable you to conveniently and precisely grasp and transport small mass standards. With it, you can easily and quickly place or lay an object (for example, a mass standard) on the pan and remove it from the pan. The tweezers protect the mass standards from finger grease, moisture and other factors that interfere with the measurement. It is indispensable in the daily use of laboratory balances. Tweezers 155 mm Material: stainless steel with a carbon fiber tip for standards up to 200 g What Kind of Tweezers for Mass Standards? TWEEZERS LENGHT APPLICATION Standard 105 mm up to 50 g 160 mm up to 200 g 250 mm up to 500 g 300 mm up to 500 g Made of carbon fiber 105 mm up to 50 g With a carbon fiber tip 105 mm up to 50 g 155 mm up to 200 g 185 mm up to 200 g 200 mm up to 200 g

Edwards Auto 306 Thermal Evaporator Coating System This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up but displays the following error; 'Backing Error'Meaning: The backing pressure is above the pressure in pressure store 5.Action: Check that the store is correctly set (refer to Volume 2); if so, check for a leak in the system. It is in good cosmetic condition with marks from use. Included with it are; Edwards RV8 PumpSerial#: 972124615 Edwards Oil Mist Filter EMF10Code#: A462 26 000 Edwards PV25EKASerial#: 974118903 Additional items included: Auto 306 Vacuum Coater Installation and Operation Manual. x 12Various FusesVarious Screws & FixingsVarious BracketsSpanner x 2Edwards Vacuum Coater InstructionsEdwards Vacuum Coater Accessories InstructionsInstructions Manual R.F Generator Model SG-1250 Photos provided of all listed above.

The HRP 5Y.KO series of mass comparators enables calibrating mass standards and weights in accordanc (more)e with OIML Recommendation (R-111) for class F2 and lower classes. Comparators are used to ensure consistency in mass measurements as well as to verify weights according to legal metrology requirements. RADWAG mass comparators have been recognized by calibration laboratories in many countries. The HRP 5Y.KO mass comparators consist of two elements: a professional weighing platform (modern design of an electromagnetic mechanism in a hermetic steel casing) and 5Y terminal. The weighing platform is made of steel and features marks facilitating centric loading of mass standards. The comparator can be equipped with a self-centring weighing pan (extra charge), which significantly minimises the influence of eccentricity during measurements. The self-centring weighing pan eliminates the error of placing the weight "out of pan centre". This solution also enables calibrating weights of different shapes and dimensions without the need to set the positioners for central loading of the mass standard each time. The comparator has a user-friendly menu. Data security and work results archiving are ensured by RADWAG terminal software.

Ohaus EX125 Explorer Semi-Micro Analytical Balance The OHAUS EX125 Explorer semi-micro balance has b (more)een designed with the technology to ensure that your very specific weighing results are accurate. Sophisticated laboratories requiring accuracy and looking for innovative technology to obtain measurement results can find both in Explorer semi-micro balances. It has a max weight capacity of up to 120 grams, and a readability of 0.01 mg. Internal CalibrationOHAUS' signature AutoCal internal calibration system provides routine maintenance by automatically calibrating the balance every time it senses a temperature change of 1.5°C or every 3 hours, whichever occurs first. This helps ensure the accuracy of the balance when the operator has not performed a manual calibration or when the proper calibration masses are unavailable. In addition, to minimize weighing errors and ensure accurate measurements, AutoCal utilizes two internal weights to perform a linear calibration. Intuitive Software Provides an Extremely Modern User Experience The EX125 includes many facets of modern technology to provide the best weighing experience possible. The icon-based navigation provides tactile feedback and operates in the same manner as a smart phone or tablet computer. The EX125 Explorer semi-micro balance has been designed and constructed to provide a modern weighing experience as well as to bolster accuracy. Click Here to View Product Video INCLUDED: The Ohaus EX125 Explorer Semi-Micro Analytical Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Motic AE2000 LED Trinocular Inverted Microscope w/ Moticam BMH4000X Microscope Camera Objectives CCI (more)S® Plan Achromatic, DIN 4X, PH10X Fine Focus Precision Color Corrected Infinity Optical System (CCIS®) Transmitted Illumination (FPS) Quartz Halogen 6V/30W with Intensity Control Features - Color Corrected Infinity Optical System (CCIS®) for excellent image quality - Iris diaphragm for precise light control - Sturdy stage with metal and glass inserts for stable sample placement - Supports brightfield and phase contrast with a phase slider - Inverted stand suitable for routine microbiology and cell cultures - 8MP sensor for detailed and clear images - Features auto/manual exposure, white balance, saturation, contrast, and more

Labconco CentriVap Cold Trap Brushed, Stainless Steel and Powder-Coated Steel Exterior Illuminat (more)ed Temperature Graph with Endpoint Indication (Operating temperature of -40° C) HCFC-Free Refrigerant System 1/3 hp Compressor (Reaches -50C in less than 30 min.) 4-liter, Stainless Steel Collector Acrylic or Stainless Steel Lid (with 2 Quick-Disconnect fittings for connection to a CentriVap Concentrator) Stainless Steel Drain Port (with corrosion-resistant, nylon valve) INCLUDED: The Labconco 7811020 CentriVap Cold Trap, 115V, 60Hz includes: - Tubing - Clamps x 2 - Wire Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA R 3004.2 Blade stirrer Maximum Speed ≤ 1000 rpm Flow Type Radial Material Stainless Steel Featur (more)es - Generates radial flow for effective top and bottom mixing - Ideal for aerating low viscosity media and homogenizing solids in liquids - Suitable for medium to high-speed mixing tasks - Constructed from AISI 316L / 1.4571 stainless steel for long-lasting durability - Operates effectively within an ambient temperature range of 5 - 40 °C The R 3004.2 Blade Stirrer is designed to create a radial flow, adeptly mixing materials from both the top and bottom, making it exceptionally suited for aerating low viscosity media and homogenizing solids in liquids. With a significant 70 mm stirrer diameter and an 819 mm shaft length, this tool is perfect for reaching into deep vessels and ensuring thorough mixing across a variety of applications. Constructed from AISI 316L / 1.4571 stainless steel, it stands as a durable and reliable choice for any laboratory setting.INCLUDED: The IKA R 3004.2 Blade stirrer includes: - IKA R 3004.2 Blade stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty