Radwag 105 mm tweezers with carbon fiber tip for mass standards up to 50 g

Convenient Transportation of Small Mass Standards The mass standards tweezers are tongs/ pliers that (more) will enable you to conveniently and precisely grasp and transport small mass standards. With it, you can easily and quickly place or lay an object (for example, a mass standard) on the pan and remove it from the pan. The tweezers protect the mass standards from finger grease, moisture and other factors that interfere with the measurement. It is indispensable in the daily use of laboratory balances. Tweezers 105 mm Material: carbon fiber for standards up to 50 g What Kind of Tweezers for Mass Standards? TWEEZERS LENGHT APPLICATION Standard 105 mm up to 50 g 160 mm up to 200 g 250 mm up to 500 g 300 mm up to 500 g Made of carbon fiber 105 mm up to 50 g With a carbon fiber tip 105 mm up to 50 g 155 mm up to 200 g 185 mm up to 200 g 200 mm up to 200 g

Convenient Transportation of Small Mass Standards The mass standards tweezers are tongs/ pliers that (more) will enable you to conveniently and precisely grasp and transport small mass standards. With it, you can easily and quickly place or lay an object (for example, a mass standard) on the pan and remove it from the pan. The tweezers protect the mass standards from finger grease, moisture and other factors that interfere with the measurement. It is indispensable in the daily use of laboratory balances. Tweezers 155 mm Material: stainless steel with a carbon fiber tip for standards up to 200 g What Kind of Tweezers for Mass Standards? TWEEZERS LENGHT APPLICATION Standard 105 mm up to 50 g 160 mm up to 200 g 250 mm up to 500 g 300 mm up to 500 g Made of carbon fiber 105 mm up to 50 g With a carbon fiber tip 105 mm up to 50 g 155 mm up to 200 g 185 mm up to 200 g 200 mm up to 200 g

Convenient Transportation of Small Mass Standards The mass standards tweezers are tongs/ pliers that (more) will enable you to conveniently and precisely grasp and transport small mass standards. With it, you can easily and quickly place or lay an object (for example, a mass standard) on the pan and remove it from the pan. The tweezers protect the mass standards from finger grease, moisture and other factors that interfere with the measurement. It is indispensable in the daily use of laboratory balances. Tweezers 200 mm Material: stainless steel with a carbon fiber tip for standards up to 200 g What Kind of Tweezers for Mass Standards? TWEEZERS LENGHT APPLICATION Standard 105 mm up to 50 g 160 mm up to 200 g 250 mm up to 500 g 300 mm up to 500 g Made of carbon fiber 105 mm up to 50 g With a carbon fiber tip 105 mm up to 50 g 155 mm up to 200 g 185 mm up to 200 g 200 mm up to 200 g

Convenient Transportation of Small Mass Standards The mass standards tweezers are tongs/ pliers that (more) will enable you to conveniently and precisely grasp and transport small mass standards. With it, you can easily and quickly place or lay an object (for example, a mass standard) on the pan and remove it from the pan. The tweezers protect the mass standards from finger grease, moisture and other factors that interfere with the measurement. It is indispensable in the daily use of laboratory balances. Tweezers 160 mm Material: stainless steel with a silicone tip for standards up to 200 g What Kind of Tweezers for Mass Standards? TWEEZERS LENGHT APPLICATION Standard 105 mm up to 50 g 160 mm up to 200 g 250 mm up to 500 g 300 mm up to 500 g Made of carbon fiber 105 mm up to 50 g With a carbon fiber tip 105 mm up to 50 g 155 mm up to 200 g 185 mm up to 200 g 200 mm up to 200 g

The dusting brush for mass standards is an essential tool for anyone working with mass standards in  (more)metrology, chemical and other laboratories. Designed to maintain the highest standards of accuracy and hygiene, allows efficient yet safe removal of contaminants from the surface of the mass standard. Dusting Brush for Mass Standards by RADWAG – Features Dimensions Diameter: 20 mm, length: 110 mm. Precision bristles Soft and synthetic bristles do not scratch the surface of the mass standard, and as a result, do not interfere with its accuracy. Ergonomic handle The handle of the brush is adapted to the hand of the user, who can thus operate it precisely and comfortably even for many hours. Antistatic properties The brush reduces the risk of attracting dust and fine dirt. This is crucial when working with a mass standard of high accuracy class. Easy to clean Easy cleaning and maintenance of the brush translates into the ability to use it for a long time. Why Choose a Dusting Brush for Mass Standards? Highest quality workmanship Our brush is designed for demanding laboratory conditions. Trust of experts It is recommended by professionals in the field of metrology and calibration. Mass standard durability The fine bristles and anti-static properties of the brush ensure that the mass standards cleaned with it remain durable and thus do not lose their accuracy.

The dusting brush for mass standards is an essential tool for anyone working with mass standards in  (more)metrology, chemical and other laboratories. Designed to maintain the highest standards of accuracy and hygiene, allows efficient yet safe removal of contaminants from the surface of the mass standard. Dusting Brush for Mass Standards by RADWAG – Features Dimensions Diameter: 30 mm, length: 250 mm. Precision bristles Soft and synthetic bristles do not scratch the surface of the mass standard, and as a result, do not interfere with its accuracy. Ergonomic handle The handle of the brush is adapted to the hand of the user, who can thus operate it precisely and comfortably even for many hours. Antistatic properties The brush reduces the risk of attracting dust and fine dirt. This is crucial when working with a mass standard of high accuracy class. Easy to clean Easy cleaning and maintenance of the brush translates into the ability to use it for a long time. Why Choose a Dusting Brush for Mass Standards? Highest quality workmanship Our brush is designed for demanding laboratory conditions. Trust of experts It is recommended by professionals in the field of metrology and calibration. Mass standard durability The fine bristles and anti-static properties of the brush ensure that the mass standards cleaned with it remain durable and thus do not lose their accuracy.

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

This CIF Automatic Silent Compressor SA 15 was removed from a university lab where it was surplus to (more) requirements. The unit has been professionally serviced and is in full working order. It cycles in and out correctly. It is in reasonably good cosmetic condition but the pressure gauge is missing its plastic window.

Memmert UF260plus Forced Circulation Oven 256L, 115V Working Temperature Range Min. 10°C above ambi (more)ent up to +300°C Oven Type Forced Air Circulation Chamber Volume 256 L (9.04 cu.ft.) Features - Working temperature range from Min 10°C above ambient up to +300°C, with a high-resolution display - Volume of 256 L (9.04 cu.ft.), offering ample space for various applications - TwinDISPLAY with multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Comprehensive safety mechanisms including overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB - Function SetpointWAIT ensures processing only begins once the target temperature is reached - AtmoCONTROL software on a USB stick allows for advanced programming, management, and data transfer via Ethernet or USB port - AutoSAFETY features integrated over- and undertemperature monitoring "ASF", automatically adjusting and providing alarms for any temperature deviations - Stainless steel interior with deep drawn ribbing and integrated heating on four sides, designed for easy cleaning and durability The Memmert UF260plus Forced Circulation Oven 256L, 115V provides a large working chamber with a capacity of 256L (9.04 cu.ft.), making it ideal for a wide range of applications that require precise thermal processing. With a working temperature range from 10°C above ambient up to +300°C, and high-resolution displays for monitoring, this oven ensures accuracy and flexibility in temperature settings. Equipped with the advanced TwinDISPLAY system, featuring dual high-definition TFT-color displays and a multifunctional PID-microprocessor controller, users can easily control parameters such as fan speed, air flap position, and program time. The Function SetpointWAIT ensures that the process only begins once the desired temperature is reached, enhancing operational efficiency. Safety is a top priority in the UF260plus, with features like an overtemperature monitor (TWW), adjustable temperature limiter (TWB), and a mechanical temperature limiter (TB), all designed to prevent overheating. The AutoSAFETY system includes integrated over- and undertemperature monitoring "ASF," which adjusts automatically and provides alarms in case of temperature deviations. This oven's stainless steel interior, reinforced with deep-drawn ribbing and integrated heating on four sides, ensures even heat distribution and easy cleaning. Advanced AtmoCONTROL software allows for seamless programming and data management via USB or Ethernet, making the UF260plus an excellent choice for professionals requiring reliability and precision in thermal processing. INCLUDED: TheMemmert UF260plus Forced Circulation Oven 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The X-CLARITY Tissue Clearing System is an all-in-one, easy-to-use solution for electrophoretic tiss (more)ue clearing. Its unique design accelerates the removal of lipids from tissues while preserving the structural integrity of the sample. In ETC (electrophoretic tissue clearing) mode, platinum-plated electrodes generate an electric field to accelerate the removal of lipids from tissues in a highly effcient manner. A temperature control system actively cools and heats buffer to maintain consistent buffer temperatures during clearing. Buffer is constantly circulated to ensure consistent buffering capacity, temperature control, and elimination of tissue clearing byproducts. This advanced system ensures effcient, rapid, and consistent tissue clearing. Voltage: Not adjustable, max 60 V Current: 0.2 – 1.5 A, 0.1 A increments Temperature: 35 – 60°C, 1°C increments Switching time: 0 – 600 min, 10 min increments Pump speed range: 0.1 – 100 rpm, 0.1 rpm increments

Small sample volume from 50ml -120ml. Continuously variable single shaft pump and stirrer with digit (more)al readout. Manual fill, drain and cleaning. Chemically compatible as standard. Particle size:Up to 600µm – sample dependent Stirrer speed: 350 – 3,500rpm Dimentions: 140mm x 175mm x 390mm Weight: 6.75kg 100-240V / 50-60Hz / 20W

Beam scales C315.4P2 series is stable and proved four load cells weighing solution with more versati (more)le application than standard pallet scales. The adjustable distance between the beams (up to 5 meters) enables fitting the C315.4P2 scales to different loads (cases, long bars, heavy sections). The load to be weighed can be placed on the beams by a standard fork-lift truck. Beam scales C315.4P2 series is manufactured in mild steel powder coated version. Optionally, the number of beams in a scale can be increased to 4. Beam scales features handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE C315 series featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.