Radwag RES Radwag Extended SI Module (WLY / PUE 7.1)

KERN T572-39-A laboratory balance 4200g - 0.01g Model: 572-39 Scale used only a few times, new condi (more)tion. Year of manufacture: 2023 With its original packaging Technical parameters: Readability: 0.01 g Linearity: ± 0.05 g Maximum capacity: 4200g (4.2kg) Tray dimension: Ø 15 cm Dimensions (L x D x H): 225 x 315 x 100 mm Weight: 2.3Kg Material tested

F2 Mass Standard - knob weights, service case. Nominal value - 200 kg.

F1 Mass Standard - knob weights, wooden box. Nominal value - 200 kg.

F1 Mass Standard - knob weights without adjustment chamber - set (1 g - 50 g), wooden box Number of  (more)pieces in the set: 8

SYS-1544-2415-T3-HRP power supplier with hermetic connector for HRP, MWSH, MWLH

The MW-01-A mass converter is designed to be a component of an industrial load cell scale. Depending (more) on the needs, communication with the mass converter can be carried out via the following communication interfaces: RS232, RS485, Ethernet, Ethernet IP, Profibus or Profinet. The MW-01-A mass converter is compatible with indicators and PC. Operation of the MW-01-A mass converter via PC is carried out using „MW Manager” software.

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

IKA RW 28 Digital Mechanical Overhead Stirrer Speed Range 60 to 1,400 RPM Viscosity Max. 50,000 mPas (more) Stirring Quantity Max. 80 l Features - Digital speed display - Infinitely adjustable speed from 60 to 1400 rpm in twospeed ranges - Push-through agitator shafts - Overload protection - Error code display - Robust, ergonomic design - Quiet operation - With constant power-drive Powerful, mechanically controlled laboratory stirrerdesigned for highly viscous applications for quantities up to 80 l (H2O). It issuitable for intensive mixing for use in laboratories and pilot plants. Thestirrer comes equipped with a protection for overheating of the motor by meansof self-locking temperature limiter. Additionally, to secure bowls, a stirringshaft protection and clamping fixture are optionally available.

Accuris SmartWasher 96 Microplate Washer, 115VThe Accuris SmartWasher™ 96 automates the process of E (more)LISA plate washing so assays can be prepared quickly, accurately, and with confidence for absorbance reading. It’s the perfect companion to our popular SmartReader™ 96 microplate reader. - Precision control of aspiration needle position - Accurate to 0.1mm - Minimal residual liquid, ≤1μl/well - Auto rinse function eliminates cross contamination - Up to 100 wash protocols can be customized and stored - Liquid level sensors in wash and waste bottles - Wash protocols can be transferred via flash drive Research requires flexibility – the SmartWasher™ 96 provides it. Full plates, partial plates, and strips with U, V, C, or flat bottoms are accepted by this fully automated washer. Multiple aspiration point settings allow for minimal residual liquid in the wells after aspiration. All parameters, including dispense volume, suction time, soak and shake cycles, and shaking speed are easily programmed using the large 4.3” LCD display and keypad. Up to 100 wash protocols can be stored on board the SmartWasher™ 96 and recalled when needed, or transferred between machines with a flash drive. The washer comes equipped with 2 wash bottles, 1 rinse bottle and a waste bottle. All have sensors that alert the user when the solutions are low, or in the case of the waste bottle, when it needs to be emptied. An auto-rinse function primes the dispensing tube and wash heads to prevent cross contamination and clogs. 8- and 12-channel manifolds are available separately to accommodate plates in either orientation. A transparent, acrylic shield surrounds the wash area, allowing for visualization of the plate. Should a spill or leak occur, the beveled spill well ensures that the liquid is extracted immediately to avoid cross-contamination. The SmartWasher™ 96 is the perfect partner for the SmartReader™ 96 Microplate Absorbance Reader as well as other popular readers. 8- and 12-channel manifolds, purchased separately, are available to accommodate different plate orientations. Click Here to View Product Video INCLUDED: The Accuris SmartWasher 96 Microplate Washer includes: - Waste and Buffer Bottles - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty