Thermo Scientific Evolution RC High Speed Centrifuge Zentrifuge / Rotors sold separate!

Eco Chemie BV Metrohm Autolab SPR Biosensor Instrument with Software & Manual This was removed  (more)from a university lab where it was surplus to requirements. The unit powers up but we were unable to test it further. The instrument is supplied with the manual and software. It is in good cosmetic condition with minor marks from use.

Randox RX Monza Clinical Chemical Analyser Lab This item was removed from a university where it was  (more)surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

ELEMENTAR Vario Max analyzer for parts Year of manufacture: 2014 For parts

WTW inoLab Oxi 7310 Benchtop Oximeter With CELLOX 325 Oxygen Probe OD Accuracy: ±0.5% OD Concentrati (more)on: 0.00 - 20.00 / 0 - 90 mg/L Dissolved Oxygen - Saturation: 0.0 - 200.0 / 0 - 600 % (±0.5%) Dissolved Oxygen - Barometric Pressure Range: 0 - 200.0 hPa / 0 - 1250 hPa Temperature Range: 0.0...+50.0 °C Temperature Accuracy: ±0.1 °C Power Supply: Universal power supply, 4×1.5 V AA batteries or 4×1.2 V NiMH rechargeable battery Data Acquisition - Capacity: 500 in manual mode / 5000 in automatic mode In good condition

Labconco 20-Port ManifoldManifoldincludes 20 neoprene valves with molded plastic knobs that accommod (more)ate both1/2" and 3/4" adapters for connection of flasks.Manifolds aremade of type 304 stainless steel and mount atop FreeZone Freeze Dryers. INCLUDED: The Labconco 7522300 20-Port Manifold includes: - Neoprene Valves x 20 (accomodates 1/2" & 3/4" adapters) - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco RapidVap N2 Evaporation SystemChoice of two end-of-run signals: Timed signal: electric time (more)r pauses system, alerts user when set time has elapsed Temperature signal: system monitors temperature difference between sample block and heater caused by evaporative cooling; when evaporation is nearly complete, the two temperatures equalize, causing alarm to sound and PREHEAT/END ALARM light to flash Available with RS-232 Link on rear of unit for two-way communication Ideal for toxicology testing and environmental analysis Speeds evaporation by introducing nitrogen to the sample surface, an efficient alternative to Kuderna-Danish evaporators Improved control panel Easy-to-read LCD display prompts operator to program desired parameters, and displays vortex speed by percentage, actual and set temperatures in C, and total time remaining in minutes. Enter up to nine different protocols into memory for easy repetition of exact test parameters Advanced heating system Contamination- and maintenance-free 1000-watt dry block heating system speeds evaporation rate by supplying a controlled amount of heat from ambient up to 100C Heater and sample block move in tandem for more efficient heat transfer Alarm signals completion of run, allowing samples to be left unattended while evaporating to desired endpoint Efficient operation Brushless DC motor ensures safe, maintenance-free operation and provides smooth, variable-speed power up to 500rpm Produces no potentially dangerous sparks Increased durability Systems may be used with broad range of strong chemicals Powder-coated, aluminum cabinet base with smooth, solvent-resistant acrylic/PVC thermoplastic upper housing Aluminum chamber with PTFE coating conducts heat efficiently and resists corrosion All mechanical components are isolated from chemical fumes and vapors for longer life Chemical-resistant glass lid provides visibility of samples and detaches for cleaning Two clamps hold lid securely in place Phenol-free gasket provides sealing without potential for phenol contamination RapidVap models with optional RS-232 link allow all front panel functions to be performed and monitored from a personal computer (not included) INCLUDED: The Labconco 7910000 RapidVap N2 Evaporation System, 115V, 60Hz includes: - Exhaust Hose - Clamp - Sample Tube Caps x 8 - Heat Transfer Grease - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF260 Forced Circulation Oven 256L, 115V Working Temperature Range Min. 10°C above ambient  (more)up to +300°C Oven Type Forced Air Circulation Chamber Volume 256 L (9.04 cu.ft.) Features - Volume of 256 L (9.04 cu.ft.) - Working temperature range from Min 10°C above ambient up to +300°C with a resolution of 0.1°C up to 99.9°C, and 0.5°C from 100°C - Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Forced air circulation by a quiet air turbine, adjustable in 10% steps, with pre-heated fresh air admixture - Adjustable electronic overtemperature monitor and mechanical temperature limiter for safety - Easy-to-clean stainless steel interior, reinforced with deep drawn ribbing and integrated heating on four sides - AtmoCONTROL software for managing and transferring data via USB or Ethernet interface - Three freely selectable calibration values and digital timer adjustable from 1 minute to 99 days - Fully insulated stainless steel doors with 2-point locking and inner glass doors The Memmert UF260 Forced Circulation Oven 256L, 115V stands as a pinnacle of precision and durability in laboratory ovens. Engineered to maintain a broad setting temperature range from +20 to +300°C and a working temperature range that starts from just 10°C above ambient up to the maximum, this oven meets diverse heating requirements with flawless efficiency. Its high-definition TFT-color display coupled with the ControlCOCKPIT, an adaptive multifunctional digital PID-microprocessor controller, offers unparalleled user control and monitoring, ensuring optimal performance in any lab setting. Safety and usability are at the core of the Memmert UF260 design. It features a robust stainless steel interior that is easy to clean and designed to withstand rigorous use, complete with deep-drawn ribbing and integrated heating on all four sides for uniform temperature distribution. The oven includes a sophisticated air circulation system controlled by a quiet air turbine that can be adjusted in 10% steps, along with a pre-heated fresh air admixture feature. Additionally, comprehensive safety mechanisms, such as an adjustable electronic overtemperature monitor and a mechanical temperature limiter, protect against overheating. The UF260 is not only a testament to Memmert's commitment to quality but also an essential asset for any laboratory requiring reliable and precise thermal processing. INCLUDED: TheMemmert UF260 Forced Circulation Oven 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The mass standard is the foundation of accurate mass measurement, as it affects the quality and reli (more)ability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Plastic Packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. Set Includes: 8 mass standards, 2 pairs of tweezers, 1 brush and 1 pair of gloves.

Output: Constant voltage, constant current with automatic crossover Voltage: 10 V to 300 V, fully ad (more)justable in 1 V steps Current: 5 mA to 400 mA, fully adjustable in 1 mA steps Power: 75 W Terminals: 4 pair recessed female banana jacks, floating in parallel Timer: 001 to 999 minutes, fully adjustable Ripple: ±1% (at 300 V and 75 W) Line regulation: ±0.5% (at 300 V and 750 W) Load regulation: ±1% (at 300 V for a 50% change in output load) Drift: ±1% (after 30 min warm up at 300 V and 75 W) Voltage stability : ±1 V Current stability : ±1 mA Dimensions (DxWxH): 290 x 210 x 80 mm Weight: 1.8 kg