Randox RX Monza Clinical Chemical Analyser Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The VELP RESPIROMETRIC BOD sensor is designed to provide a SMART solution to water and wastewater qu (more)ality control laboratories. This tool from Velp was designed to simplify the analysis process and make measurements as quick and easy as possible. - The bright 4-digit LED display provides long battery life compared to other sensors on the market. - Intuitive 2-button interface for easy analysis setup. - Pressure range: 500 ÷ 2000 mbar (hPa). - Results available in BOD (mg/l) and pressure (mbar). - BOD scales: 90, 250, 600, 1000, 4000, higher values ​​after dilution. - Automatic conversion of pressure results to BOD. Technical details: - Electronic pressure sensor. - Bottle volume: 500 ml. - Databox power supply: via USB connected to the PC. - Sampling interval: 30 minutes to 48 hours, depending on the duration of the test. - Data archive: on the sensor, RESPIROSoft™ database and Ermes Cloud. - Measurement period: From 1 to 730 days. Wireless control with DataBox™ and RESPIROSOFT™ software The proposed kit includes the wireless transmitter, for maximum comfort. The RESPIROMETRIC sensors transmit data directly to the PC allowing real-time monitoring of the analysis curve. Data management software is also included in the kit. The DataBox™ transmitter will be able to manage up to 400 RESPIROMETRIC sensors (66 systems). In short, the advantages: - Real-time analysis curve - More important information displayed at a glance - Sensor battery monitoring - Pre-installed methods - Test reports - Comparison of results - Simple and easy management Connect and monitor your sensors to the Ermes cloud wherever you are Improve the laboratory experience and prepare for the future, the connection to the VELP Ermes Cloud will improve the productivity and comfort of laboratory operators. - Real-time display of analyzes with simple and complete graphs, even from different PC, tablet and smartphone locations. - Real-time instrument status. - Advanced support for applications and services. - Access your analysis database anytime, anywhere, all you need is an internet connection. - Create and share analytics reports in multiple formats. - Instant event and alert notifications based on your settings (platform and email).

Pharmacia BIAcore Processing Unit Surface Plasmon Resonance System This was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with minor marks from use. Pharmacia Thermo Block A.Pharmacia Thermo Block B.Pharmacia Thermo Block C.BIAcore upgrade kit.BIAcore software July 2021.BIAcore Advisor Tutorial.BIAcore Advisor Kinetics.BIAcore Preventive Maintenance Kit 4.BIAlogue Software set:BIAcore 1000 Control Software version 1.3 Disc 1 to 3BIAlogue System Specific Data.BIAapplications Handbook.BIAcore Upgrade Instrument Handbook.BIAevaluation 2.1 Software Handbook.BIAcore Getting Started 2000 Hand Book.BIAtechnology Handbook.BIAcore Qflex Kit Vitamin B12 Handbook.BIAcore Quant Biotin Kit Users Guide.BIAcore Quant Folic Acid Kit Users Guide.BIAcore Sensor Surface Hand Book.

Eco Chemie BV Metrohm Autolab SPR Biosensor Instrument with Software & Manual This was removed  (more)from a university lab where it was surplus to requirements. The unit powers up but we were unable to test it further. The instrument is supplied with the manual and software. It is in good cosmetic condition with minor marks from use.

TA Instruments TGA Q500 Thermogravimetric Analyzer with TGA Heat Exchanger This item was removed fro (more)m a university laboratory where it was surplus to requirements. The TGA Q500 Thermogravimetric Analyzer powers on and is in good condition with some wear, including corrosion on the autosampler where samples are stored. The TGA Heat Exchanger powers on and is in great condition with minimal wear. We are unable to conduct further testing at our facility. Specifications:- TGA Q500 Thermogravimetric Analyzer - Model: TGA Q500 - Serial No.: 0500-0618 - Instrument No.: 953001.901 - TGA Heat Exchanger - Model: TGA Heat Exchanger - Serial No.: N/A (Info plate missing) Included Software:- Advantage Software: - QAdv v2.5 - QAdvx v2.6 - RA v5.4 - WinUA v4.3 - TA Instruments Advantage (2006, Version 4.6.6, P/N 925710.001) - Thermal Advantage Help Videos: - 1999, P/N 925711.001 REV A - TA Instruments Utility Software: - 2004, Version 1.0.1, P/N 925709.001

Macherey Nagel PF-11 photometer. Portable photometer for field and laboratory use. For the evaluatio (more)n of VISOCOLOR and VISOCOLOR ECO kits and tests in NANOCOLOR cuvettes. Direct reading in mg/L. Extinction measurement. Cuvette lock for 16 mm round tubes. Easy to use. Photometric pH measurement. Manual wavelength adjustment: 380/405/470/520/605/720 nm. Light source: Tungsten lamp. Powered by four batteries. Suitcase. User manual. The Macherey Nagel PF-11 photometer is designed and built to provide accurate and reliable results. It is recognized and appreciated by experienced analysts who appreciate its easy-to-use and time-saving approach with step-by-step instructions.

MEMMERT WNE 14 laboratory water bath Model: WNE 14 Temperature range: approx. 5 ° C above ambient te (more)mperature to +95 ° C Setting temperature range +10 to +95 °C Display resolution: 0.1 °C Capacity: approx. 14 litres Internal dimensions (WxDxH): 350 x 140 x 290 mm External dimensions (WxDxH): 578 x 347 x 436 mm Mains: 230 V / 50 ... 60 Hz / 1800 W Weight: approx.: 16.0 kg Filling level at least 97 mm Filling level max. 120 mm Timer digital timer 1 min. to 999 hours for: ON (continuous operation) WAIT (delayed start) HOLD or HOLD depending on the target temperature with "hold time guarantee" Tested at 37°C and 70°C Alarm OK

Vacuum systems are widely used for the aspiration and disposal of liquid waste, for instance, when r (more)emoving media from cell cultures, supernatant after centrifugation, and wash solutions from immunoassay well plates. The aspiration of waste liquids is a routine yet time-consuming task. The user-friendly VACUSAFE system streamlines this repetitive workflow, freeing up lab personnel to perform other vital tasks. It also provides a secure alternative to do-it-yourself liquid waste disposal systems typically found in laboratories, protecting operators from exposure to liquids and aerosols for a safer working environment. The system additionally features optional liquid level detection to prevent overfilling, and a filter to protect the vacuum source from contamination. Vacuum range: -300 to -600 mbar (adjustable) Pump flow rate: 8 l/min (air) Liquid aspiration rate: 17 ml/s (aspiration pipet) Noise emission: <50 dB(A) at 1 m Dimensions (HxWxD): 530 x 180 x 320 mm Weight: 3.4 kg

PS R2.H series balances redefine the level of standard precision balances. Not only do they share al (more)l the features of R series balances, but can also work in adverse operating conditions (condensed dust, drops of water falling down at different angles typical for IP 54). LCD display These balances are equipped with innovative LCD display allowing for clear and legible presentation of a measurement result. Moreover, it offers new text line which supplies the user with some additional messages and information, e.g. product name or tare value. Interfaces Additional asset of PS R2.H balances are their interfaces build-in a hermetic closed housing which is separated from the balance. The interfaces include 2&times;RS 232, USB type A, USB type B, and Wireless Connection optionally. Balance housing is made of plastic, whereas its pan of stainless steel. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

M1 Mass Standard - rectangular. Nominal value - 100 kg.

Benchmark IPS7000-5 MHS-5 5-Position Hotplate Stirrer The Benchmark Multi-Position Hotplate Stirrers (more) provide simultaneous heating and stirring of multiple samples. The large top-plates feature a durable, chemically resistant, white-ceramic coating that provides exceptionally uniform temperature control up to 120°C. Both mixing speed and temperature are conveniently controlled on the digital display, which also features a safety LED that warns the user when the top plate is hot and unsafe to touch. Two models are available, offering either 5 or 10 stirring positions. Each stirring position is driven by an independent motor, providing efficient mixing of sample sizes up to 1000ml. With increased spacing (100mm) between stirring positions, the top surface is designed to accept a wide range of vessel types, including beakers, Erlenmeyer flasks and media storage bottles. INCLUDED: The Benchmark IPS7000-5 MHS-5 5-Position Hotplate Stirrer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty