Easily list your scientific equipment

Top suppliers for laboratory & industry

New and used instruments

Marketplace
Analytics
Brand
Agilent
Model
Agilent / Keysight DigRF v4 N2X N5540A + N5344A Analyzer Module + N5346A Cable
Supplier
PROFCONTROL GmbH
Location
Potsdam - Germany
Price
€1,500.00 
(€1,785.00 incl. VAT*)*if applicable
This item is
for sale
State of item
used
Shipping information

Shipping weight: 10,00 kg

Categories

Agilent / Keysight DigRF v4 N2X N5540A + N5344A Analyzer Module + N5346A Cable

PROFCONTROL GmbH€1,500.00 
(€1,785.00 incl. VAT* )* - if applicable
item image

Description by the supplier

Manufacturer: Agilent / Keysight

Model: N2X Chassis N5540A + N5344A DigRF Analyzer Module for DigRF v4 + N5346A  High Performance Flying Leads Probe for DigRF v4

P/N: MY48424304

NOTICE: THE SOFTWARE IN THE PRODUCT REQUIRES A LICENCE KEY TO OPERATE - THE  KEY FOR N5344A HAS BEEN PRE-INSTALLED ON THE UNIT ANDITS READY TO USE.

N2X Chassis N5540A 2-slot Portable Chassis:

The chassis provides a convenient platform for testing scenarios where  portability or small size is a factor. Two different card types can be configured simultaneously allowing for test scenarios that use a  combination of port types.

• Hot-swappable test cards• Multi-user, remotely accessible• Support for SONET/SDH, POS, ATM, Ethernet, FR and Fibre Channel interfaces• Capable of daisy-chaining up to 60 chassis, time synchronized to 10 ns• Hundreds of test ports available in one system• Completely backward compatible with existing RouterTester 900, OmniBER XM and  SAN Tester hardware and software

N5344A DigRF Analyzer Module for DigRF v4:

The Keysight N5344A DigRF exerciser module belongs to the Keysight RDX family.

The module transparently monitors DigRF v4 bus activity, helping digital and RF  engineers integrate and troubleshoot devices incorporating the DigRF digital serial bus across a wide variety of over the air standards. The  analyzer module allows engineers to work in the domain (Digital or RF) of their choice to quickly characterize the DUT´s digital and wireless behavior.  It operates in conjunction with Keysight vector signal analysis software.

Key Features & Specifications:

• Support DigRF v4 bus specifications• Support speeds up to 3Gb/s, with single or multi-lane configuration• Full protocol decoding capabilities• Extracts and transfers digital IQ for analysis with 89600B VSA software

Analyzer features and operation:

• Simultaneously acquires Tx/Rx bidirectional traffic• Tracks changes across all speed modes – sleep, low power and high speed• Displays data and control packets at the protocol level• Triggers on protocol-specific packets, specific bits within a packet, and  protocol violations

N5346A High Performance Flying Leads Probe for DigRF v4:

The DigRF Flying Leads probe makes it possible to access DigRF links with no  integrated connectors, at rates up to 3Gb/s. With very low capacity loading, the probe enables you to monitor the DigRF protocol in space constraint designs,  without influencing the monitored signals.

Key Features & Specifications:

• Low capacity loading, enables insight without influencing the monitored  signals• The probe amplifier is outside of the probe tip, ensuring the probe tip size  is kept to a minimum to address space restraints and also thermal concerns• The probe can be used with single lane or multilane bus configurations• Both Tx and Rx lines can be probed with a single N5346A flying lead set.• Keysight provides a unique probe portfolio for DigRF bus standards, including  the Soft touch probe and Flying leads probe

NOTICE: THE SOFTWARE IN THE PRODUCT REQUIRES A LICENCE KEY TO OPERATE - THE  KEY FOR N5344A HAS BEEN PRE-INSTALLED ON THE UNIT ANDITS READY TO USE.

Items delivered:

- N2X Chassis N5540A 2-slot Portable Chassis- N5344A DigRF Analyzer Module- N5346A High Performance Flying Leads Probe- Power Cord

The whole system is in good cosmetic condition and is 100% functionl tested.  Ready for your use.

About PROFCONTROL GmbH

At Profcontrol GmbH we offer reasonably priced lab & research equipment. All devices you find on profcontrol.de are in stock and can be delivered any time. Every product and system is tested and overhauled before being offered in our online shop.

About QuestPair

QuestPair matches professionals in research and industry with manufacturers, suppliers and resellers of scientific products. Companies and organisations can easily sign up for an account and showcase their laboratory equipment and other products on the marketplace. It is possible to list both new as well as used equipment. QuestPair features a variety of equipment for the physical, chemical and life sciences such as spectrometers, balances, centrifuges, testing devices, medical devices, incubators, microfluidics kit, heaters, coolers and other specialist instruments.

Related items:
Agilent / Keysight DigRF v4 N2X N5540A + N5344A Analyzer Module + N5346A Cable-cover
Agilent / Keysight DigRF v4 N2X N5540A + N5344A Analyzer Module + N5346A Cable

Manufacturer: Agilent / Keysight Model: N2X Chassis N5540A + N5344A DigRF Analyzer Module for DigRF  (more)v4 + N5346A  High Performance Flying Leads Probe for DigRF v4 P/N: MY48424304 NOTICE: THE SOFTWARE IN THE PRODUCT REQUIRES A LICENCE KEY TO OPERATE - THE  KEY FOR N5344A HAS BEEN PRE-INSTALLED ON THE UNIT ANDITS READY TO USE. N2X Chassis N5540A 2-slot Portable Chassis: The chassis provides a convenient platform for testing scenarios where  portability or small size is a factor. Two different card types can be configured simultaneously allowing for test scenarios that use a  combination of port types. • Hot-swappable test cards• Multi-user, remotely accessible• Support for SONET/SDH, POS, ATM, Ethernet, FR and Fibre Channel interfaces• Capable of daisy-chaining up to 60 chassis, time synchronized to 10 ns• Hundreds of test ports available in one system• Completely backward compatible with existing RouterTester 900, OmniBER XM and  SAN Tester hardware and software N5344A DigRF Analyzer Module for DigRF v4: The Keysight N5344A DigRF exerciser module belongs to the Keysight RDX family. The module transparently monitors DigRF v4 bus activity, helping digital and RF  engineers integrate and troubleshoot devices incorporating the DigRF digital serial bus across a wide variety of over the air standards. The  analyzer module allows engineers to work in the domain (Digital or RF) of their choice to quickly characterize the DUT´s digital and wireless behavior.  It operates in conjunction with Keysight vector signal analysis software. Key Features & Specifications: • Support DigRF v4 bus specifications• Support speeds up to 3Gb/s, with single or multi-lane configuration• Full protocol decoding capabilities• Extracts and transfers digital IQ for analysis with 89600B VSA software Analyzer features and operation: • Simultaneously acquires Tx/Rx bidirectional traffic• Tracks changes across all speed modes – sleep, low power and high speed• Displays data and control packets at the protocol level• Triggers on protocol-specific packets, specific bits within a packet, and  protocol violations N5346A High Performance Flying Leads Probe for DigRF v4: The DigRF Flying Leads probe makes it possible to access DigRF links with no  integrated connectors, at rates up to 3Gb/s. With very low capacity loading, the probe enables you to monitor the DigRF protocol in space constraint designs,  without influencing the monitored signals. Key Features & Specifications: • Low capacity loading, enables insight without influencing the monitored  signals• The probe amplifier is outside of the probe tip, ensuring the probe tip size  is kept to a minimum to address space restraints and also thermal concerns• The probe can be used with single lane or multilane bus configurations• Both Tx and Rx lines can be probed with a single N5346A flying lead set.• Keysight provides a unique probe portfolio for DigRF bus standards, including  the Soft touch probe and Flying leads probe NOTICE: THE SOFTWARE IN THE PRODUCT REQUIRES A LICENCE KEY TO OPERATE - THE  KEY FOR N5344A HAS BEEN PRE-INSTALLED ON THE UNIT ANDITS READY TO USE. Items delivered: - N2X Chassis N5540A 2-slot Portable Chassis- N5344A DigRF Analyzer Module- N5346A High Performance Flying Leads Probe- Power Cord The whole system is in good cosmetic condition and is 100% functionl tested.  Ready for your use.

€1,500.00 ex VAT
€1,785.00 incl. VAT if applicable
Germany
rf or microwaves testing equipment, analytical devices other
BOD Sensor Velp analysis system-cover
BOD Sensor Velp analysis system

BOD Sensor is an extremely reliable innovative solution for the determination of BOD, without the us (more)e of mercury. Easy to use, fast and simple. It screws directly onto the bottle containing the sample and a pressure transducer microprocessor transfers the BOD value directly to the display (in mg / l) and automatically stored in the BOD sensor (5 measurements at 24 hour intervals, offering the possibility of making the analysis even during the weekend). The BOD value can also be obtained directly from the display at any time, even after five days. Measurement is available on 4 different scales - 90ppm, 250, 600 and 999 BOD. For higher values, the measurement can be measured by diluting the sample. The BOD Sensor System 6 is a complete package for analyzing 6 samples simultaneously, consisting of a 6-position stirring base, BOD sensors, dark glass bottles, carbon dioxide absorption caps and magnetic stir bars. The BOD Sensor System 10 is a complete package for analyzing 10 samples simultaneously, consisting of a 10-position stirring base, BOD sensors, dark glass bottles, carbon dioxide absorption undercaps and magnetic stir bars. The stirring base has been designed to meet the user's needs, it is comfortable, guarantees a high quality stirring and the small footprint allows to accommodate up to 5 bases of 6 positions (30 samples) or 3 of 10 positions ( 30 samples) in a VELP incubator (FOC 200E). Determine the BOD value in 5 steps! To better analyze the BOD values ​​with the innovative VELP Scientifica systems, based on the respirometric technique, capable of providing highly reliable results, just 5 easy and simple steps are enough: 1. Add the magnetic stir bar to the dark glass bottle, add the sample and place the CO2 trap filled with the necessary reagents 2. Incubate everything 3. Screw in the sensor 4. Monitor the activity of microorganisms 5. Read the BOD value (ppm or mg / l), based on the change in pressure inside the bottle due to the activity of microorganisms Technical features: Sensor display: 3-digit LED display Bod measurement: mg/l (ppm) directly on the display BOD scales: 90, 250, 600, 999, 4000 ppm, Higher values after dilution Bottle volumes:  500 ml Data storage: BOD values at 24h intervals Sensor construction material: Technopolymer Power: BOD Sensor System 6 2 W; BOD Sensor System 10 2 W Sensor battery type: CR 2430 Power supply: BOD Sensor System 6 Sensors: 2x3V lithium batteries Stirring Station: 230V / 50-60Hz or 115V / 60Hz BOD Sensor System 10 Sensors: 2x3V lithium batteries Stirring Station: 230V / 50-60Hz or 115V / 60Hz

€1,372.00 ex VAT
€1,632.68 incl. VAT if applicable
Italy
water treatment equipment other, analytical devices other
People are watching right now:
Heraeus Biofuge 13 centrifuge 1990-cover
Heraeus Biofuge 13 centrifuge 1990

The Heraeus Biofuge 13 centrifuge is an excellent laboratory instrument that has stood the test of t (more)ime. Despite its age, this centrifuge remains an essential tool for many researchers and technicians, thanks to its reliable performance, ease of use, and versatility. One of the standout features of the Heraeus Biofuge 13 is its versatility. It is designed to accommodate a wide range of rotors, making it suitable for a variety of applications, including DNA isolation, protein purification, and cell culture. The centrifuge can reach speeds of up to 13,000 RPM, allowing for efficient and reliable separation of samples. Despite being an older model, the Heraeus Biofuge 13 still offers many benefits that make it a valuable addition to any laboratory. For example, its compact size and robust construction make it ideal for labs with limited space. It is also incredibly easy to use, with a simple interface that allows users to set the speed, time, and temperature, as well as select the appropriate rotor for their specific application. Another advantage of the Heraeus Biofuge 13 is its reliability. This centrifuge is built to last, with a sturdy construction and reliable components that ensure consistent performance over time. Its long lifespan and low maintenance requirements make it a cost-effective choice for labs with limited budgets. Overall, the Heraeus Biofuge 13 centrifuge is an excellent example of a laboratory instrument that has stood the test of time. Despite being an older model, it remains an essential tool for many researchers and technicians, thanks to its reliability, versatility, and ease of use. Its long lifespan and low maintenance requirements make it a cost-effective choice for labs with limited budgets, and its compact size and robust construction make it an ideal choice for labs with limited space.

€350.00 ex VAT
Netherlands
centrifuges, benchtop centrifuges
Disclaimer: QuestPair assumes no responsibility or liability for any errors or omissions in the content of this site. The information contained in this site is provided and presented on an “as is“ basis with no guarantees of completeness, accuracy, usefulness or timeliness.

Customer Service

Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.

We are available to assist you Mon-Fri, 10am - 5pm CET.

+31 (0) 73 7114717
[email protected]