RCS High Flow Microbial Air Sampler

AARIAC Clean Air CLR 20/30 S T UK Compressor Lab This item was removed from a university where it wa (more)s surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The unit was installed in late 2023 and had not seen much use. Also included is the following: Nardi Compressor - Dryer 400Installed/Replaced - 23/11/23

Emtek P100 Microbial Air Sampler Lab This item was removed from a university where it was surplus to (more) requirement. It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility. As seen, there is damage sustained to the display screen, however, it does not impact its functionality. The Unit comes with a case, 18V Charger and a Remote

Emtek P100 Microbial Air Sampler Lab This item was removed from a university where it was surplus to (more) requirement. It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility. 7.5" L x 5.5" W x 6"

This Turnkey Instruments OSIRIS Environmental Particle Monitor & Tripod Housing was removed from (more) a university lab where it was surplus to requirements. The item powers on and is in reasonable used cosmetic condition. It has not been tested further at our facility. It comes in a carry case with a power supply, USB cable & other small parts/fittings. There is a software disk included. Housing Tripod Height - 135cm Last calibration date - 18/01/2022

Climet Model CI-95A Microbial Air Sampler 100 LPM Lab This item was removed from a university where  (more)it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item includes a battery pack and charger.

Climet Model CI-95+ Microbial Air Sampler Lab This item was removed from a university where it was s (more)urplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item does not include a battery pack and charger.

Max speed: 16400 rpm Temperature range: -9°C to 40°C Max centrifugal force: 25000 rcf Max kinetic en (more)ergy: 6100 Nm Max density of samples: 1.2 g/ml Dimensions (HxWxD): 250 x 310 x 597 mm Weight: 34.8 kg Equipped with: 1x Eppendorf FA-45-30-11 Aerosol-tight lid 1x Eppendorf FA-45-30-11 fixed angle rotor (max 14000 rpm; 30x 1.5 mL/2.0 mL micro tube capacity)

Improvision Phylum Imaging Software Version 1.4.4 This was removed from a university lab where it w (more)as surplus to requirements. The software was downloaded onto the PC without issue, it will need a product unlock code to make it operational, which is supplied on the back of the CD case.

KNF N86KN.18 vacuum pump. Diaphragm pump and compressor for slightly corrosive gases and vapors. Wit (more)hout oil. Flow L/min 6, final vacuum mbar 100, pressure bar 2.4. Includes vacuum regulator. Dimensions 164*141*90mm. Weight 1.9 kg. User manual.

MPS Y device consists of the electromagnetic module of high resolution and Y operation panel equippe (more)d with LCD. It has been designed to be easily integrated into customer-owned weighing systems, and therefore can be built either into technological line or inside weighing devices or laboratory equipment. The MPS Y allows to perform the measurements using the under-pan weighing method or a regular weighing pan. In case of the under-pan method the load is suspended beneath the module. By cause of high measurement accuracy, it is recommended to install the module inside customer's device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The MPS module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 g, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration. The Y panel functionality is remarkable thanks to use of numerous interfaces: 2×RS232, 2xUSB type A, Ethernet, 4×IN, 4×OUT, Wi-Fi. MPS.Y can also be integrated with E2R Weighing Records and E2R PGC.

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.