HANNA HI97713 phosphate photometer, up to 2.50 mg/L

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

WTW OXI 3205 portable oximeter + Cellox 325 probe With Cellox 325 probe Waterproof dissolved oxygen  (more)measuring instrument Battery type: 4 x 1.5 V AA rechargeable batteries or 4 x 1.2 V NiMH rechargeable batteries Compensation and correction of atmospheric pressure: Automatic from 500 to 1100 mbar Protection class: IP 67 Screen display: backlit graphic LCD Dissolved O2 measuring range: 0.00 to 90 mg/L Dissolved O2 accuracy: ±0.5% Dissolved O2 resolution: 0.01, 0.1mg/L Temperature precision/accuracy: ±0.1°C Working/Operating/Use Temperature: -5 to 50°C Net weight: 2KG

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Vortex ZX4 agitator is a modern and advanced vortex with variable speed and two operating modes, (more) sensor or continuous. Thanks to the revolutionary IR sensor mode, an infrared (IR) system detects the presence of the test tube and the instrument is activated automatically: less user operations, more comfort in the working environment Technopolymer structure and ergonomic design guarantee excellent chemical resistance and considerable stability on the laboratory bench, and can be used on many surfaces. Wide range of accessories. IR sensor, VELP patent VELP Scientifica is the only company in the world to supply the technological and revolutionary IR system: as soon as the test tube is detected by the sensor, the latter automatically activates the instrument, without the need for any pressure from the laboratory technician. Compared to the classic pressure mode, the patented IR sensor system guarantees a drastic reduction of the stresses perceived by the operator, increasing the comfort of the working environment. Flexibility, Numerous Accessories ZX4 is an extremely versatile solution, being able to be combined with a variety of platforms. The easy and safe attachment of the platforms is done with a simple push, and guarantees excellent performance in the mixing of many types of tubes and containers. - Variable speed operation, electronically controlled up to 3000 rpm - Wide choice of accessories for tubes, plates and bottles - Universal voltage / frequency model - The accessories adapt with a simple push - Excellent resistance to chemical agents thanks to the technopolymer casing - Excellent stability with zinc alloy base - Large, non-slip rubber feet to stay in the desired position - IP 42 protection against particles and liquids - Designed for maximum durability and backed by a 3-year warranty

F1 class mass standards are exceptional measuring tools that represent the pinnacle of precision in  (more)the field of metrology. Classified as F1 metrology class, they are perfect for advanced applications where every detail of measurement is of paramount importance. F1 mass standard: flat polygonal sheet Nominal value: 2 mg Material: aluminum F1 Class Mass Standards – Key Features Highest Precision and Accuracy - F1 class mass standards are characterized by absolute measurement precision and extraordinary accuracy. They are designed to meet the most stringent standards for acceptable deviation from actual weight. Stability under Difficult Conditions - An important feature of F1 class mass standards is their ability to maintain measurement stability even under harsh environmental conditions. The standards of this class are resistant to changes in temperature, humidity and other factors that affect the precision of measurements. Calibration in Accordance with International Standards - The calibration process for F1-class mass standards is rigorous and in accordance with international standards. This ensures that standards of this class are globally recognized and can be used in different countries. Specialized Construction Materials - F1-class standards are often made of materials with unique physical properties. This provides them not only with precision, but also with durability and wear resistance. Application 1. Industrial Metrology F1 class mass standards are used in metrology laboratories engaged in the testing and maintenance of measurement standards. 2. Scientific Research In scientific research, especially in high-precision fields such as physics and astronomy, F1-class mass standards are a key tool. 3. Aerospace Industry In the precision mass measurements required by the aerospace industry, F1-class standards guarantee reliability and accuracy. 4. Calibration Laboratories In calibration laboratories where uniformity and precision are a priority, F1-class mass standards are the standard of excellence. F1-class mass standards are synonymous with the highest quality and precision in the field of metrology. Their use is crucial where even the slightest deviation from the standard can carry unpleasant consequences. They are tools for advanced applications that contribute to raising standards in the field of mass measurement.

Hermle Z327 Centrifuge Tissue Culture Bundle w/ Swing Out Rotor for 15ml and 50ml Tubes Speed Range  (more)200 to 18,000 RPM (4,500 RPM with included rotor) Maximum Capacity 4 x 200ml Warranty 5 Year Manufacturer's Features - Maintenance-free induction drive - Microprocessor with large LCD display - Motor driven lid lock - Automatic radio-frequency rotor identification system (RFID) with over speed protection, immediately upon rotor insertion - Active imbalance identification and cut-off (rotor specific) - A large variety of rotors and accessories - Audible signal at the end of each run with several melody options - Noise level under 63 dBA at max. speed - Manufactured according to international safety regulations, i.e. IEC 61010 - Rotor exchange is easy to handle - Optimized airflow system keeps the samples cool (Z327) - Stainless steel chamber The Hermle Z327 Centrifuge Tissue Culture Bundle w/ Swing Out Rotor for 15ml and 50ml Tubes is a high-performance centrifuge capable of speeds ranging from 200 to 18,000 RPM (4,500 RPM with the included rotor), with a maximum RCF of 23,542 x g (3,350 x g with the included rotor). With a maximum capacity of 4 x 200ml, this centrifuge is ideal for a variety of applications in the life sciences, including tissue culture and molecular biology. Its timer allows for up to 99 hours and 59 minutes of operation, with the option for continuous use. The Hermle Z327 also has the ability to store up to 99 programs, making it highly customizable for specific experimental protocols. Both the Z327 and the refrigerated Z327-K offer a wide assortment of rotor options (up to 19), making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high-volume fixed angle rotors is very simple and can be done in a matter of seconds. The Z327-K features rear mounted refrigeration system, optimized for saving space on the lab bench at only 40 cm wide! Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z327 Centrifuge Tissue Culture Bundle w/ Swing Out Rotor for 15ml and 50ml Tubes includes: - Z327 Centrifuge - Z327-200-AC 4 x 200ml Swing Out Rotor - 2 x Z327-200-BUK 200ml Round Buckets for Z327-200-AC - 2 x Z327-200-A15B 4 x 15ml Conical Inserts for Z327-200-BUK - 2 x Z327-200-B50 2 x 50ml Conical Buckets for Z327-200-AC - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The ChemiDoc System is based on CCD high-resolution, high-sensitivity detection technology and modul (more)ar options to accommodate a wide range of samples and support multiple detection methods including fluorescence, colorimetry, densitometry, chemiluminescence, and chemifluorescence. The system is controlled by Image Lab software to optimize imager performance for fast, integrated, and automated image capture and analysis of various samples. The system accommodates a wide array of samples, from large handcast polyacrylamide gels to small ReadyAgarose Gels and various blots. The system is an ideal accompaniment to PCR, purification, and electrophoresis systems, enabling image analysis and documentation of restriction digests, amplified nucleic acids, genetic fingerprinting, RFLPs, and protein purification and characterization. The ChemiDoc System offers fast and sensitive chemiluminescence detection in addition to gel and blot documentation of fluorescent and colorimetric samples. The system includes a supersensitive 16-bit CCD camera that is supercooled for detection of faint samples. The ChemiDoc XRS+ system can be used for imaging with a wide variety of applications that require high resolution and sensitivity (such as chemiluminescent western blots). The ChemiDoc System eliminates the need to use costly and unreliable X-ray film technologies while providing quantitative and reproducable data in seconds. The system features a signal accumulation mode (SAM), which guides a user through determining optimum exposure time and capturing a desired image of a chemiluminescent sample. Chemiluminescence: Yes Fluorescence: Yes Colorimetry/densitometry: Yes Gel documentation: Yes Maximum sample size: up to 28 x 36 cm Maximum image area: up to 26 x 35 cm Maximum image area: (For standard UV-excited gels) 25 x 26 cm Excitation source: Epi-white light and trans-UV (302 nm) plus white conversion screen Illumination control: 5 modes (trans-UV, epi-white, and no illumination for chemiluminescence), plus white conversion screen Detector: Supercooled CCD Pixel size (H x V): 6.45 x 6.45 µm Cooling system: Peltier Camera cooling temperature: -30°C controlled Filter selector: 3 positions (2 for filters, 1 without filter, for chemiluminescence) Emission filters: 1 included (standard), 3 optional Dynamic range: >4.0 orders of magnitude Pixel density (gray levels): 65,535 Dynamic flat fielding: Application specific, for all applications Instrument size (L x W x H): 36 x 60 x 96 cm Instrument weight: 32 kg Including Image Lab software

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW