Parker Balston Lab Gas Generator Model 74-5041-220

CLIMATE CHAMBERS KK SMART PRO POL-EKO KK - RELIABLE AND HIGHLY CUSTOMIZABLE Built and designed witho (more)ut compromise, they are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 60°C and thanks to an ultrasonic humidifier, they regulate humidity from 30% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KK Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm - Available with FIT: phytosystem – day and night simulation with intensity control. To find out more, download our informative pdf: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. NOTE: the temperature range that can be used with FIT active is +10°C... +50°C. KK SMART PRO SERIES POL-EKO offers 9 climatic chamber models with capacities from 109 to 1485 litres. Unleash your possibilities. In the image below, the graph shows the excellent working range (humidity/temperature) that the POL-EKO climatic chambers are able to offer you, with the KK series (ultrasonic humidifier) ​​and with the KKS series (steam humidifier ). ULTRASONIC HUMIDIFIER Climatic chambers with ultrasonic humidifier are professional and reliable tools to guarantee stable and precise conditions. The maximum temperature of 60°C allows it to be used for seed germination, mushroom and plant cultivation or for food testing. The perfect climatic conditions allow stability testing of pharmaceutical and cosmetic products, as well as packaging and electronics. NOTE: For the KK series, deionized water (1 μS/cm) must be used. Feed water source: deionized water tank; deionizer; internal deionized water network. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Container for deionized water 2 - Power cable 3 - Connectors 4 - Connectors (to a tank with demineralised water or deionizer) 5 - Service connector 6 - Connection to the drain 7 - Main switch 8 - LAN port 9 - Fuse For larger models (KK 500 / 700 / 1200 / 1450): a - Power cable b - Container for deionized water c - Condensate collection tray with pump d - Main switch e - LAN port f - Fuse Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the inside of a climatic chamber with LED series Fitotrone System.. - Door with panoramic window - Perforated shelf - Reinforced shelf - Stainless steel basins - Phitotron FIT system - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access door - Additional 30 mm access door ◉ POL-EKO CUSTOMERS The SPEKTROCHEM research and development center for paints, adhesives and polymers has been a loyal POL-EKO customer for several decades. Use climatic chambers for tests on water-based raw materials prepared in the laboratory.

This Peak Scientific PH600-UK Hydrogen Generator was removed from a university lab where it was surp (more)lus to requirements Item is in good cosmetic condition with minor marks but is missing side panel screws. No testing was carried out as it appears to be missing parts. This item is listed as spares/repairs as no tests have been performed.

This Peak Scientific Nitrogen Gas Generator Model: NG250A was removed from a university lab where it (more) was surplus to requirements. The unit powers up and has passed a professionally performed health check with a couple of advisories. It did not require a service reset. The full report is available on request. It is in good cosmetic condition with marks from use. It comes with a user manual and disk.

Peak Scientific Trace 500 Hydrogen Generator This was removed from a university lab where it was su (more)rplus to requirements The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

It allows the observation of samples without losing temperature.

This Skalar San+ Segmented Flow Wet Chemistry Autoanalyser System was removed from a university lab  (more)where it was surplus to requirements. Everything powers up but has not been tested as a system as there is no PC or software. Everything is packed in black flight cases. The system consists of: Skalar San+ Segmented Flow AutoanalyserType - 4000The unit appears to be fixed to the bottom half of the flight box Skalar SamplerType - 1000 Skalar InterfaceType - 8503 Skalar ReactorType 5521 HP Deskjet 930C Printer There is one box that contains the following Skalar parts/tubing (listed by part number)1 x Skalar type - 26200903 - SN- 002471 x Start up kit 57038 x 52104 x 53246 x 52021 x 53251 x 52611 x 1011 Tubing (Mix of sealed/opened packs):-1 x 51501 x 31421 x 31501 x 51411 x 51303 x 10601 x 30241 x 30255 x 30261 x 30273 x 30286 x 30293 x 30304 x 30314 x 30323 x 30333 x 30351 x 3036

22 x High Perfection LP1090-36-GG-290 These were removed from a university lab where they were surpl (more)us to requirements. The units are all inside open boxes and are all in good cosmetic condition. We were unable to test them Model LP1090-36-GG-290Part No. 20-3406 REV: A Power supply dims:L32cm x W6cm, x H4cm

This Eppendorf 5810R Refrigerated Laboratory Centrifuge was removed from a university lab where it w (more)as surplus to requirements. The unit powers up and is in good cosmetic condition. It is in good working order. Tested with the A-4-62 rotor fitted, it ran smoothly up to, 4000rpm. The centrifuge was last serviced by an engineer on 11.07.23 All additional items included: 1 x Eppendorf A-4-62 Swing Bucket Rotor4 x MTP swinging plate buckets 4 x 250 ml rectangular plate buckets8 x tube holders 1.2-5ml 25 wells2 x 15ml bucket adapters 9 wells

MARSHALL Select MS-PA1000UL Autoclavable Pipette, 100-1,000ul Volume Range 100 to 1,000ul Adjustabl (more)e or Fixed Volume Adjustable Pipette Type Manual Air Displacement Features - Ergonomic design with a light touch plunger and relaxed finger rest reduces user fatigue - Fully autoclavable, allowing for easy sterilization - Constructed from high-quality, heat-resistant materials for durability - UV and chemical resistant to withstand harsh laboratory conditions - Centrally located digital display facilitates ambidextrous use - Quick-release pipette tip ejector simplifies tip changes - Volume lock prevents accidental volume adjustments - Compatible with universal pipette tips for versatility - Suitable for both forward and reverse pipetting techniques - Ideal for handling both low and high-viscosity liquids, enhancing versatility in laboratory procedures The MARSHALL Select MS-PA1000UL Autoclavable Pipette is a high-performance, manual air displacement pipette designed for precision and comfort in laboratory applications. This pipette offers an adjustable volume range from 100 to 1,000ul with precise 5ul increments, ensuring accurate measurements. It features an ergonomic design with a light touch plunger and relaxed finger rest, which minimizes user fatigue and enhances comfort during extended use. Constructed from high-quality, heat-resistant materials, the MS-PA1000UL is fully autoclavable, providing excellent protection against UV light and chemicals, ensuring durability and reliability in harsh laboratory environments. The design includes a centrally located digital display for easy viewing by both left- and right-handed users, enhancing its ambidextrous usability. Additional features include a rotating counter knob for quick volume setting, a quick-release pipette tip ejector for convenient tip changes, and a volume lock to prevent accidental adjustments. This pipette is compatible with universal pipette tips and is suitable for both forward and reverse pipetting techniques, making it versatile for handling low-viscosity liquids as well as more challenging higher-viscosity or foamy samples. The MS-PA1000UL is the ideal choice for laboratories seeking a reliable, easy-to-use pipette that meets rigorous standards, including ISO 9001:2008 and ISO 13485:2003 certifications, along with CE marking. INCLUDED: The MARSHALL Select MS-PA1000UL Autoclavable Pipette, 100-1,000ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus Guardian 5000 e-G52HS07C-K1 Hotplate Stirrer, 120V Temperature Range Ambient + 5°C to 550°C Sp (more)eed Range 50 rpm to 1,800 rpm Capacity 20 L Features - Heats and stirs up to 20 L with stable performance - Temperature range from ambient +5°C to 550°C for broad applications - 7 x 7 inch ceramic plate ensures even heat distribution - Adjustable speed range from 50 to 1,800 rpm for versatile mixing - High-contrast LCD display for clear status visibility - Ethernet, USB, and RS232 connectivity options - CE and TUV certified for dependable safety standards - Includes Pt1000 temperature probe and holder for accurate temperature management The Ohaus Guardian 5000 e-G52HS07C-K1 Hotplate Stirrer, 120V, offers precise heating and stirring for a wide range of laboratory applications. With a durable 7 x 7-inch ceramic plate, this unit provides consistent heating up to 550°C and accommodates up to 20 liters, making it suitable for various solution preparation needs. Its adjustable speed range of 50 to 1,800 rpm ensures versatility, from gentle to vigorous mixing. Equipped with a bright LCD display, the Guardian 5000 allows for easy monitoring of all settings, while Ethernet, USB, and RS232 connectivity streamline data logging. Certified with CE and TUV for safety, this model includes a Pt1000 temperature probe and holder for precise temperature control, along with a programmable timer that runs up to 99 hours and 59 minutes, making it an ideal choice for any lab environment. INCLUDED: The Ohaus Guardian 5000 e-G52HS07C-K1 Hotplate Stirrer, 120V includes: - 30500590 Temperature Probe - 30973298 Temperature Probe Holder - 1.5" (3.8 cm) PTFE Coated Stir Bar - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.