Miltenyi Biotec autoMACS Cell Separator Model no. 003 Lab

Ohaus MB23 Moisture Analyzer Superior performance, numerous configurations and optimal results The M (more)B23 analyzer provides an accurate determination of moisture content at an unbeatable value. Featuring a large backlit LCD display, standard RS232 port, 110g range with 0.01g/0.1% resolution and infrared heating (no glass), the MB23 analyzer offers moisture determination for any budget. Applications Determination of the percentage humidity, determination of the percentage solid component, weighted. Display Backlit liquid crystal display (LCD). Operation Power cord (included). Communication RS232 (included). Structure Infrared heating, ABS armor, metal plate holder, metal plate manipulator, protective hood. Construction features Three shutdown criteria (manual, timed, automatic), 1 standard heat profile, heating range from 50°C to 160°C (in 5°C increments).

This High-Q femtoREGEN Class 4 Laser was removed from a university lab where it was surplus to requi (more)rements. The unit is untested and was marked as faulty by the lab. An engineer inspected it, and they identified the optics, Second harmonic and third harmonic crystals were in good order. They were unable to test it further without the water circulator, though they did mention it looked like someone had been inside the pocket cell in the past. The fault is unknown but could be something to do with the pocket cell. The system is comprised of; 1x High-Q femtoREGEN Laser:Model IC-1030-1000 Yb HR REG AMP SHG-THG Inside the unit:1x User Replaceable Diode Module (URDM #2506)The unit is in good cosmetic condition. 1x User Replaceable Diode Module (URDM 3W/5.14A/25C/976.2nmThe unit is in good cosmetic condition.

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

F1 Mass Standard - knob weights with adjustment chamber - set (1 mg - 50 g), plastic box Number of p (more)ieces in the set: 20 Weights 1 g i 2 g – solid masses without adjusting chamber

Ohaus ISLDMPHDG Incubating Shaker The Ohaus ISLDMPHDG Incubating Light Duty Shaker is designed to in (more)cubate samples from 5° ambient to 65° C depending on the model and are optimized for shaking microplates, deep-well plates, or micro-tubes. The ISLDMPHDG has an 8 lb (3.6 kg) capacity while the Incubating Microplate Shaker can hold up to four standard or deep well plates. Incubating-Cooling Mini Shaker is designed to hold two microplates or two optional modular tube blocks. The ISLDMPHDG features LED displays with touchpad controls. The variable speed microprocessor control provides consistent, uniform shaking action. The microprocessor will display the last setpoint and will restart if power is interrupted. Triple eccentric drive with permanently lubricated ball bearings and maintenance-free brushless DC motor provides reliable service and continuous duty operation. Units slowly increase speed to desired setpoint to avoid splashing. Digital models feature overload protection. Audible and visual signals activate when the system detects obstruction or tray overload. The Ohaus ISLDMPHDG Incubating Shaker is brand-new . Includes: Power Cord Operator's Guide Manufacturer's Documentation Full 2 Year Parts and Labor Warranty Ohaus ISLDMPHDG Incubating Shaker SpecificationsTemperature RangeAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°CSpeed Range100 to 1200 rpmSpeed Accuracy± 2%Timer1 second to 160 hoursOrbit3 mm (0.12")Maximum Weight Capacity4 microplates or 2 micro-tube racksTray MaterialAluminumTray Dimensions (L x W)11 x 7.75" (27.9 x 19.7 cm)Overall Dimensions (L x W x H)17 x 11 x 7.75" (43.2 x 27.9 x 19.7 cm)Ship Weight30 lbs (13.6 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(4) { background-color: #fffacd; }

Boekel Scientific 151250 Digital Forced Air Incubator, 2.5 cu. ft. w/ Removable Light Shield, 115V T (more)emperature Range Ambient +8°C to 70°C Temperature Uniformity ± 1.0°C at 37°C Chamber Volume 2.5 cu. ft. (71L) Features - Forced air convection provides excellent temperature stability, uniformity, and recovery time after door opening to keep incubation environment at ideal temperature - Wide temperature range for multiple applications eliminates the need for multiple incubators for different temperature ranges - Single door configuration with removable door panel for light & dark incubations eliminates multiple incubators/multiple doors - Bright easy-to-use digital display with built-in timer - Energy efficient, low-power consumption design - Internal auxiliary outlet provides power for one accessory to be used within the incubator - UL, CE, CSA approved, RoHs compliant making it 100% recyclable - 2 Year Manufacturer's Warranty