Spectra Physics 2020 2025-45 Laser w/ 2560 Power Supply & 2270 Control Box Lab

The PowerPac Basic power supply is designed to provide constant voltage or current electrophoresis a (more)pplications. The power supply operates at the value specified for the constant parameter, with limits for the other parameters. To prevent damage to the electroferese cell, the PowerPac Basic provides automatic crossover to constant current or constant voltage depending on which set limit is first reached. If the set limit of the non constant parameter is reached, the power supply will switch, making the limiting non constant parameter the new constant. Output specifications: Voltage: Adjustable from 10 to 300 volt, in 1 volt increments Current: Adjustable from 4 to 400 mA, in 1 mA increments Power: 75 W Dimensions (WxDxH): 210 x 245 x 65 mm Weight: 1.1 kg

Olympus U-RFL-T Microscope Power Supply + U-LH100HG Lamp These were removed from a university lab wh (more)ere they were surplus to requirements. The units are in good cosmetic condition, but they do have various marks and signs of use. The power supply and lamp both power up fine. Included are;1 x Olympus U-RFL-T.1 x Olympus L-LH100HG. We cannot confirm how long the lamp has been used, as the timer was reset before we received the item.

Hoefer PS300B Electrophoresis Power Supply Voltage 10 to 300 V in 1 V step Current 4 to 500 mA in 1  (more)mA steps Maximum Wattage 90 W Features - Constant voltage or constant current mode with automatic crossover - 10 to 300 V, 4 to 500 mA, 90 W - Four sets of 4 mm output jacks - Ideal choice for most electrophoresis techniques - Continuous runs or 999 minute timer - Automatic recovery after power failure - Open circuit detection - Short circuit protection The Hoefer PS300B Electrophoresis Power Supply is a versatile and reliable solution for most electrophoresis techniques. Its compact design, large handle, and intuitive operation make it easy to integrate into any lab environment. Equipped with a large, easy-to-read LED display, the PS300B allows users to set constant voltage or current parameters, adjust the timer up to 999 minutes, and start runs effortlessly. With a range of 10 to 300 V and 4 to 500 mA, this power supply delivers up to 90 W of power, ensuring precision and adaptability for various applications. The PS300B features three distinct modes of operation: Constant Voltage Mode, where the power supply will attempt to maintain the user-selected voltage by automatically adjusting the current flow; Constant Current Mode, where the power supply will attempt to maintain the user-selected current flow by automatically adjusting the voltage supplied; and Automatic Crossover, which ensures that when the constant parameter (voltage or current) cannot be maintained due to power supply operating limits, the power supply automatically switches to maintaining the other parameter. Key features include short circuit and open circuit protection, automatic recovery after power failure, and four 4 mm output jacks for flexible connections. Designed for both continuous operation and timed runs, the PS300B ensures reliable performance, making it an ideal choice for consistent, efficient electrophoresis procedures. INCLUDED: The Hoefer PS300B Electrophoresis Power Supply includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The certified intrinsically safe PM01.EX power supply, manufactured by RADWAG, has been designed to  (more)power the HX5.EX indicator. PM01.EX power supply comes in two designs: PM01.EX-1: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. The certified intrinsically safe PM02.EX power supply, manufactured by RADWAG, has been designed to power the HRP.EX. PM02.EX power supply comes in two designs: PM02.EX-1-2: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM02.EX-2-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA.

The certified intrinsically safe PM01.EX power supply, manufactured by RADWAG, has been designed to  (more)power the HX5.EX terminal. PM01.EX power supply comes in two designs: PM01.EX-1: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. The certified intrinsically safe PM02.EX power supply, manufactured by RADWAG, has been designed to power the HRP.EX. PM02.EX power supply comes in two designs: PM02.EX-1-2: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM02.EX-2-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA.

Perkin Elmer LabChip GX Touch HT Automated Bioanalysis System This item was removed from a universit (more)y where it was surplus to requirements. The system is in fair cosmetic condition and powers on. We are unable to conduct further testing at our facility. Password not required. Includes the following: - Wireless keyboard - Wired Mouse - 2x USB with software - 1x Software Disc-LabChip GX V3.1

This listing is for a Thermo Scientific 75005701 Centrifuge Rotors and Buckets. The unit is in full (more) working condition and is ready for immediate release. Supplied with 75005702 Buckets. The Thermo Scientific 75005701 Centrifuge Rotor and Bucket are designed for use with the Thermo Scientific ST8 Bench top Centrifuge. This rotor and bucket combination offers enhanced functionality and versatility for efficient sample processing. Key Features: Compatibility: Specifically designed for use with the Thermo Scientific ST8 Bench top Centrifuge. Efficient Sample Processing: The rotor and bucket combination enables seamless integration with the centrifuge, optimizing performance for reliable and reproducible results. Versatile Capacity: Accommodates up to 4 buckets, providing flexibility to process different sample volumes and formats. Durable Construction: Constructed from high-quality materials, ensuring longevity and chemical resistance. Easy Installation and Removal: Precision-engineered design allows for quick and hassle-free rotor changes, minimizing downtime and optimizing laboratory workflow. Compatibility with Thermo Scientific Accessories: Compatible with a range of Thermo Scientific accessories, such as bucket adaptors and cushion adaptors, expanding the versatility of your centrifuge setup. Applications: The Thermo Scientific 75005701 Centrifuge Rotor and Bucket are suitable for various applications, including: Biological sample processing Cell culture Clinical specimen processing Laboratory testing and analysis

Universal oven / incubator MEMMERT UF55 / 300 °C NEW New equipment, in the original box. Max tempera (more)ture 300°C Temperature range: Ambient + 5°C -> 300°C With forced convection Capacity: 53 Liters 1 stainless steel grid Interior dimensions: 400 x 400 x 330 mm (LxHxD) External dimensions: 585 x 784 x 514 mm (WxHxD) 2000W / 220V Weight: 57 kg

For use with: KingFisher Apex Plate type: 96 KF, 96 DW Volume processing: 96 KF plate 50 to 150 μL,  (more)96 DW plate 50 to 1000 μL Format: 96 Particle size: >1 μm

Incubator CO2 BJPX-C Series. Models: 50 L (BJPX-C50), 80 L (BJPX-C80) and 160 L (BJPX-C160). Shirt  (more)air (optional for BJPX-C160 water jacket). Temperature range RT+5 to 60ºC. Stability ± 0.2 ° C uniformity (at 37ºC) ± 0.3 ºC. Range CO2 0 - 20%. Control, CO2 by infrared sensor. Sterilization by UV lamp, model shirt ire (optional water jacket).Timer 999 h, or continuous. Alarm of over-temperature and levels of CO2. Two trays are adjustable. Chamber of stainless steel. It shows the price for the model 50 L (BJPX-C50). For other models, use the drop-down.

Heidolph 036110212 Hei-PLATE Mix 'n' Heat Core+ Hotplate Stirrer, 135mm Plate The Heidolph 036110212 (more) Hei-PLATE Mix 'n' Heat Core+ Hotplate Stirrer, 135mm Plate is the classic among magnetic stirrers. It enables users to stir gently up to 1,400 RPM and to heat - with a high degree of precision - up to a temperature of 300°C. In addition, it convinces with its robust design and its sophisticated functionalities, such as its key and knob illumination, which provides information about active functions at any time. The dynamic rotary knobs respond to turning speed - slow for precise adjustments, or fast for bigger jumps. The locking function protects against accidental changing of the values. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures 50°C, protect against burns. The patented Kera-Disk® plate made of anodized aluminum is chemical-resistant, scratch-resistant and has a diameter of 145 mm (also available with 135 mm on request). Thus, with this unique size, it is suitable for the use of many accessories and samples on a small footprint. The material used also enables the fastest heating times. The Hei-PLATE Mix 'n' Heat Core+ Hotplate Stirrer, 135mm Plate offers you a digital display for setting your desired temperature to the degree. This precise temperature without overshooting is controlled by two selectable heating modes (FAST/PRECISE) and the optional external temperature sensor Pt1000. Click Here to View Product Video INCLUDED: The Heidolph 036110212 Hei-PLATE Mix 'n' Heat Core+ Hotplate Stirrer, 135mm Plate includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty