PowerPac HV High-Voltage Power Supply BIO-RAD

This listing is for a Consort EV261 Power SupplyAll Consort Maxi Series (EV200) power supplies have  (more)four output terminals for up to four simultaneous runs. Powerful microprocessor control allows complex programming, while manual mode permits the setting of voltage, current, power and time for routine electrophoretic runs. The parameters may also be changed temporarily without interrupting the run. Programming–up to 9 different programs, each with 9 steps, can be stored in the nonvolatile memory for future recall. Timer–can be set to automatically terminate the run and sound an alarm when the allocated time or volt hours has elapsed. Automatic cross-over–each model has constant voltage, constant current and constant power capabilities with automatic cross-over while showing which parameter is kept constant. Automatic recovery after mains failure–after restoration of power, the instrument will automatically continue the run for the remaining time. Data Transfer–optional data acquisition/control software for PC is available to visualise and examine the stored run details, store and program the methods, add notes to the run, identify the unit, copy or delete programs in the unit's memory. Safety precautions –the AC line is automatically disconnected from the high voltage transformer when a ground leakage path is detected protecting the user from potential shock. Other safety features include protection against any overload including accidental short circuit of the output and voltage increases smoothly.

3,500 V, 400 mA, 200 W operation 9 program memories with 4 programmable independant break parameter (more)s. Vh or mAh integration and dl/dt break function. Can be used for analytical and preparative IEF, PAGE, SDS-PAGE, 2-D techniques, immunoelectrophoresis, DNA sequencing and blotting. 100-132 VAC / 198-264 VAC, 50/60 Hz, 300 W

VG Micromass Programmed Power Supply  Model - M18A w/  M426 Analogue Ratio Unit These unit (more)s were removed from another system. VG Micromass Programmed Power SupplyModel - M18ASN - 1403-13We were unable to plug this in to test. It requires an adapter that we do not have. VG Micromass Analogue Ratio UnitModel - M426SN - 1421-02Powers on

Stanton Redcroft 1000ºc Tube Furance + Power Supply/Controller Lab This item was removed from a univ (more)ersity where it was surplus to requirement. It is in good cosmetic condition and in good working order.

Olympus U-RFL-T Microscope Power Supply + U-LH100HG Lamp These were removed from a university lab wh (more)ere they were surplus to requirements. The units are in good cosmetic condition, but they do have various marks and signs of use. The power supply and lamp both power up fine. Included are;1 x Olympus U-RFL-T.1 x Olympus L-LH100HG. We cannot confirm how long the lamp has been used, as the timer was reset before we received the item.

Varian 7000 FT-IR Spectrometer with FTS 6000 Power Supply This was removed from a university lab wh (more)ere it was surplus to requirements. The unit powers up but we were unable to test it further without the software. It is in good cosmetic condition with marks from use. Included are; Varian SpectrometerModel - 7000 FT-IRSN - 46040-409 Varian Power SupplyModel - FTS 6000SN - PS-0391-0806

APC UPS Uninterruptible Power Supply Model SRT6KXLI This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with minor marks.

VACUUBRAND BVC Professional Fluid Aspiration System Ultimate Vacuum 150 mbar / 112 torr Maximum Pum (more)ping Speed 0.5 CFM at 60Hz Control Range 150 - 850 mbar Features - Non-contact sensor for electronic monitoring of the liquid level in the collection bottle. - Disinfection routine for the suction tubing for drawing in disinfectant after switching off the pump. - Self-closing quick couplings (as accessory to the BVC professional G) for convenient and safe bottle change, e.g., for work with biohazards. - For professional work and a perfect fit for required safety protocols. The BioChem-VacuuCenter BVC professional serves for aspiration and disposal of biological fluids, providing outstanding levels of comfort and safety for working with biological and biohazardous materials. A non-contact sensor monitors the liquid level in the collection bottle electronically and prevents overfilling. A disinfection routine allows the suction of disinfectants through aspiration hand set and tubing after switching off the pump, and so supports demanding safety protocols. The BVC professional with 4l PP bottle with self-closing quick couplings minimizes risk in transporting hazardous waste and of contamination in the workplace. The version with coated 2l borosilicate glass bottle allows you to work with aggressive disinfectants like chlorine bleach. INCLUDED: The VACUUBRAND BVC Professional Fluid Aspiration System includes: - Chemistry Diaphragm Pump - 4L Collection Bottle - Adjustable Suction Power Control Panel - Non Contact Liquid Level Sensor - Quick Couplings (4l pp version) - Aspiration Hand Set VHC with Protection Filter - Operators Manual - Power Cord - 1 Year Manufacturer's Warranty

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Scilogex SCI20-S, Overhead LED Digital Stirrer Bundle, 110-220V Stirring Capacity 20L Viscosity Maxi (more)mum 10,000mPas Speed Range 50 to 2,200 RPM Features - A wide range of speed from 50 to 2200rpm - Brushless DC motor for long life and maintenance free - Analog speed controls displayed on the LED display for monitoring actual speed - High torque for viscous medium stirring - Over torque protection automatically stops the motor - Safety circuits allow for safe stop function in anti-stall or overload condition - A through-shaft design allows for easy adjustment of the impeller position - In the event of power loss, the stirrer will resume stirring at the preset speed when the power returns - Pass through stirrer rods accepted - cTUVus approved for UL and CSA Scilogex overheard stirrers can accomplish the most demanding tasks and provide high safety and increase performance. They are widely used in chemical synthesis, pharmaceutical synthesis, and physical and chemical analysis, as well as petrochemical industries. These products have a high degree of reliability and performance, and are protected by a two year manufacturer’s warranty. INCLUDED: The Scilogex SCI20-S, Overhead LED Digital Stirrer Bundle, 110-220V includes: - 18900071 Stainless Steel Cross Stirrer - 18900131 Stand - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Motic PX43MET Trinocular Inverted Industrial Microscope Objectives S-APO BD 5X, 10X, 20X, 50X Objec (more)tives Optical System Color Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - DIC for better depth imaging. - Brightfield and Darkfield contrast methods to ensure compatibility with a variety of applications. - 360° Swivel Range guarantees effective use of laboratory space. - Can be used with SLR and DSLR Camera via 2.5x and 4x Camera Eyepieces. - Motic ECO Smart Sense is an infrared sensor built into the stand which detects whether or not there is a user working in front of the microscope. Motic’s PX43MET is a professional Inverted Metallurgical microscope designed to inspect polished cross-sections as well as larger, bulkier materials samples. The microscope is a best fit for automotive, machinery, and metal fabrication industries and similar fields. INCLUDED: The Motic PX43MET Trinocular Inverted Industrial Microscope includes: - Plan S-APO BD 5X, 10X, 20X, 50X Objectives - 12.5x7.5inch stage with metal plate - Quintuple Revolving Nosepiece - Fine Focus Knob - UC-WF 10X/FN22 Eyepieces - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty