Lej mbq 52 ac 52ac-z / 310.26E Power Supply Vorschaltgerät

3,500 V, 400 mA, 200 W operation 9 program memories with 4 programmable independant break parameter (more)s. Vh or mAh integration and dl/dt break function. Can be used for analytical and preparative IEF, PAGE, SDS-PAGE, 2-D techniques, immunoelectrophoresis, DNA sequencing and blotting. 100-132 VAC / 198-264 VAC, 50/60 Hz, 300 W

The PowerPac Basic power supply is designed to provide constant voltage or current electrophoresis a (more)pplications. The power supply operates at the value specified for the constant parameter, with limits for the other parameters. To prevent damage to the electroferese cell, the PowerPac Basic provides automatic crossover to constant current or constant voltage depending on which set limit is first reached. If the set limit of the non constant parameter is reached, the power supply will switch, making the limiting non constant parameter the new constant. Output specifications: Voltage: Adjustable from 10 to 300 volt, in 1 volt increments Current: Adjustable from 4 to 400 mA, in 1 mA increments Power: 75 W

Spectra Physics  2020-45 Laser with 2560 Power Supply & 2270 Control Box This system was r (more)emoved from a university lab where it was surplus to requirements. Included are; 1 x Spectra Physics Laser Model 2025-45The unit is in good cosmetic condition but we were not able to power on the unit as it had been hardwired and disconnected from its previous location. 1 x Spectra Physics Power supply Model 2560We were unable to power this up as it has been previously hard wired. It is in good cosmetic condition but has marks from dust and grime. The unit is supplied with Keys. 1 x Spectra Physics Control Box Model 2270The unit is in good cosmetic condition but we were not able to power the unit as the power supply powers the unit.

The certified intrinsically safe PM02.EX power supply, manufactured by RADWAG, has been designed to  (more)power the HRP.EX. PM02.EX power supply comes in two designs: PM02.EX-1-2: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM02.EX-2-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. The certified intrinsically safe PM01.EX power supply, manufactured by RADWAG, has been designed to power the HX5.EX indicator. PM01.EX power supply comes in two designs: PM01.EX-1: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA.

The certified intrinsically safe PM01.EX power supply, manufactured by RADWAG, has been designed to  (more)power the HX5.EX indicator. PM01.EX power supply comes in two designs: PM01.EX-1: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. The certified intrinsically safe PM02.EX power supply, manufactured by RADWAG, has been designed to power the HRP.EX. PM02.EX power supply comes in two designs: PM02.EX-1-2: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM02.EX-2-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA.