Lasos HeNe San 7460 Laser Power Supply Lab

2x EV Sx300 Speakers Lab These items were removed from a university lab where they were surplus to r (more)equirement. They are both in good cosmetic condition, however, we are unable to test them as we do not have the required power supply cables. Power supply cables are not included.

Spectra Physics Mai Tai HR067 Laser and J80-8SS-28K Power Unit This system was removed from a labora (more)tory where it was surplus to requirements. The system is in very good cosmetic condition. The laser power supply powered on with cooling fans running, the display screen shows successful self-tests, and system details are displayed. However, according to the previous owner, "The FLIM card works but the multiphoton laser doesn't. At last inspection it would required £30K to repair the laser."  Therefore, no further testing was carried out, and it is listed as Spares/Repair. Includes: - Spectra Physics Mai Tai (Serial No. 3133, Year: 2007) - Spectra Physics Laser Power Unit (Part No. J80-8SS-28K-08, Serial No. 130906, Year: 2006)

VG Micromass Programmed Power Supply  Model - M18A w/  M426 Analogue Ratio Unit These unit (more)s were removed from another system. VG Micromass Programmed Power SupplyModel - M18ASN - 1403-13We were unable to plug this in to test. It requires an adapter that we do not have. VG Micromass Analogue Ratio UnitModel - M426SN - 1421-02Powers on

Hoefer PS600 Electrophoresis Power Supply Voltage 10 to 600 V in 1 V step Current 4 to 750 mA in 1 m (more)A steps Maximum Wattage 150 W Features - Constant voltage or constant current mode with automatic crossover - 5 to 600 V, 3 to 750 mA, 150 W - Four sets of 4 mm output jacks - Ideal choice for most electrophoresis techniques - Continuous runs or 999 minute timer - Automatic recovery after power failure - Open circuit detection - Short circuit protection The Hoefer PS600 Electrophoresis Power Supply is a robust midrange solution designed for a wide range of electrophoresis and blotting techniques, including large format and high throughput applications. Featuring a compact design, large handle, and user-friendly interface, the PS600 is easy to set up and operate in any lab setting. Its large, easy-to-read LED display allows for simple configuration of constant voltage or current parameters, timer settings up to 999 minutes, and effortless initiation of runs. With a power output range of 5 to 600 V and 3 to 750 mA, this unit provides a dependable 150 W of maximum power. The PS600 supports three key modes of operation: Constant Voltage Mode, where the power supply maintains the user-selected voltage by adjusting the current flow; Constant Current Mode, where the supply maintains the chosen current by modulating the voltage supplied; and Automatic Crossover, which seamlessly shifts between modes when the constant parameter cannot be sustained due to power limits. Additional features such as automatic recovery after power failure, short circuit and open circuit protection, and four sets of 4 mm output jacks add to its versatility and safety. Ideal for both continuous and timed operations, the Hoefer PS600 ensures reliable performance for various electrophoresis applications. INCLUDED: The Hoefer PS600 Electrophoresis Power Supply includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hoefer PS200HC High Current Electrophoresis Power Supply Voltage 5 to 200 V in 1 V step Current 10 t (more)o 2000 mA in 1 mA steps Maximum Wattage 200 W Features - Constant voltage or constant current mode with automatic crossover - 5 to 200 V, 10 to 2000 mA, 200 W - Four sets of 4 mm output jacks - Ideal choice for blotting applications - Continuous runs or 999 minute timer - Automatic recovery after power failure - Open circuit detection - Short circuit protection The Hoefer PS200HC High Current Electrophoresis Power Supply is an essential tool for large electrophoretic blotting applications and low voltage electrophoresis runs. Its compact design, large handle, and user-friendly interface make setup and operation simple, ensuring seamless integration into any lab. Featuring a large, easy-to-read LED display, the PS200HC allows users to set constant voltage or current parameters, adjust the timer up to 999 minutes, and start runs with ease. With a power range of 5 to 200 V and 10 to 2000 mA, this power supply delivers up to 200 W of reliable performance. The PS200HC operates in three distinct modes: Constant Voltage Mode, where the power supply maintains the user-selected voltage by automatically adjusting the current flow; Constant Current Mode, where it maintains the selected current flow by adjusting the voltage supplied; and Automatic Crossover, which ensures that when the constant parameter (voltage or current) cannot be maintained due to operating limits, the system switches to maintaining the other parameter. Key features such as automatic recovery after power failure, short circuit and open circuit protection, and four 4 mm output jacks enhance its flexibility and safety. Designed for both continuous operation and timed runs, the PS200HC is the ideal choice for dependable, high-current electrophoresis applications. INCLUDED: The Hoefer PS200HC High Current Electrophoresis Power Supply includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

HI-7662 Temperature Probe HANNA new Temperature probe for use with the HACCP Compliant Salinity Fo (more)odcare Meter HI-931101.

Lab Scale Fermenter: Bio-Age Bio-Spin Series 05A Lab This item was removed from a university where i (more)t was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Accuris MR9620 SmartReader Multimode Microplate Reader w/ PC Software Included Detection Modes Absor (more)bance, Fluorescence, Luminescence Microplate Formats 6, 12, 24, 48, 96, and 384-well Plate Incubation Ambient +4°C to 45°C Features - Intuitive, 10-inch color touch screen - Stand-alone system with optional PC software (FDA CFR Part 11) - Monochromator-based system for UV through visible absorbance - Filter module system for fluorescence assays - Advanced PMT detector for luminescence assays - Optional automatic injection modules for flash luminescence - 2 Year Manufacturer's Warranty