High Voltage Power Supply Units - Spellman Part no. X3230 - XSTAR - 1505S24HN

Output: 0 to 250 V DC, 2.5 A Dimensions (DxHxB): 294 x 228 x 131 mm

Varian 7000 FT-IR Spectrometer with FTS 6000 Power Supply This was removed from a university lab wh (more)ere it was surplus to requirements. The unit powers up but we were unable to test it further without the software. It is in good cosmetic condition with marks from use. Included are; Varian SpectrometerModel - 7000 FT-IRSN - 46040-409 Varian Power SupplyModel - FTS 6000SN - PS-0391-0806

Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply Transfer Area Up to 14 x 16 cm Maximu (more)m Power Settings 30 V, 500 mA, 15 W Maximum Gel Capacity 4 Mini Gels Features - Intelligent built-in power supply—prevents the stack from overheating by monitoring the transfer status - Requires minimal current—does not generate excessive heat that can dry out the transfer stack and halt transfer or damage transfer units - Durable iridium oxide and stainless steel electrodes—allow for contamination free, consistent transfer - Vented electrodes—prevent build up of bubbles which may impair transfer - Minimal buffer requirements—reagent cost and preparation time are reduced The Hoefer TE70XP Semi-Dry Transfer Unit with Built-In Power Supply is an innovative system designed for the rapid and efficient transfer of proteins from polyacrylamide gels onto nitrocellulose or PVDF membranes. Featuring an intelligent built-in power supply, the TE70XP monitors transfer status in real-time, automatically halting the process to prevent overheating of the stack. With a 14 x 16 cm transfer area, the TE70XP accommodates up to four mini gels in a stacked format, allowing for high-throughput transfers without compromising quality. This semi-dry transfer unit is equipped with durable iridium oxide and stainless steel electrodes, ensuring contamination-free, consistent results. Vented electrodes prevent bubble buildup, enhancing the reliability of each transfer. Designed to minimize buffer requirements, the TE70XP reduces reagent costs and preparation time, making it a cost-effective solution for busy labs. Its robust construction includes a molded base with a platinum-coated titanium anode and a hinged lid with a stainless steel cathode, ensuring long-lasting performance. INCLUDED: The Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply includes: - Molded Base with Platinum-Coated Titanium Anode and Internal Power Supply - Hinged Lid with Stainless Steel Cathode - Blotting Paper (14 x 16 cm), 25 sheets - Porous Cellophane (20 x 35.5 cm), 50 sheets - Mylar® Masks (16.5 x 18.5 cm), 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Power supply Data Test Atom 500. Of 0 to 500 V. the Four outputs of connection. Specifications: 220 (more) V; 50 Hz

Refurbished Hettich MIKRO 220 R, refrigerated microcentrifuge. Great condition - great price. 6 mont (more)hs warranty. Technical data: - Coolable microlitre centrifuge - Max. 18,000 rpm/31,514 x g (depending on rotor) - External dimensions (WxDxHxD): 330 x 650 x 313 mm (height with lid closed) Features: - Membrane keyboard for fast data input, rotary knob, metal housing and cover, stainless steel rotor chamber, viewing window in cover - Memory function for 10 programs - Nine preselectable acceleration or deceleration phases or unbraked deceleration - MIKRO 220 R: Stepless adjustment from -20 to +40 °C, Fast Cool function - Security features: Lid locking and fixing while rotor is running, emergency release for lid, overheating protection for motor, chamber overheating protection, unbalance switch-off, automatic rotor recognition, lid holding device

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

The certified intrinsically safe PM01.EX power supply, manufactured by RADWAG, has been designed to  (more)power the HX5.EX indicator. PM01.EX power supply comes in two designs: PM01.EX-1: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. The certified intrinsically safe PM02.EX power supply, manufactured by RADWAG, has been designed to power the HRP.EX. PM02.EX power supply comes in two designs: PM02.EX-1-2: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM02.EX-2-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA.

Gilson MyPIPETMAN Select Multichannel P12x300, 20-300 uL PipetteFeatures - Designed to be ergonomic, (more) safe, and reliable while remaining lightweight and well-balanced - Elegant design with textured effect for better grip - Built-in ejection system with an integrated lever provides reduced tip ejection forces compared to direct ejection systems - Trilock volume-locking system enables users to choose different positions when setting the volume - Fully autoclavable without disassembly for maximum convenience and protection from contamination - Complies with the requirements of the ISO 8655 standard - Volume range of 20 to 300 uL - 3 Year Manufacturer's Warranty

Accuris MR9620-CFR SmartReader PC Security Software (21 CFR Part 11 Compliant) TThe Accuris MR9620-C (more)FR SmartReader PC Security Software (21 CFR Part 11 Compliant) allows for remote programming & operation of the instrument via cable connection. Data from the instrument is automatically uploaded to the connected PC for further analyses. INCLUDED: The Accuris MR9620-CFR SmartReader PC Security Software (21 CFR Part 11 Compliant) includes: - Email Code to Download Software - Manufacturer's Documentation - 2 Year Manufacturer's Warranty