Delta Elektronika E0300-0.1 Power supply 0-300 V & 0-100 mA

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The PowerPac Basic power supply is designed to provide constant voltage or current electrophoresis a (more)pplications. The power supply operates at the value specified for the constant parameter, with limits for the other parameters. To prevent damage to the electroferese cell, the PowerPac Basic provides automatic crossover to constant current or constant voltage depending on which set limit is first reached. If the set limit of the non constant parameter is reached, the power supply will switch, making the limiting non constant parameter the new constant. Output specifications: Voltage: Adjustable from 10 to 300 volt, in 1 volt increments Current: Adjustable from 4 to 400 mA, in 1 mA increments Power: 75 W

Spectra Physics Mai Tai HR067 Laser and J80-8SS-28K Power Unit This system was removed from a labora (more)tory where it was surplus to requirements. The system is in very good cosmetic condition. The laser power supply powered on with cooling fans running, the display screen shows successful self-tests, and system details are displayed. However, according to the previous owner, "The FLIM card works but the multiphoton laser doesn't. At last inspection it would required £30K to repair the laser."  Therefore, no further testing was carried out, and it is listed as Spares/Repair. Includes: - Spectra Physics Mai Tai (Serial No. 3133, Year: 2007) - Spectra Physics Laser Power Unit (Part No. J80-8SS-28K-08, Serial No. 130906, Year: 2006)

APC UPS Uninterruptible Power Supply Model SRT6KXLI This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with minor marks.

Stanton Redcroft 1000ºc Tube Furance + Power Supply/Controller Lab This item was removed from a univ (more)ersity where it was surplus to requirement. It is in good cosmetic condition and in good working order.

Hoefer PS200HC High Current Electrophoresis Power Supply Voltage 5 to 200 V in 1 V step Current 10 t (more)o 2000 mA in 1 mA steps Maximum Wattage 200 W Features - Constant voltage or constant current mode with automatic crossover - 5 to 200 V, 10 to 2000 mA, 200 W - Four sets of 4 mm output jacks - Ideal choice for blotting applications - Continuous runs or 999 minute timer - Automatic recovery after power failure - Open circuit detection - Short circuit protection The Hoefer PS200HC High Current Electrophoresis Power Supply is an essential tool for large electrophoretic blotting applications and low voltage electrophoresis runs. Its compact design, large handle, and user-friendly interface make setup and operation simple, ensuring seamless integration into any lab. Featuring a large, easy-to-read LED display, the PS200HC allows users to set constant voltage or current parameters, adjust the timer up to 999 minutes, and start runs with ease. With a power range of 5 to 200 V and 10 to 2000 mA, this power supply delivers up to 200 W of reliable performance. The PS200HC operates in three distinct modes: Constant Voltage Mode, where the power supply maintains the user-selected voltage by automatically adjusting the current flow; Constant Current Mode, where it maintains the selected current flow by adjusting the voltage supplied; and Automatic Crossover, which ensures that when the constant parameter (voltage or current) cannot be maintained due to operating limits, the system switches to maintaining the other parameter. Key features such as automatic recovery after power failure, short circuit and open circuit protection, and four 4 mm output jacks enhance its flexibility and safety. Designed for both continuous operation and timed runs, the PS200HC is the ideal choice for dependable, high-current electrophoresis applications. INCLUDED: The Hoefer PS200HC High Current Electrophoresis Power Supply includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

The dual weighing workstation is intended for microbalances and analytical balances. It is equipped  (more)with two lockers for a computer and an emergency UPS power supply or a power strip. The workstation also has a sliding shelf for a keyboard and a mouse. It additionally features ventilation openings and a base for a monitor. The separated anti-vibration part provides protection against vibration, and the feet feature rubber tips to facilitate table levelling on uneven floors. The structure of the workstation is made of steel, the two tabletops that allow two balances to be used simultaneously are made of stone, and the working part of the tables is made of MDF.

M1 Mass Standard - rectangular weights. Nominal value - 50 kg.

Ohaus 30314824 2 x 3 MTP Swing Out Rotor w/ Buckets The Ohaus 30314824 2 x 3 MTP Swing Out Rotor w/  (more)Buckets accommodates a capacity of up to 2 x 3MTP. This rotor is designed for use with Ohaus FC5816, FC5816R, FC5718, FC5718R, FC5916, FC5916R, FC5714, and FC5720R series centrifuges. The Ohaus 30314824 2 x 3 MTP Swing Out Rotor reaches speeds up to 4,500 RPM with a maximum RCF of 2,716 x g. INCLUDED: The Ohaus 30314824 2 x 3 MTP Swing Out Rotor w/ Buckets includes: - Ohaus 30314824 2 x 3 MTP Swing Out Rotor w/ Buckets - Manufacturer's Documentation - 1 Year Manufacturer's Warranty