Bio-Rad PowerPac Basic Power Supply

This listing is for a Consort EV261 Power SupplyAll Consort Maxi Series (EV200) power supplies have  (more)four output terminals for up to four simultaneous runs. Powerful microprocessor control allows complex programming, while manual mode permits the setting of voltage, current, power and time for routine electrophoretic runs. The parameters may also be changed temporarily without interrupting the run. Programming–up to 9 different programs, each with 9 steps, can be stored in the nonvolatile memory for future recall. Timer–can be set to automatically terminate the run and sound an alarm when the allocated time or volt hours has elapsed. Automatic cross-over–each model has constant voltage, constant current and constant power capabilities with automatic cross-over while showing which parameter is kept constant. Automatic recovery after mains failure–after restoration of power, the instrument will automatically continue the run for the remaining time. Data Transfer–optional data acquisition/control software for PC is available to visualise and examine the stored run details, store and program the methods, add notes to the run, identify the unit, copy or delete programs in the unit's memory. Safety precautions –the AC line is automatically disconnected from the high voltage transformer when a ground leakage path is detected protecting the user from potential shock. Other safety features include protection against any overload including accidental short circuit of the output and voltage increases smoothly.

Intellipower Uninterruptible IQ2000V-C-DiAC-Isol-PFC Power Supply Lab This item was removed from a u (more)niversity where it was surplus to requirement. It is in good cosmetic condition and powers up, we are unable to test it further at our facility.

Zeiss 47 09 14 Microscope Trinocular Head with Power Supply and Light Box This was removed from a un (more)iversity lab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with marks from use. The microscope features: 1 x Trinocular head 47 30 28 2 x Zeiss KPL W10x18 eyepieces 46 40 43 4 x Zeiss objectives: Neofluar 160/- 16/0.40, F100/1.25 Oil 46 19 05, Neofluar 160/- 63/1.25 Oel, NFL 160/0.17 40/0.75 A Zeiss Monocular viewer fitted with 43 60 37 top piece and a Kpl W 12.5x/18 inner lens Power supply included for the top lamp.A lower lamp power supply is not included.

Olympus U-RFL-T Microscope Power Supply + U-LH100HG Lamp These were removed from a university lab wh (more)ere they were surplus to requirements. The units are in good cosmetic condition, but they do have various marks and signs of use. The power supply and lamp both power up fine. Included are;1 x Olympus U-RFL-T.1 x Olympus L-LH100HG. We cannot confirm how long the lamp has been used, as the timer was reset before we received the item.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Thermo Scientific Cimarec-i Telesystem 15-40 Multipoint Shaker New equipment in its original packagi (more)ng Reference: Cimarec i 50088036 Set comprising a magnetic induction stirrer (without motor) and a remote control box. 15 stirring stations Ideal for use in immersion in water baths up to 50°C Automated start-up for progressive acceleration of the magnetic bar Perfect for use in incubators and climatic chambers Delivered complete with Telemodul control box Telesystem 15.40: With Telemodul 40 C remote control box Speed ​​range: 100 to 2000 rpm Volume: up to 1200 ml per stirring station Dimensions: L x W x H: 240 x 420 x 35 mm Protection: IP 68 Weight: 8kg Ambient conditions: Permissible temperature: -10 to +56°C / RH: 100% Gross weight: 11.677 kg Gross dimensions: 57.5 x 39 x 34.5 cm

Mini-rotator Bio RS-24 provides vertical rotation of the platform. The rotator is an ideal instrumen (more)t for preventing blood coagulation in tubes and for fulfilment of procedures of biological components extraction. The device is simple to operate; it is designed as a low cost solution. Rotator can be used in cold rooms or incubators, operating at ambient temperature range +4°C to +40°C. Speed control range: 5 – 30 RPM Digital time setting: 1 min–24 hrs/non–stop Vertical rotation movement: overhead, 360° Maximum continuous operation time: 8 hrs Overall dimensions (WxDxH): 325 x 190 x 155 mm Weight: 1.4 kg

Max speed: 16400 rpm Temperature range: -9°C to 40°C Max centrifugal force: 25000 rcf Max kinetic en (more)ergy: 6100 Nm Max density of samples: 1.2 g/ml Dimensions (HxWxD): 250 x 310 x 597 mm Weight: 34.8 kg Equipped with: 1x Eppendorf FA-45-30-11 Aerosol-tight lid 1x Eppendorf FA-45-30-11 fixed angle rotor (max 14000 rpm; 30x 1.5 mL/2.0 mL micro tube capacity)

Scientific Industries Mini-300 Orbital-Genie, Adhering Mat Heavy duty standard footprint Orbital Sha (more)ker with Adhering Mat provides a flat platform ideal for use with open containers, bottles, T-flasks, etc. Patented material is naturally adhering.Scientific Industries Mini-300 Orbital-Genie, Adhering Mat Specifications Speed (RPM) 35– 300 RPM Orbit 19mm Product Weight 10.25 Kg (22.6 lbs.) Overall (D x W x H) 350 x 350mm (14 x 14in) Platform Dimension 315 x 315mm (12.5 x 12.5in) Warranty 24 months Markings CE

Hermle Z327-K Refrigerated Centrifuge Speed Range 200 to 18,000 RPM Maximum Capacity 4 x 200ml Tempe (more)rature Range -20°C to 40°C Features - Maintenance-free induction drive - Microprocessor with large LCD display - Motor driven lid lock - Automatic radio-frequency rotor identification system (RFID) with over speed protection, immediately upon rotor insertion - Active imbalance identification and cut-off (rotor specific) - CFC-free refrigeration system (Z327-K) - A large variety of rotors and accessories - Audible signal at the end of each run with several melody options - Noise level under 63 dBA at max. speed - Manufactured according to international safety regulations, i.e. IEC 61010 - Rotor exchange is easy to handle - Stainless steel chamber Both the Z327 and the refrigerated Z327-K offer a wide assortment of rotor options (up to 19), making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high-volume fixed angle rotors is very simple and can be done in a matter of seconds. The Z327-K features rear mounted refrigeration system, optimized for saving space on the lab bench at only 40 cm wide! Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z327-K Refrigerated Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty