Bio-Rad PowerPac Basic Power Supply

The ZOOM Dual Power is a microprocessor-controlled programmable power supply capable of running both (more) high voltage-low current and high current-low voltage applications concurrently. The high voltage-low current section is ideal for sample fractionation, IPG strips, IEF, and DNA sequencing applications. The low voltage-high current section is for SDS-PAGE, native PAGE, second-dimension SDS-PAGE, DNA-RNA electrophoresis, and blotting applications. Four sets of output jacks on each side of the unit allow for multiple apparatus to run simultaneously, offering greater workflow efficiency and higher sample throughput. Some of the important features of the ZOOM Dual Power unit include: High voltage-low current and low voltage-high current sides can be used independently and concurrently Multiple output jacks allow for the simultaneous running of up to four electrophoresis apparatus on each side of the unit Memory stores up to 30 programs (15 programs per side) of up to six steps per program. Step and ramp functions for discrete and gradual changes of electrical parameters No Load detection alarm system can be disabled to power high voltage applications that require very low current Voltage: 1 – 3500 V,  1V increments Current: 0.01 – 10.0 mA, 0.01 mA increments Power: 0.1 –  35W, 0.1 W increments

The PowerPac Basic power supply is designed to provide constant voltage or current electrophoresis a (more)pplications. The power supply operates at the value specified for the constant parameter, with limits for the other parameters. To prevent damage to the electroferese cell, the PowerPac Basic provides automatic crossover to constant current or constant voltage depending on which set limit is first reached. If the set limit of the non constant parameter is reached, the power supply will switch, making the limiting non constant parameter the new constant. Output specifications: Voltage: Adjustable from 10 to 300 volt, in 1 volt increments Current: Adjustable from 4 to 400 mA, in 1 mA increments Power: 75 W

The PowerPac Basic power supply is designed to provide constant voltage or current electrophoresis a (more)pplications. The power supply operates at the value specified for the constant parameter, with limits for the other parameters. To prevent damage to the electroferese cell, the PowerPac Basic provides automatic crossover to constant current or constant voltage depending on which set limit is first reached. If the set limit of the non constant parameter is reached, the power supply will switch, making the limiting non constant parameter the new constant. Output specifications: Voltage: Adjustable from 10 to 300 volt, in 1 volt increments Current: Adjustable from 4 to 400 mA, in 1 mA increments Power: 75 W

V.G. Electronics Duoplasmatrom Arc Control & Caesium Source Supply II Lab These items were remov (more)ed from a university where they were surplus to requirement. Both units are in good cosmetic condition and powered on, we are unable to test them further at our facility.

APC UPS Uninterruptible Power Supply Model SRT6KXLI This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with minor marks.

This Beckman Coulter JA-25.50 Fixed Angle Rotor was removed from a university lab where it was surpl (more)us to requirements. The unit is in good cosmetic condition but has not been tested. It will need to be inspected for safety by a qualified engineer before it can be used. Capacity: 8 x 50 mLMax RPM: 25,000

Agilent 7890A GC System This system was removed from a university lab where it was surplus to requir (more)ements. The system is in fair cosmetic condition, with a few marks and scratches. It powers on, but no further testing has been conducted due to the absence of a PC and software. According to the previous owner, there are no known faults, but the system has been out of use for a few years and would likely need recommissioning. Specifications: - Serial No.: CN10809012 - Model: G3440A

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database – access to databases Function – access to basic functions F1 and F2 – programmable function keys and menu navigation keys Reports – access to database of drying process reports Profile – access to parameters settings Sample – access to products database

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

Branson SFX550 Sonifier w/ 1/2" HornFeatures - 20 kHz ultrasonics for quiet tabletop operation. - Sa (more)mple sizes from 0.2 to 1000 mL. - High-efficiency, handheld and stand-mountable converters require no internal cooling. - Scrollable, multifunction screen with pushbuttons. - Continuous or pulsed ultrasonics. - Amplitude control range from 10 to 100%. - Microtip mode limits amplitude to 70% to extend tool life. - Control modes include time, temperature, and energy. - Advanced energy control mode delivers precise energy input in continuous or pulse modes. The fully digital control screen allows the user to quickly and effortlessly select control settings, power level, and sonification duration. The Branson SFX sonifer gives users ultimate control with an amplitute range of 10 to 100% along with continous or pulsed ultrasonics. These smaller, highintensity tips are ideal for processingsmaller samples in Eppendorf vialsor similar vessels. Sizes range from3/32" to 1/4". The SFX250 and SFX550 are part of the new SFX Series of Sonifiers from Branson, designed to bring the industry’s most advanced sample-processing capabilities to your laboratory. The SFX Series brings a new level of ease, precision, and repeatability with advanced energy and temperature control modes, process monitoring capabilities, and programming features. In Energy Mode, the SFX Series power supply manages the processing cycle to deliver a precise, user-determined input of ultrasonic energy (measured in joules), either continuously or pulsed. The SFX Series automatically compensates for any variability, extending or shortening the cycle as needed to deliver the precise energy output. With true temperature control (requires separate temperature probe), the SFX Series power supply maintains the temperature of the sample to within a user-specified range, automatically adjusting the ultrasonic pulse length to regulate the temperature rise and prevent overheating. For assured repeatability and precision on a greater scale, the SFX Series enables users to create and store up to 20 sample-processing programs. Program parameters include continuous or pulsed ultrasonics; time, energy, or temperature control modes; pulse on-time/energy, off-time, and total on-time/energy; or amplitude as a percentage. In operation, Sonifier SFX Series monitors ongoing processes on a scrollable, digital screen, providing continuous updates of key variables including power level, energy usage, sample temperature, and experiment progress. Features: Click Here to View Product Video INCLUDED: The Branson SFX550 Sonifier w/ 1/2" Horn includes: - Converter - 1/2" Horn - Cable - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty