Bio-Rad PowerPac Basic Power Supply

This listing is for a Consort EV261 Power SupplyAll Consort Maxi Series (EV200) power supplies have  (more)four output terminals for up to four simultaneous runs. Powerful microprocessor control allows complex programming, while manual mode permits the setting of voltage, current, power and time for routine electrophoretic runs. The parameters may also be changed temporarily without interrupting the run. Programming–up to 9 different programs, each with 9 steps, can be stored in the nonvolatile memory for future recall. Timer–can be set to automatically terminate the run and sound an alarm when the allocated time or volt hours has elapsed. Automatic cross-over–each model has constant voltage, constant current and constant power capabilities with automatic cross-over while showing which parameter is kept constant. Automatic recovery after mains failure–after restoration of power, the instrument will automatically continue the run for the remaining time. Data Transfer–optional data acquisition/control software for PC is available to visualise and examine the stored run details, store and program the methods, add notes to the run, identify the unit, copy or delete programs in the unit's memory. Safety precautions –the AC line is automatically disconnected from the high voltage transformer when a ground leakage path is detected protecting the user from potential shock. Other safety features include protection against any overload including accidental short circuit of the output and voltage increases smoothly.

This listing is for a Bio-Rad PowerPac Basic Power Supply. The unit is in full working condition an (more)d is ready for immidate realese. Enhance your electrophoresis experiments with the Bio-Rad PowerPac Basic Power Supply, a compact and versatile solution designed specifically for horizontal and vertical gel electrophoresis applications. This reliable power supply offers exceptional performance, making it an essential tool for any laboratory. Key Features: Adjustable Output Range: With a voltage range of 10-300V, fully adjustable in 1V increments, the PowerPac Basic allows for precise control tailored to your specific electrophoresis needs. Programmable Functionality: Enjoy the flexibility of timer control and the choice between constant voltage or constant current output, ensuring optimal conditions for your experiments. Automatic Crossover: This feature automatically switches between constant voltage and constant current, protecting your electrophoresis cell from potential damage during operation. User-Friendly Display: The 3-digit LED display provides clear visibility of settings and real-time monitoring, simplifying the operation process. Technical Specifications: Operating Range: 0-40°C Dimensions: 21 x 24.5 x 6.5 cm Weight: 1.1 kg Applications: The PowerPac Basic Power Supply is ideal for a wide range of applications, including: Submerged horizontal gel electrophoresis Mini vertical gel electrophoresis DNA electrophoresis in agarose gels Protein electrophoresis in polyacrylamide gels Benefits: Compact Design: Its lightweight and compact form factor makes it easy to integrate into any lab setup without taking up valuable space. Reliable Performance: Designed for basic applications, this power supply ensures consistent results, enhancing the quality of your electrophoresis experiments. Choose the Bio-Rad PowerPac Basic Power Supply for a dependable, user-friendly, and efficient solution to all your electrophoresis needs. Experience the difference in your laboratory today!

Hoefer PS200HC High Current Electrophoresis Power Supply Voltage 5 to 200 V in 1 V step Current 10 t (more)o 2000 mA in 1 mA steps Maximum Wattage 200 W Features - Constant voltage or constant current mode with automatic crossover - 5 to 200 V, 10 to 2000 mA, 200 W - Four sets of 4 mm output jacks - Ideal choice for blotting applications - Continuous runs or 999 minute timer - Automatic recovery after power failure - Open circuit detection - Short circuit protection The Hoefer PS200HC High Current Electrophoresis Power Supply is an essential tool for large electrophoretic blotting applications and low voltage electrophoresis runs. Its compact design, large handle, and user-friendly interface make setup and operation simple, ensuring seamless integration into any lab. Featuring a large, easy-to-read LED display, the PS200HC allows users to set constant voltage or current parameters, adjust the timer up to 999 minutes, and start runs with ease. With a power range of 5 to 200 V and 10 to 2000 mA, this power supply delivers up to 200 W of reliable performance. The PS200HC operates in three distinct modes: Constant Voltage Mode, where the power supply maintains the user-selected voltage by automatically adjusting the current flow; Constant Current Mode, where it maintains the selected current flow by adjusting the voltage supplied; and Automatic Crossover, which ensures that when the constant parameter (voltage or current) cannot be maintained due to operating limits, the system switches to maintaining the other parameter. Key features such as automatic recovery after power failure, short circuit and open circuit protection, and four 4 mm output jacks enhance its flexibility and safety. Designed for both continuous operation and timed runs, the PS200HC is the ideal choice for dependable, high-current electrophoresis applications. INCLUDED: The Hoefer PS200HC High Current Electrophoresis Power Supply includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The certified intrinsically safe PM01.EX power supply, manufactured by RADWAG, has been designed to  (more)power the HX5.EX terminal. PM01.EX power supply comes in two designs: PM01.EX-1: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. The certified intrinsically safe PM02.EX power supply, manufactured by RADWAG, has been designed to power the HRP.EX. PM02.EX power supply comes in two designs: PM02.EX-1-2: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM02.EX-2-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA.

3,500 V, 400 mA, 200 W operation 9 program memories with 4 programmable independant break parameter (more)s. Vh or mAh integration and dl/dt break function. Can be used for analytical and preparative IEF, PAGE, SDS-PAGE, 2-D techniques, immunoelectrophoresis, DNA sequencing and blotting. 100-132 VAC / 198-264 VAC, 50/60 Hz, 300 W

Yamato IC-903CR General Purpose Incubator with Communication Port 567L, 115V Temperature Range Room (more) temp. +5 to 80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 567L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Economical general purpose 567L natural convection incubator with communication port. Dual door system permits contents to be viewed easily without disrupting atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5-80°C INCLUDED: The Yamato IC-903CR General Purpose Incubator with Communication Port 567L, 115V includes: - 8 x Shelves w/ 16 x Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Cytocentrifuge based on Hettich Universal 320. Includes 1626 angle rotor for 6 vessels. Vmax: 4,000  (more)rpm; 2,039 g. Includes only 2 vessels with capacity for 4 cytochambers (2 per vessel). Cytochambers (not included) sample capacity from 1 to 8 mL. Maximum capacity 12 cytochambers. More vessels can be independently budgeted to complete maximum capacity. Not refrigerated. Analog rotary control and digital display (10 programs). Emergency stop. Acoustic signal. Includes manual. The Hettich cytology system makes it possible to produce a high-quality cytology preparation from a wide variety of body fluids. With large volume cytology chambers it is possible to process sample volumes of 8 ml or 2 x 8 ml. This makes cell concentration superfluous in many cases. On the other hand, when using the two-step procedure, no cells are lost during sedimentation because the cytology chamber is tightly attached to the slide. Drying is carried out in a second centrifugation step when the cells are already attached to the slide. It also allows the specific preparation of dry or wet preparations. Ideal for urinalysis, abdominal & spinal fluids, cysts, biopsies, ascites, Pap tests, CSF, viral infections, bronchial secretions, pleura, pericardium fluid, fine and needle aspiration among others.

Ohaus Guardian 2000 e-G21HSRDS Hotplate Stirrer, 115V The Ohaus Guardian 2000 Series Hotplates, Stir (more)rers, and Hotplate Stirrers are ideal for education and other lab environments that require affordable, everyday fast heating and reliable stirring up to 15L. All three sizes offer simple knob control to easily adjust the heating and stirring functions. The durable housing includes a built-in support rod holder which accepts the optional support rod. Stirring models include PTFE coated stir bars. The Guardian 2000 Series units feature powerful stirring and fast heating at an economical price. Safely heat up to 500°C and stir up to 15L with easy-to-use knob control for simple and reliable everyday heating and stirring in the lab. Designed to last - the rugged metal housing has a spill resistant design for long life in the lab under harsh conditions. The smooth, chemical-resistant ceramic top plate is perfect for easy clean up. Safety is also of utmost importance, and the prominent hot top indicator light illuminates when the heater is above 40°C, keeping the end user safe during all heating applications. INCLUDED: The Ohaus Guardian 2000 e-G21HSRDS Hotplate Stirrer, 115V includes: - PTFE-Coated Stir Bar (2.5 cm) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty