Bio-Rad PowerPac Basic Power Supply

Olympus U-RFL-T Microscope Power Supply + U-LH100HG Lamp These were removed from a university lab wh (more)ere they were surplus to requirements. The units are in good cosmetic condition, but they do have various marks and signs of use. The power supply and lamp both power up fine. Included are;1 x Olympus U-RFL-T.1 x Olympus L-LH100HG. We cannot confirm how long the lamp has been used, as the timer was reset before we received the item.

Leica Leitz 301-185.104-000 Microscope Light Source Power Supply For Microscope HG 50W AC L1/L2 Pmax (more) 320Va BZ:01 Year of manufacture : 2005

The certified intrinsically safe PM02.EX power supply, manufactured by RADWAG, has been designed to  (more)power the HRP.EX. PM02.EX power supply comes in two designs: PM02.EX-1-2: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM02.EX-2-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. The certified intrinsically safe PM01.EX power supply, manufactured by RADWAG, has been designed to power the HX5.EX indicator. PM01.EX power supply comes in two designs: PM01.EX-1: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA.

Accuris myVolt Touch Power Supply The Accuris myVolt Touch is a work horse electrophoresis power sup (more)ply, ideal for efficient separation of nucleic acids and proteins as well as basic western blotting applications. Four pairs of output jacks are wired in parallel for connecting multiple electrophoresis tanks. A color touch screen allows quick setting and monitoring of all run conditions, including run time, voltage, and current. Users can select “Constant Current” or “Constant Voltage” during an electrophoresis run, keeping the chosen parameter fixed as resistance changes. The dual orientation design with rotating display allows the myVolt Touch to be installed in the most convenient location, on a shelf or bench, saving valuable space. The myVolt Touch features a logical user interface. Setting up an electrophoresis run couldn’t be easier; simply touch the parameter to select it, press the “up” and “down” arrows to adjust the value, and then touch “Start”. All parameters are always displayed, with no need to toggle between Time, Voltage or Amperage. In addition the run status is always displayed. Click Here to View Product Video INCLUDED: The Accuris myVolt Touch Power Supply includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Perkin Elmer LC-240 Fluorescence Detector Lab This item was removed from a university where it was s (more)urplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Arctiko PR 650 +2 C / +8 C Glass Door Biomedical Refrigerator Refrigerant R290 Temperature Range  (more) +2 / +8 °C (+35.6 / +46.4 °F) Capacity 24.72 Cu.Ft (700 Liters) Features - Superior performance and temperature stability - High-quality Carel digital controller - Data logger with Bluetooth and NFC interface - High / Low temperature warning alarm - Open door alarm - Power failure alarm (visual and acoustic) - LED inside light (refrigerators models) - Forced air ventilation - Port hole - UL61010 certification - Energy Star rating - 115V/60Hz power - Sizes available from 14.12 cu.ft. up to 49.44 cu.ft. The Arctiko PR 650 upright glass door fridge offers the superior features required for biomedical applications. This model includes a high-quality Carel controller with Bluetooth connection as well as high/low temperature alarms and a built-in data logger.INCLUDED: The Arctiko PR 650 +2 C / +8 C Glass Door Biomedical Refrigerator includes: - Key for Door Lock - Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Countess II Automated Cell Counter is a fully automated cell counter and assay platform that use (more)s state-of-the-art optics and image analysis algorithms to analyze trypan blue-stained cells in suspension. Processing time: ~15 seconds Sample concentration range: 1 x 10⁴ to 1 x 10⁷ cells/mL Particle/cell diameter range: 4 60 µm (particles), 7 – 60 µm (cells) Required sample volume: 10 µL Optics: 1 channel (brightfield) Camera: 5 Mega pixels, 2.5x Optical Magnification

Compact, universal small shaker suitable for shaking tasks with all small vessels. Two operating mod (more)es: Mode A (safe mode with attachment detection) the maximum speed of 3.000 rpm is only reached with the standard attachment in touch mode. When using other attachments the speed is limited to 1.300 rpm. Mode B (without attachment detection) a speed of 3.000 rpm is possible with all attachments. Orbital shaking movement amplitude 4.5 mm Speed 0 – 3000 rpm Dimensions (lxwxh) 148 x 205 x 63 mm Weight 2.9 kg